[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE stable/22.7-n250212-a26d6065f1f SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz (3192.82-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16514576384 (15749 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 2 3 1 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <PCI-PCI bridge> mem 0xf7d00000-0xf7d1ffff irq 16 at device 0.0 on pci1 [...] pci2: <PCI bus> on pcib2 [...] pcib3: <PCI-PCI bridge> irq 17 at device 1.0 on pci2 [...] pci3: <PCI bus> on pcib3 [...] igb0: <Intel(R) I350 (Copper)> mem 0xf7c60000-0xf7c7ffff,0xf7c8c000-0xf7c8ffff irq 17 at device 0.0 on pci3 [...] igb0: EEPROM V1.52-0 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xf7c40000-0xf7c5ffff,0xf7c88000-0xf7c8bfff irq 18 at device 0.1 on pci3 [...] igb1: EEPROM V1.52-0 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xf7c20000-0xf7c3ffff,0xf7c84000-0xf7c87fff irq 19 at device 0.2 on pci3 [...] igb2: EEPROM V1.52-0 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xf7c00000-0xf7c1ffff,0xf7c80000-0xf7c83fff irq 16 at device 0.3 on pci3 [...] igb3: EEPROM V1.52-0 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <PCI-PCI bridge> irq 19 at device 3.0 on pci2 [...] pci4: <PCI bus> on pcib4 [...] igb4: <Intel(R) I350 (Copper)> mem 0xf7b20000-0xf7b3ffff,0xf7b44000-0xf7b47fff irq 19 at device 0.0 on pci4 [...] igb4: EEPROM V1.52-0 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 4 RX queues 4 TX queues [...] igb4: Using MSI-X interrupts with 5 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb5: <Intel(R) I350 (Copper)> mem 0xf7b00000-0xf7b1ffff,0xf7b40000-0xf7b43fff irq 16 at device 0.1 on pci4 [...] igb5: EEPROM V1.52-0 [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 4 RX queues 4 TX queues [...] igb5: Using MSI-X interrupts with 5 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 4/1024, RX 4/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7e20000-0xf7e2ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel Panther Point KT Controller> port 0xf0e0-0xf0e7 mem 0xf7e3a000-0xf7e3afff irq 19 at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) 82579LM> port 0xf080-0xf09f mem 0xf7e00000-0xf7e1ffff,0xf7e39000-0xf7e39fff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.13-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7e38000-0xf7e383ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Panther Point HDA Controller> mem 0xf7e30000-0xf7e33fff irq 22 at device 27.0 on pci0 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> mem 0xf7a00000-0xf7a1ffff irq 16 at device 0.0 on pci6 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <PCI-PCI bridge> irq 17 at device 1.0 on pci7 [...] pci8: <PCI bus> on pcib8 [...] igb6: <Intel(R) I350 (Copper)> mem 0xf7960000-0xf797ffff,0xf798c000-0xf798ffff irq 17 at device 0.0 on pci8 [...] igb6: EEPROM V1.52-0 [...] igb6: Using 1024 TX descriptors and 1024 RX descriptors [...] igb6: Using 4 RX queues 4 TX queues [...] igb6: Using MSI-X interrupts with 5 vectors [...] igb6: Ethernet address: ... [...] igb6: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb7: <Intel(R) I350 (Copper)> mem 0xf7940000-0xf795ffff,0xf7988000-0xf798bfff irq 18 at device 0.1 on pci8 [...] igb7: EEPROM V1.52-0 [...] igb7: Using 1024 TX descriptors and 1024 RX descriptors [...] igb7: Using 4 RX queues 4 TX queues [...] igb7: Using MSI-X interrupts with 5 vectors [...] igb7: Ethernet address: ... [...] igb7: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb8: <Intel(R) I350 (Copper)> mem 0xf7920000-0xf793ffff,0xf7984000-0xf7987fff irq 19 at device 0.2 on pci8 [...] igb8: EEPROM V1.52-0 [...] igb8: Using 1024 TX descriptors and 1024 RX descriptors [...] igb8: Using 4 RX queues 4 TX queues [...] igb8: Using MSI-X interrupts with 5 vectors [...] igb8: Ethernet address: ... [...] igb8: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb9: <Intel(R) I350 (Copper)> mem 0xf7900000-0xf791ffff,0xf7980000-0xf7983fff irq 16 at device 0.3 on pci8 [...] igb9: EEPROM V1.52-0 [...] igb9: Using 1024 TX descriptors and 1024 RX descriptors [...] igb9: Using 4 RX queues 4 TX queues [...] igb9: Using MSI-X interrupts with 5 vectors [...] igb9: Ethernet address: ... [...] igb9: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib9: <PCI-PCI bridge> irq 19 at device 3.0 on pci7 [...] pci9: <PCI bus> on pcib9 [...] igb10: <Intel(R) I350 (Copper)> mem 0xf7820000-0xf783ffff,0xf7844000-0xf7847fff irq 19 at device 0.0 on pci9 [...] igb10: EEPROM V1.52-0 [...] igb10: Using 1024 TX descriptors and 1024 RX descriptors [...] igb10: Using 4 RX queues 4 TX queues [...] igb10: Using MSI-X interrupts with 5 vectors [...] igb10: Ethernet address: ... [...] igb10: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb11: <Intel(R) I350 (Copper)> mem 0xf7800000-0xf781ffff,0xf7840000-0xf7843fff irq 16 at device 0.1 on pci9 [...] igb11: EEPROM V1.52-0 [...] igb11: Using 1024 TX descriptors and 1024 RX descriptors [...] igb11: Using 4 RX queues 4 TX queues [...] igb11: Using MSI-X interrupts with 5 vectors [...] igb11: Ethernet address: ... [...] igb11: netmap queues/slots: TX 4/1024, RX 4/1024 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7e37000-0xf7e373ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] pcib10: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Panther Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7e36000-0xf7e367ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xce800-0xcf7ff,0xcf800-0xd07ff,0xd0800-0xd17ff,0xd1800-0xd27ff,0xd2800-0xd37ff,0xd3800-0xd47ff,0xd4800-0xd57ff,0xd5800-0xd67ff,0xd6800-0xd77ff,0xd7800-0xd87ff,0xd8800-0xd97ff,0xd9800-0xda7ff,0xda800-0xdb7ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 214e00002000 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 214e00002000 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 214e00002000 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 214e00002000 [...] device_attach: est3 attach returned 6 [...] Timecounter "TSC-low" frequency 1596373522 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC269 (Analog)> at nid 20 and 24 on hdaa0 [...] pcm1: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 27,33 and 25 on hdaa0 [...] hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0 [...] hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Panther Point (HDMI/DP 8ch)> at nid 5 on hdaa1 [...] pcm3: <Intel Panther Point (HDMI/DP 8ch)> at nid 6 on hdaa1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus2 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub2 on usbus0 [...] uhub2: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SATA SSD SBFM61.3> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] uhub2: 8 ports with 8 removable, self powered [...] uhub1: 3 ports with 3 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] Root mount waiting for: usbus1 usbus2 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] Root mount waiting for: usbus1 usbus2 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] ugen2.3: <vendor 0x05e3 USB2.0 Hub> at usbus2 [...] uhub5 on uhub4 [...] uhub5: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.36, addr 3> on usbus2 [...] Root mount waiting for: usbus2 [...] uhub5: 4 ports with 4 removable, self powered [...] ugen2.4: <Matias Keyboard Matias RGB Backlit Wired Keyboard> at usbus2 [...] ukbd0 on uhub5 [...] ukbd0: <Matias Keyboard Matias RGB Backlit Wired Keyboard, class 0/0, rev 2.00/1.91, addr 4> on usbus2 [...] kbd2 at ukbd0