[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE-p4 stable/25.7-n271708-85edba454cf9 SMP amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i5-8260U CPU @ 1.60GHz (1800.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x806ea Family=0x6 Model=0x8e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0x9c002400<MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34358689792 (32767 MB) [...] avail memory = 33225748480 (31686 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 3 1 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf0600-0xf0617 [...] smbios0: Entry point: v3 (64-bit), Version: 3.2 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa1d00000-0xa1d0ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] xhci_interrupt: host controller halted [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0xa1d14000-0xa1d15fff,0xa1d1a000-0xa1d1a0ff,0xa1d19000-0xa1d197ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igc0: <Intel(R) Ethernet Controller I225-V> mem 0xa1b00000-0xa1bfffff,0xa1c00000-0xa1c03fff irq 16 at device 0.0 on pci1 [...] igc0: EEPROM V1.68-0 eTrack 0x800001ce [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igc1: <Intel(R) Ethernet Controller I225-V> mem 0xa1900000-0xa19fffff,0xa1a00000-0xa1a03fff irq 17 at device 0.0 on pci2 [...] igc1: EEPROM V1.68-0 eTrack 0x800001ce [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igc2: <Intel(R) Ethernet Controller I225-V> mem 0xa1700000-0xa17fffff,0xa1800000-0xa1803fff irq 18 at device 0.0 on pci3 [...] igc2: EEPROM V1.68-0 eTrack 0x800001ce [...] igc2: Using 1024 TX descriptors and 1024 RX descriptors [...] igc2: Using 4 RX queues 4 TX queues [...] igc2: Using MSI-X interrupts with 5 vectors [...] igc2: Ethernet address: ... [...] igc2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igc3: <Intel(R) Ethernet Controller I225-V> mem 0xa1500000-0xa15fffff,0xa1600000-0xa1603fff irq 19 at device 0.0 on pci4 [...] igc3: EEPROM V1.68-0 eTrack 0x800001ce [...] igc3: Using 1024 TX descriptors and 1024 RX descriptors [...] igc3: Using 4 RX queues 4 TX queues [...] igc3: Using MSI-X interrupts with 5 vectors [...] igc3: Ethernet address: ... [...] igc3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igc4: <Intel(R) Ethernet Controller I225-V> mem 0xa1300000-0xa13fffff,0xa1400000-0xa1403fff irq 16 at device 0.0 on pci5 [...] igc4: EEPROM V1.68-0 eTrack 0x800001ce [...] igc4: Using 1024 TX descriptors and 1024 RX descriptors [...] igc4: Using 4 RX queues 4 TX queues [...] igc4: Using MSI-X interrupts with 5 vectors [...] igc4: Ethernet address: ... [...] igc4: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 17 at device 29.1 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igc5: <Intel(R) Ethernet Controller I225-V> mem 0xa1100000-0xa11fffff,0xa1200000-0xa1203fff irq 17 at device 0.0 on pci6 [...] igc5: EEPROM V1.68-0 eTrack 0x800001ce [...] igc5: Using 1024 TX descriptors and 1024 RX descriptors [...] igc5: Using 4 RX queues 4 TX queues [...] igc5: Using MSI-X interrupts with 5 vectors [...] igc5: Ethernet address: ... [...] igc5: netmap queues/slots: TX 4/1024, RX 4/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Cannon Lake HDA Controller> mem 0xa1d10000-0xa1d13fff,0xa1000000-0xa10fffff irq 16 at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] cpufreq0: <CPU frequency control> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] cpufreq1: <CPU frequency control> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] cpufreq2: <CPU frequency control> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] cpufreq3: <CPU frequency control> on cpu3 [...] Timecounter "TSC" frequency 1800000720 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa0: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] Trying to mount root from ufs:/dev/ufs/OPNsense_Install [ro,noatime]... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: 18 ports with 18 removable, self powered [...] Root mount waiting for: usbus0 CAM [...] ugen0.2: <vendor 0x046a product 0x0023> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <vendor 0x046a product 0x0023, class 0/0, rev 2.00/0.32, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.3: <USB SanDisk 3.2Gen1> at usbus0 [...] umass0 on uhub0 [...] umass0: <USB SanDisk 3.2Gen1, class 0/0, rev 3.20/1.00, addr 2> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4001 [...] umass0:2:0: Attached to scbus2 [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] ugen0.2: <vendor 0x046a product 0x0023> at usbus0 (disconnected) [...] ukbd0: at uhub0, port 1, addr 1 (disconnected) [...] ukbd0: detached [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <IM256-P130 SBFQJ1.3> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <USB SanDisk 3.2Gen1 1.00> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: 117360MB (240353280 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] GEOM: da0: the secondary GPT header is not in the last LBA. [...] pchtherm0: <CannonLake-LP Thermal Subsystem> mem 0xa1d1d000-0xa1d1dfff irq 16 at device 18.0 on pci0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: cannot find EC device [...] acpi_wmi2: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] ugen0.2: <Dell Dell USB Keyboard Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <Dell Dell USB Keyboard Hub, class 9/0, rev 1.10/2.00, addr 3> on usbus0 [...] uhub1: 3 ports with 2 removable, bus powered [...] ugen0.4: <Dell Dell USB Keyboard> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/2.00, addr 4> on usbus0 [...] kbd2 at ukbd0 [...] uhid0 on uhub1 [...] uhid0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/2.00, addr 4> on usbus0 [...] lo0: link state changed to UP [...] [39] pflog0: permanently promiscuous mode enabled [...] [120] ZFS filesystem version: 5 [...] [120] ZFS storage pool version: features support (5000) [...] [1814] ugen0.3: <USB SanDisk 3.2Gen1> at usbus0 (disconnected) [...] [1814] umass0: at uhub0, port 14, addr 2 (disconnected) [...] [1814] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <USB SanDisk 3.2Gen1 1.00> s/n ... detached [...] [1814] (da0:umass-sim0:0:0:0): Periph destroyed [...] [1814] umass0: detached [...] [1821] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] [1821] Waiting (max 60 seconds) for system process `syncer' to stop... [...] [1821] Syncing disks, vnodes remaining... 0 0 0 0 0 0 done [...] [1826] All buffers synced. [...] [1826] Uptime: 30m26s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE-p4 stable/25.7-n271708-85edba454cf9 SMP amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] [1] VT(efifb): resolution 800x600 [...] [1] CPU: Intel(R) Core(TM) i5-8260U CPU @ 1.60GHz (1800.00-MHz K8-class CPU) [...] [1] Origin="GenuineIntel" Id=0x806ea Family=0x6 Model=0x8e Stepping=10 [...] [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] [1] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] [1] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] [1] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] [1] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] [1] Structured Extended Features3=0x9c002400<MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> [...] [1] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] [1] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] [1] TSC: P-state invariant, performance statistics [...] [1] real memory = 34358689792 (32767 MB) [...] [1] avail memory = 33219198976 (31680 MB) [...] [1] Event timer "LAPIC" quality 600 [...] [1] ACPI APIC Table: <ALASKA A M I > [...] [1] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] [1] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] [1] random: registering fast source Intel Secure Key RNG [...] [1] random: fast provider: "Intel Secure Key RNG" [...] [1] random: unblocking device. [...] [1] ioapic0 <Version 2.0> irqs 0-119 [...] [1] Launching APs: 2 3 1 [...] [1] random: entropy device external interface [...] [1] wlan: mac acl policy registered [...] [1] kbd1 at kbdmux0 [...] [1] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] [1] efirtc0: <EFI Realtime Clock> [...] [1] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] smbios0: <System Management BIOS> at iomem 0x8c9c8000-0x8c9c8017 [...] [1] smbios0: Entry point: v3 (64-bit), Version: 3.2 [...] [1] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] [1] acpi0: <ALASKA A M I > [...] [1] acpi0: Power Button (fixed) [...] [1] cpu0: <ACPI CPU> on acpi0 [...] [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] [1] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] [1] Event timer "HPET" frequency 24000000 Hz quality 550 [...] [1] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] [1] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] [1] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] [1] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] [1] atrtc1: <AT realtime clock> on acpi0 [...] [1] atrtc1: Warning: Couldn't map I/O. [...] [1] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] [1] Event timer "RTC" frequency 32768 Hz quality 0 [...] [1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] [1] Event timer "i8254" frequency 1193182 Hz quality 100 [...] [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] [1] pci0: <ACPI PCI bus> on pcib0 [...] [1] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff irq 16 at device 2.0 on pci0 [...] [1] vgapci0: Boot video device [...] [1] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa1d00000-0xa1d0ffff irq 16 at device 20.0 on pci0 [...] [1] xhci0: 32 bytes context size, 64-bit DMA [...] [1] usbus0: waiting for BIOS to give up control [...] [1] xhci_interrupt: host controller halted [...] [1] usbus0 on xhci0 [...] [1] usbus0: 5.0Gbps Super Speed USB v3.0 [...] [1] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] [1] pci0: <simple comms> at device 22.0 (no driver attached) [...] [1] ahci0: <AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0xa1d14000-0xa1d15fff,0xa1d1a000-0xa1d1a0ff,0xa1d19000-0xa1d197ff irq 16 at device 23.0 on pci0 [...] [1] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported [...] [1] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] [1] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] [1] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] [1] pci1: <ACPI PCI bus> on pcib1 [...] [1] igc0: <Intel(R) Ethernet Controller I225-V> mem 0xa1b00000-0xa1bfffff,0xa1c00000-0xa1c03fff irq 16 at device 0.0 on pci1 [...] [1] igc0: EEPROM V1.68-0 eTrack 0x800001ce [...] [1] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc0: Using 4 RX queues 4 TX queues [...] [1] igc0: Using MSI-X interrupts with 5 vectors [...] [1] igc0: Ethernet address: ... [...] [1] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] [1] pci2: <ACPI PCI bus> on pcib2 [...] [1] igc1: <Intel(R) Ethernet Controller I225-V> mem 0xa1900000-0xa19fffff,0xa1a00000-0xa1a03fff irq 17 at device 0.0 on pci2 [...] [1] igc1: EEPROM V1.68-0 eTrack 0x800001ce [...] [1] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc1: Using 4 RX queues 4 TX queues [...] [1] igc1: Using MSI-X interrupts with 5 vectors [...] [1] igc1: Ethernet address: ... [...] [1] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] [1] pci3: <ACPI PCI bus> on pcib3 [...] [1] igc2: <Intel(R) Ethernet Controller I225-V> mem 0xa1700000-0xa17fffff,0xa1800000-0xa1803fff irq 18 at device 0.0 on pci3 [...] [1] igc2: EEPROM V1.68-0 eTrack 0x800001ce [...] [1] igc2: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc2: Using 4 RX queues 4 TX queues [...] [1] igc2: Using MSI-X interrupts with 5 vectors [...] [1] igc2: Ethernet address: ... [...] [1] igc2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] [1] pci4: <ACPI PCI bus> on pcib4 [...] [1] igc3: <Intel(R) Ethernet Controller I225-V> mem 0xa1500000-0xa15fffff,0xa1600000-0xa1603fff irq 19 at device 0.0 on pci4 [...] [1] igc3: EEPROM V1.68-0 eTrack 0x800001ce [...] [1] igc3: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc3: Using 4 RX queues 4 TX queues [...] [1] igc3: Using MSI-X interrupts with 5 vectors [...] [1] igc3: Ethernet address: ... [...] [1] igc3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 [...] [1] pci5: <ACPI PCI bus> on pcib5 [...] [1] igc4: <Intel(R) Ethernet Controller I225-V> mem 0xa1300000-0xa13fffff,0xa1400000-0xa1403fff irq 16 at device 0.0 on pci5 [...] [1] igc4: EEPROM V1.68-0 eTrack 0x800001ce [...] [1] igc4: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc4: Using 4 RX queues 4 TX queues [...] [1] igc4: Using MSI-X interrupts with 5 vectors [...] [1] igc4: Ethernet address: ... [...] [1] igc4: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib6: <ACPI PCI-PCI bridge> irq 17 at device 29.1 on pci0 [...] [1] pci6: <ACPI PCI bus> on pcib6 [...] [1] igc5: <Intel(R) Ethernet Controller I225-V> mem 0xa1100000-0xa11fffff,0xa1200000-0xa1203fff irq 17 at device 0.0 on pci6 [...] [1] igc5: EEPROM V1.68-0 eTrack 0x800001ce [...] [1] igc5: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc5: Using 4 RX queues 4 TX queues [...] [1] igc5: Using MSI-X interrupts with 5 vectors [...] [1] igc5: Ethernet address: ... [...] [1] igc5: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] [1] isa0: <ISA bus> on isab0 [...] [1] hdac0: <Intel Cannon Lake HDA Controller> mem 0xa1d10000-0xa1d13fff,0xa1000000-0xa10fffff irq 16 at device 31.3 on pci0 [...] [1] pci0: <serial bus> at device 31.5 (no driver attached) [...] [1] acpi_button0: <Sleep Button> on acpi0 [...] [1] acpi_button1: <Power Button> on acpi0 [...] [1] acpi_tz0: <Thermal Zone> on acpi0 [...] [1] ns8250: UART FCR is broken [...] [1] ns8250: UART FCR is broken [...] [1] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] [1] ns8250: UART FCR is broken [...] [1] ns8250: UART FCR is broken [...] [1] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] [1] acpi_syscontainer0: <System Container> on acpi0 [...] [1] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] [1] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] [1] atrtc0: Warning: Couldn't map I/O. [...] [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] atrtc0: Can't map interrupt. [...] [1] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] [1] cpufreq0: <CPU frequency control> on cpu0 [...] [1] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] [1] cpufreq1: <CPU frequency control> on cpu1 [...] [1] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] [1] cpufreq2: <CPU frequency control> on cpu2 [...] [1] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] [1] cpufreq3: <CPU frequency control> on cpu3 [...] [1] Timecounter "TSC" frequency 1800000499 Hz quality 1000 [...] [1] Timecounters tick every 1.000 msec [...] [1] ZFS filesystem version: 5 [...] [1] ZFS storage pool version: features support (5000) [...] [1] hdacc0: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] [1] hdaa0: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc0 [...] [1] pcm0: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] [2] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <IM256-P130 SBFQJ1.3> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] [2] Trying to mount root from zfs:zroot/ROOT/default []... [...] [2] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] [2] uhub0 on usbus0 [...] [2] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] [3] uhub0: 18 ports with 18 removable, self powered [...] [3] Root mount waiting for: usbus0 [...] [3] ugen0.2: <Dell Dell USB Keyboard Hub> at usbus0 [...] [3] uhub1 on uhub0 [...] [3] uhub1: <Dell Dell USB Keyboard Hub, class 9/0, rev 1.10/2.00, addr 1> on usbus0 [...] [3] uhub1: 3 ports with 2 removable, bus powered [...] [4] Root mount waiting for: usbus0 [...] [4] ugen0.3: <Dell Dell USB Keyboard> at usbus0 [...] [4] ukbd0 on uhub1 [...] [4] ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/2.00, addr 2> on usbus0 [...] [4] kbd2 at ukbd0 [...] [8] pchtherm0: <CannonLake-LP Thermal Subsystem> mem 0xa1d1d000-0xa1d1dfff irq 16 at device 18.0 on pci0 [...] [8] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] [8] acpi_wmi0: cannot find EC device [...] [8] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] [8] acpi_wmi1: cannot find EC device [...] [8] acpi_wmi1: Embedded MOF found [...] [8] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] [8] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] [8] acpi_wmi2: cannot find EC device [...] [8] acpi_wmi2: Embedded MOF found [...] [8] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] [8] uhid0 on uhub1 [...] [8] uhid0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/2.00, addr 2> on usbus0 [...] [10] lo0: link state changed to UP [...] [11] pflog0: permanently promiscuous mode enabled [...] [301] igc1: link state changed to UP [...] [659] igc0: link state changed to UP [...] [1147] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] [1147] Waiting (max 60 seconds) for system process `syncer' to stop... [...] [1148] Syncing disks, vnodes remaining... 0 0 0 0 done [...] [1151] All buffers synced. [...] [1151] Uptime: 19m11s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE-p4 stable/25.7-n271708-85edba454cf9 SMP amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] [1] VT(efifb): resolution 800x600 [...] [1] CPU: Intel(R) Core(TM) i5-8260U CPU @ 1.60GHz (1800.00-MHz K8-class CPU) [...] [1] Origin="GenuineIntel" Id=0x806ea Family=0x6 Model=0x8e Stepping=10 [...] [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] [1] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] [1] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] [1] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] [1] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] [1] Structured Extended Features3=0x9c002400<MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> [...] [1] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] [1] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] [1] TSC: P-state invariant, performance statistics [...] [1] real memory = 34358689792 (32767 MB) [...] [1] avail memory = 33219203072 (31680 MB) [...] [1] Event timer "LAPIC" quality 600 [...] [1] ACPI APIC Table: <ALASKA A M I > [...] [1] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] [1] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] [1] random: registering fast source Intel Secure Key RNG [...] [1] random: fast provider: "Intel Secure Key RNG" [...] [1] random: unblocking device. [...] [1] ioapic0 <Version 2.0> irqs 0-119 [...] [1] Launching APs: 2 3 1 [...] [1] random: entropy device external interface [...] [1] wlan: mac acl policy registered [...] [1] kbd1 at kbdmux0 [...] [1] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] [1] efirtc0: <EFI Realtime Clock> [...] [1] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] smbios0: <System Management BIOS> at iomem 0x8c9c8000-0x8c9c8017 [...] [1] smbios0: Entry point: v3 (64-bit), Version: 3.2 [...] [1] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] [1] acpi0: <ALASKA A M I > [...] [1] acpi0: Power Button (fixed) [...] [1] cpu0: <ACPI CPU> on acpi0 [...] [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] [1] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] [1] Event timer "HPET" frequency 24000000 Hz quality 550 [...] [1] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] [1] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] [1] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] [1] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] [1] atrtc1: <AT realtime clock> on acpi0 [...] [1] atrtc1: Warning: Couldn't map I/O. [...] [1] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] [1] Event timer "RTC" frequency 32768 Hz quality 0 [...] [1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] [1] Event timer "i8254" frequency 1193182 Hz quality 100 [...] [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] [1] pci0: <ACPI PCI bus> on pcib0 [...] [1] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff irq 16 at device 2.0 on pci0 [...] [1] vgapci0: Boot video device [...] [1] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa1d00000-0xa1d0ffff irq 16 at device 20.0 on pci0 [...] [1] xhci0: 32 bytes context size, 64-bit DMA [...] [1] usbus0: waiting for BIOS to give up control [...] [1] xhci_interrupt: host controller halted [...] [1] usbus0 on xhci0 [...] [1] usbus0: 5.0Gbps Super Speed USB v3.0 [...] [1] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] [1] pci0: <simple comms> at device 22.0 (no driver attached) [...] [1] ahci0: <AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0xa1d14000-0xa1d15fff,0xa1d1a000-0xa1d1a0ff,0xa1d19000-0xa1d197ff irq 16 at device 23.0 on pci0 [...] [1] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported [...] [1] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] [1] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] [1] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] [1] pci1: <ACPI PCI bus> on pcib1 [...] [1] igc0: <Intel(R) Ethernet Controller I225-V> mem 0xa1b00000-0xa1bfffff,0xa1c00000-0xa1c03fff irq 16 at device 0.0 on pci1 [...] [1] igc0: EEPROM V1.68-0 eTrack 0x800001ce [...] [1] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc0: Using 4 RX queues 4 TX queues [...] [1] igc0: Using MSI-X interrupts with 5 vectors [...] [1] igc0: Ethernet address: ... [...] [1] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] [1] pci2: <ACPI PCI bus> on pcib2 [...] [1] igc1: <Intel(R) Ethernet Controller I225-V> mem 0xa1900000-0xa19fffff,0xa1a00000-0xa1a03fff irq 17 at device 0.0 on pci2 [...] [1] igc1: EEPROM V1.68-0 eTrack 0x800001ce [...] [1] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc1: Using 4 RX queues 4 TX queues [...] [1] igc1: Using MSI-X interrupts with 5 vectors [...] [1] igc1: Ethernet address: ... [...] [1] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] [1] pci3: <ACPI PCI bus> on pcib3 [...] [1] igc2: <Intel(R) Ethernet Controller I225-V> mem 0xa1700000-0xa17fffff,0xa1800000-0xa1803fff irq 18 at device 0.0 on pci3 [...] [1] igc2: EEPROM V1.68-0 eTrack 0x800001ce [...] [1] igc2: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc2: Using 4 RX queues 4 TX queues [...] [1] igc2: Using MSI-X interrupts with 5 vectors [...] [1] igc2: Ethernet address: ... [...] [1] igc2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] [1] pci4: <ACPI PCI bus> on pcib4 [...] [1] igc3: <Intel(R) Ethernet Controller I225-V> mem 0xa1500000-0xa15fffff,0xa1600000-0xa1603fff irq 19 at device 0.0 on pci4 [...] [1] igc3: EEPROM V1.68-0 eTrack 0x800001ce [...] [1] igc3: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc3: Using 4 RX queues 4 TX queues [...] [1] igc3: Using MSI-X interrupts with 5 vectors [...] [1] igc3: Ethernet address: ... [...] [1] igc3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 [...] [1] pci5: <ACPI PCI bus> on pcib5 [...] [1] igc4: <Intel(R) Ethernet Controller I225-V> mem 0xa1300000-0xa13fffff,0xa1400000-0xa1403fff irq 16 at device 0.0 on pci5 [...] [1] igc4: EEPROM V1.68-0 eTrack 0x800001ce [...] [1] igc4: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc4: Using 4 RX queues 4 TX queues [...] [1] igc4: Using MSI-X interrupts with 5 vectors [...] [1] igc4: Ethernet address: ... [...] [1] igc4: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib6: <ACPI PCI-PCI bridge> irq 17 at device 29.1 on pci0 [...] [1] pci6: <ACPI PCI bus> on pcib6 [...] [1] igc5: <Intel(R) Ethernet Controller I225-V> mem 0xa1100000-0xa11fffff,0xa1200000-0xa1203fff irq 17 at device 0.0 on pci6 [...] [1] igc5: EEPROM V1.68-0 eTrack 0x800001ce [...] [1] igc5: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc5: Using 4 RX queues 4 TX queues [...] [1] igc5: Using MSI-X interrupts with 5 vectors [...] [1] igc5: Ethernet address: ... [...] [1] igc5: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] [1] isa0: <ISA bus> on isab0 [...] [1] hdac0: <Intel Cannon Lake HDA Controller> mem 0xa1d10000-0xa1d13fff,0xa1000000-0xa10fffff irq 16 at device 31.3 on pci0 [...] [1] pci0: <serial bus> at device 31.5 (no driver attached) [...] [1] acpi_button0: <Sleep Button> on acpi0 [...] [1] acpi_button1: <Power Button> on acpi0 [...] [1] acpi_tz0: <Thermal Zone> on acpi0 [...] [1] ns8250: UART FCR is broken [...] [1] ns8250: UART FCR is broken [...] [1] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] [1] ns8250: UART FCR is broken [...] [1] ns8250: UART FCR is broken [...] [1] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] [1] acpi_syscontainer0: <System Container> on acpi0 [...] [1] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] [1] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] [1] atrtc0: Warning: Couldn't map I/O. [...] [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] atrtc0: Can't map interrupt. [...] [1] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] [1] cpufreq0: <CPU frequency control> on cpu0 [...] [1] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] [1] cpufreq1: <CPU frequency control> on cpu1 [...] [1] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] [1] cpufreq2: <CPU frequency control> on cpu2 [...] [1] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] [1] cpufreq3: <CPU frequency control> on cpu3 [...] [1] Timecounter "TSC" frequency 1800001264 Hz quality 1000 [...] [1] Timecounters tick every 1.000 msec [...] [1] ZFS filesystem version: 5 [...] [1] ZFS storage pool version: features support (5000) [...] [1] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] [1] hdacc0: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] [1] hdaa0: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc0 [...] [1] pcm0: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] [2] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <IM256-P130 SBFQJ1.3> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] [2] Trying to mount root from zfs:zroot/ROOT/default []... [...] [2] uhub0 on usbus0 [...] [2] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] [3] uhub0: 18 ports with 18 removable, self powered [...] [3] Root mount waiting for: usbus0 [...] [3] ugen0.2: <Dell Dell USB Keyboard Hub> at usbus0 [...] [3] uhub1 on uhub0 [...] [3] uhub1: <Dell Dell USB Keyboard Hub, class 9/0, rev 1.10/2.00, addr 1> on usbus0 [...] [3] uhub1: 3 ports with 2 removable, bus powered [...] [4] Root mount waiting for: usbus0 [...] [4] ugen0.3: <Dell Dell USB Keyboard> at usbus0 [...] [4] ukbd0 on uhub1 [...] [4] ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/2.00, addr 2> on usbus0 [...] [4] kbd2 at ukbd0