[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE stable/25.1-n269614-36155813721 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz (3700.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0x9c002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16340865024 (15583 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 9 2 6 10 8 11 4 3 7 5 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] smbios0: <System Management BIOS> at iomem 0x2fb72000-0x2fb7201e [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 350 [...] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xed000000-0xedffffff,0x3fe0000000-0x3fefffffff,0x3ff0000000-0x3ff1ffffff irq 16 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x0fbb) HDA Controller> mem 0xee080000-0xee083fff irq 17 at device 0.1 on pci1 [...] xhci0: <Intel Union Point USB 3.0 controller> mem 0x3ffff00000-0x3ffff0ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Union Point AHCI SATA controller> port 0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xef124000-0xef125fff,0xef127000-0xef1270ff,0xef126000-0xef1267ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme0: <Generic NVMe Device> mem 0xef000000-0xef003fff irq 16 at device 0.0 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 27.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <PCI-PCI bridge> irq 17 at device 1.0 on pci4 [...] pci5: <PCI bus> on pcib5 [...] igc0: <Intel(R) Ethernet Controller I225-V> mem 0xeeb00000-0xeebfffff,0xeec00000-0xeec03fff irq 17 at device 0.0 on pci5 [...] igc0: EEPROM V1.85-0 eTrack 0x800002b5 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib6: <PCI-PCI bridge> irq 18 at device 2.0 on pci4 [...] pci6: <PCI bus> on pcib6 [...] igc1: <Intel(R) Ethernet Controller I225-V> mem 0xee800000-0xee8fffff,0xee900000-0xee903fff irq 18 at device 0.0 on pci6 [...] igc1: EEPROM V1.85-0 eTrack 0x800002b5 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib7: <PCI-PCI bridge> irq 19 at device 3.0 on pci4 [...] pci7: <PCI bus> on pcib7 [...] igc2: <Intel(R) Ethernet Controller I225-V> mem 0xee500000-0xee5fffff,0xee600000-0xee603fff irq 19 at device 0.0 on pci7 [...] igc2: EEPROM V1.85-0 eTrack 0x800002b5 [...] igc2: Using 1024 TX descriptors and 1024 RX descriptors [...] igc2: Using 4 RX queues 4 TX queues [...] igc2: Using MSI-X interrupts with 5 vectors [...] igc2: Ethernet address: ... [...] igc2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib8: <PCI-PCI bridge> irq 16 at device 4.0 on pci4 [...] pci8: <PCI bus> on pcib8 [...] igc3: <Intel(R) Ethernet Controller I225-V> mem 0xee200000-0xee2fffff,0xee300000-0xee303fff irq 16 at device 0.0 on pci8 [...] igc3: EEPROM V1.85-0 eTrack 0x800002b5 [...] igc3: Using 1024 TX descriptors and 1024 RX descriptors [...] igc3: Using 4 RX queues 4 TX queues [...] igc3: Using MSI-X interrupts with 5 vectors [...] igc3: Ethernet address: ... [...] igc3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib9: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] pcib10: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] alc0: <Killer E2500 Gigabit Ethernet> port 0xd000-0xd07f mem 0xeef00000-0xeef3ffff irq 18 at device 0.0 on pci11 [...] alc0: 11776 Tx FIFO, 12032 Rx FIFO [...] alc0: Using 1 MSI message(s). [...] miibus0: <MII bus> on alc0 [...] atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0 [...] atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] alc0: Using defaults for TSO: 65518/35/2048 [...] alc0: Ethernet address: ... [...] pcib12: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xeee00000-0xeee07fff irq 16 at device 0.0 on pci12 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib13: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci13: <ACPI PCI bus> on pcib13 [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xeed00000-0xeed07fff irq 18 at device 0.0 on pci13 [...] xhci2: 32 bytes context size, 64-bit DMA [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] pcib14: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 [...] pci14: <ACPI PCI bus> on pcib14 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] em0: <Intel(R) I219-V SPT-H(2)> mem 0xef100000-0xef11ffff irq 16 at device 31.6 on pci0 [...] em0: EEPROM V0.2-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xce7ff,0xd2800-0xd37ff,0xd3800-0xd47ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] hwpstate_intel8: <Intel Speed Shift> on cpu8 [...] hwpstate_intel9: <Intel Speed Shift> on cpu9 [...] hwpstate_intel10: <Intel Speed Shift> on cpu10 [...] hwpstate_intel11: <Intel Speed Shift> on cpu11 [...] Timecounter "TSC-low" frequency 1847995959 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <NVIDIA GM204 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA GM204 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA GM204 (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA GM204 (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm2: <NVIDIA GM204 (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm3: <NVIDIA GM204 (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] ugen2.1: <(0x1b21) XHCI root HUB> at usbus2 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen1.1: <(0x1b21) XHCI root HUB> at usbus1 [...] uhub0 on usbus2 [...] uhub0: <(0x1b21) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub1 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2 on usbus1 [...] uhub2: <(0x1b21) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] Trying to mount root from cd9660:/dev/iso9660/OPNSENSE_INSTALL [ro]... [...] uhub0: 4 ports with 4 removable, self powered [...] uhub2: 4 ports with 4 removable, self powered [...] uhub1: 26 ports with 26 removable, self powered [...] Root mount waiting for: usbus0 CAM usbus1 [...] ugen0.2: <Generic 4-Port USB 2.0 Hub> at usbus0 [...] uhub3 on uhub1 [...] uhub3: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.23, addr 1> on usbus0 [...] uhub3: MTT enabled [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device USB SanDisk 3.2Gen1 (0x0781:0x5583) [...] ugen1.2: <USB SanDisk 3.2Gen1> at usbus1 [...] umass0 on uhub2 [...] umass0: <USB SanDisk 3.2Gen1, class 0/0, rev 3.20/1.00, addr 1> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:6:0: Attached to scbus6 [...] uhub3: 4 ports with 4 removable, self powered [...] ugen0.3: <Generic USB2.0-CRW> at usbus0 [...] umass1 on uhub3 [...] umass1: <Generic USB2.0-CRW, class 0/0, rev 2.00/57.13, addr 2> on usbus0 [...] umass1: SCSI over Bulk-Only; quirks = 0x4000 [...] umass1:7:1: Attached to scbus7 [...] Root mount waiting for: usbus0 CAM [...] ugen0.4: <Corsair Components, Inc. Gaming USB2.0 Smart Port> at usbus0 [...] uhub4 on uhub1 [...] uhub4: <Corsair Components, Inc. Gaming USB2.0 Smart Port, class 9/0, rev 2.00/32.98, addr 3> on usbus0 [...] uhub4: MTT enabled [...] uhub4: 2 ports with 1 removable, self powered [...] ugen0.5: <Corsair Components, Inc. Corsair Gaming MM800 RGB POLARIS> at usbus0 [...] ukbd0 on uhub4 [...] ukbd0: <Corsair Components, Inc. Corsair Gaming MM800 RGB POLARIS, class 0/0, rev 2.00/1.02, addr 4> on usbus0 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus0 CAM [...] ugen0.6: <Corsair Corsair Gaming GLAIVE RGB Mouse> at usbus0 [...] ugen0.7: <Corsair Corsair Gaming K95 RGB PLATINUM Keyboard> at usbus0 [...] ukbd1 on uhub1 [...] ukbd1: <Corsair Corsair Gaming K95 RGB PLATINUM Keyboard, class 0/0, rev 2.00/3.29, addr 6> on usbus0 [...] kbd3 at ukbd1 [...] Root mount waiting for: usbus0 CAM [...] ugen0.8: <NZXT.-Inc. NZXT USB Device> at usbus0 [...] ugen0.9: <Silicon Labs Corsair Link TM USB Dongle> at usbus0 [...] ugen0.10: <Generic 4-Port USB 3.0 Hub> at usbus0 [...] uhub5 on uhub1 [...] uhub5: <Generic 4-Port USB 3.0 Hub, class 9/0, rev 3.00/1.23, addr 9> on usbus0 [...] Root mount waiting for: usbus0 CAM [...] uhub5: 4 ports with 4 removable, self powered [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] nda0 at nvme0 bus 0 scbus5 target 0 lun 1 [...] nda0: <Samsung SSD 960 PRO 512GB 4B6QCXP7 S3EWNX0J601421H> [...] nda0: Serial Number... [...] nda0: nvme version 1.2 [...] nda0: 488386MB (1000215216 512 byte sectors) [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST6000DM003-2CY186 0001> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 5723166MB (11721045168 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] ada1 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada1: <Samsung SSD 870 EVO 1TB SVT02B6Q> ACS-4 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 953869MB (1953525168 512 byte sectors) [...] ada1: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ada2 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada2: <WDC WD20EZRX-00D8PB0 80.00A80> ACS-2 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 1907729MB (3907029168 512 byte sectors) [...] ada2: quirks=0x1<4K> [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: ada1,pass1 in 'Slot 02', SATA Slot: scbus2 target 0 [...] ses0: ada2,pass2 in 'Slot 03', SATA Slot: scbus3 target 0 [...] da1 at umass-sim1 bus 1 scbus7 target 0 lun 0 [...] da1: <Generic- SD/MMC/MS PRO 1.00> Removable Direct Access SPC-2 SCSI device [...] da1: Serial Number... [...] da1: 40.000MB/s transfers [...] da1: 61056MB (125042688 512 byte sectors) [...] da1: quirks=0x2<NO_6_BYTE> [...] da0 at umass-sim0 bus 0 scbus6 target 0 lun 0 [...] da0: <USB SanDisk 3.2Gen1 1.00> Removable Direct Access SPC-5 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: 117348MB (240328704 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE>