[...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-CURRENT #0 main-c255641-gf2b794e1e90: Thu Jan 7 06:25:26 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-rc2-0-g43ff75f2c3f) [...] WARNING: WITNESS option enabled, expect reduced performance. [...] VT(vga): resolution 640x480 [...] Solaris: WARNING: ignoring tunable zfs_arc_max (using 0 instead) [...] CPU: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz (2394.05-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x20655 Family=0x6 Model=0x25 Stepping=5 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x29ae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AESNI> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3862519808 (3683 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <LENOVO TP-6I > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20201113/tbfadt-748) [...] Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20201113/tbfadt-850) [...] ioapic0: MADT APIC ID 1 != hw id 2 [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 3 2 [...] Timecounter "TSC-low" frequency 1197026360 Hz quality 1000 [...] random: entropy device external interface [...] md0: Preloaded image </data/XXXXXXXXXXXX 16285696 bytes at 0xffffffff8214a8b0 [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0. [...] kbd1 at kbdmux0 [...] 000.000119 [4346] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> [...] cryptosoft0: <software crypto> [...] acpi0: <LENOVO TP-6I> [...] acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0 [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Sleep Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf2000000-0xf23fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci1 [...] agp0: <Intel Ironlake (M) SVGA controller> on vgapci0 [...] WARNING: Device "agp" is Giant locked and may be deleted before FreeBSD 13.0. [...] agp0: aperture size is 256M, detected 32764k stolen memory [...] vgapci0: Boot video device [...] pci1: <simple comms> at device 22.0 (no driver attached) [...] uart2: <5 Series/3400 Series Chipset KT Controller> port 0x1808-0x180f mem 0xf2624000-0xf2624fff irq 17 at device 22.3 on pci1 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) PRO/1000 Network Connection> port 0x1820-0x183f mem 0xf2600000-0xf261ffff,0xf2625000-0xf2625fff irq 20 at device 25.0 on pci1 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xf2828000-0xf28283ff irq 23 at device 26.0 on pci1 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Ibex Peak HDA Controller> mem 0xf2620000-0xf2623fff irq 17 at device 27.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci1 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci1 [...] pci3: <ACPI PCI bus> on pcib3 [...] iwn0: <Intel Centrino Advanced-N 6200> mem 0xf2400000-0xf2401fff irq 17 at device 0.0 on pci3 [...] pcib4: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci1 [...] pcib5: <ACPI PCI-PCI bridge> irq 20 at device 28.4 on pci1 [...] pci4: <ACPI PCI bus> on pcib5 [...] sdhci_pci0: <RICOH R5CE822 SD> mem 0xf2500000-0xf25000ff irq 16 at device 0.0 on pci4 [...] sdhci_pci0: 1 slot(s) allocated [...] fwohci0: <1394 Open Host Controller Interface> mem 0xf2500800-0xf2500fff irq 19 at device 0.3 on pci4 [...] fwohci0: OHCI version 1.10 (ROM=0) [...] fwohci0: No. of Isochronous channels is 4. [...] fwohci0: EUI64 XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX [...] fwohci0: Phy 1394a available S400, 1 ports. [...] fwohci0: Link S400, max_rec 2048 bytes. [...] firewire0: <IEEE1394(FireWire) bus> on fwohci0 [...] fwohci0: Initiate bus reset [...] fwohci0: fwohci_intr_core: BUS reset [...] fwohci0: PhysicalUpperBound register is not implemented. Physical memory access is limited to the first 4GB [...] fwohci0: PhysicalUpperBound = 0x00000000 [...] fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode [...] firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) [...] firewire0: bus manager 0 [...] ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xf2828400-0xf28287ff irq 19 at device 29.0 on pci1 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci1 [...] pci5: <ACPI PCI bus> on pcib6 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci1 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Ibex Peak-M AHCI SATA controller> port 0x1860-0x1867,0x1814-0x1817,0x1818-0x181f,0x1810-0x1813,0x1840-0x185f mem 0xf2827000-0xf28277ff irq 16 at device 31.2 on pci1 [...] ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 13.0. [...] psm0: model Synaptics Touchpad, device ID 0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xdd000-0xdffff,0xe0000-0xeffff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] Solaris: WARNING: ignoring tunable zfs_arc_max (using 2949218304 instead) [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] hdacc0: <Conexant CX20585 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Conexant CX20585 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Conexant CX20585 (Right Analog)> at nid 25 and 27 on hdaa0 [...] pcm1: <Conexant CX20585 (Internal Analog)> at nid 31 and 35 on hdaa0 [...] unknown: <Conexant CX20585 HDA CODEC Modem Function Group> at nid 2 on hdacc0 (no driver attached) [...] hdacc1: <Intel Ibex Peak HDA CODEC> at cad 3 on hdac0 [...] hdaa1: <Intel Ibex Peak Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Ibex Peak (HDMI/DP 8ch)> at nid 4 on hdaa1 [...] pcm3: <Intel Ibex Peak (HDMI/DP 8ch)> at nid 5 on hdaa1 [...] WARNING: WITNESS option enabled, expect reduced performance. [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] Trying to mount root from ufs:/dev/md0 []... [...] Root mount waiting for: usbus0 usbus1 CAM [...] uhub1 on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <OCZ-VERTEX3 2.15> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: pass1,cd0 in 'Slot 01', SATA Slot: scbus1 target 0 [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <Optiarc DVD RW AD-7930H 1.D1> Removable CD-ROM SCSI device [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] Root mount waiting for: usbus0 usbus1 [...] uhub1: 3 ports with 3 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] ugen0.2: <vendor 0x8087 product 0x0020> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x0020> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] uhub2: 6 ports with 6 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] uhub3: 8 ports with 8 removable, self powered [...] ugen0.3: <UPEK Biometric Coprocessor> at usbus0 [...] Root mount waiting for: usbus0 usbus1 [...] ugen0.4: <Broadcom Corp Broadcom Bluetooth Device> at usbus0 [...] ugen1.3: <SanDisk Cruzer Snap> at usbus1 [...] umass0 on uhub3 [...] umass0: <SanDisk Cruzer Snap, class 0/0, rev 2.00/1.00, addr 3> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:5:0: Attached to scbus5 [...] da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 [...] da0: <SanDisk Cruzer Snap 1.00> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 29340MB (60088320 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] GEOM: da0: the secondary GPT header is not in the last LBA. [...] GEOM: iso9660/LIVE: the secondary GPT header is not in the last LBA. [...] random: unblocking device. [...] lock order reversal: [...] 1st 0xfffffe00a7a27580 bufwait (bufwait, lockmgr) @ /usr/src/sys/vm/vm_pager.c:392 [...] 2nd 0xfffff800088b89f8 isofs (isofs, lockmgr) @ /usr/src/sys/dev/md/md.c:986 [...] lock order isofs -> bufwait established at: [...] #0 0xffffffff80c66a5d at witness_checkorder+0x46d [...] #1 0xffffffff80bc828c at lockmgr_xlock_hard+0x6c [...] #2 0xffffffff80bc8fa3 at __lockmgr_args+0x613 [...] #3 0xffffffff80cb5564 at getnewbuf+0x334 [...] #4 0xffffffff80cb290e at getblkx+0x34e [...] #5 0xffffffff80cb23b4 at breadn_flags+0x44 [...] #6 0xffffffff80b75c8c at cd9660_blkatoff+0x5c [...] #7 0xffffffff80b780e6 at cd9660_vget_internal+0x266 [...] #8 0xffffffff80cd23b2 at vfs_domount+0xa32 [...] #9 0xffffffff80cd0fb2 at vfs_donmount+0x872 [...] #10 0xffffffff80cd0709 at sys_nmount+0x69 [...] #11 0xffffffff8104bfde at amd64_syscall+0x12e [...] #12 0xffffffff8101f60e at fast_syscall_common+0xf8 [...] lock order bufwait -> isofs attempted at: [...] #0 0xffffffff80c673bc at witness_checkorder+0xdcc [...] #1 0xffffffff80bc7ba8 at lockmgr_lock_flags+0x188 [...] #2 0xffffffff80cf3484 at _vn_lock+0x54 [...] #3 0xffffffff806f9cc9 at mdstart_vnode+0x439 [...] #4 0xffffffff806f7921 at md_kthread+0x1d1 [...] #5 0xffffffff80bb2750 at fork_exit+0x80 [...] #6 0xffffffff8101fd6e at fork_trampoline+0xe [...] lock order reversal: [...] 1st 0xfffff8004649ddc8 zfs (zfs, lockmgr) @ /usr/src/sys/kern/vfs_mount.c:1033 [...] 2nd 0xfffff800495dabe0 devfs (devfs, lockmgr) @ /usr/src/sys/kern/vfs_mount.c:1045 [...] lock order zfs -> devfs attempted at: [...] #0 0xffffffff80c673bc at witness_checkorder+0xdcc [...] #1 0xffffffff80bc95f5 at lockmgr_xlock+0x55 [...] #2 0xffffffff80cf3484 at _vn_lock+0x54 [...] #3 0xffffffff80cd2875 at vfs_domount+0xef5 [...] #4 0xffffffff80cd0fb2 at vfs_donmount+0x872 [...] #5 0xffffffff80cd0709 at sys_nmount+0x69 [...] #6 0xffffffff8104bfde at amd64_syscall+0x12e [...] #7 0xffffffff8101f60e at fast_syscall_common+0xf8 [...] lock order reversal: [...] 1st 0xfffff800087bd070 ufs (ufs, lockmgr) @ /usr/src/sys/kern/vfs_mount.c:1742 [...] 2nd 0xfffff800082ee070 devfs (devfs, lockmgr) @ /usr/src/sys/kern/vfs_subr.c:3133 [...] lock order devfs -> ufs established at: [...] #0 0xffffffff80c66a5d at witness_checkorder+0x46d [...] #1 0xffffffff80bc7ba8 at lockmgr_lock_flags+0x188 [...] #2 0xffffffff80ebe375 at ffs_lock+0x75 [...] #3 0xffffffff80cf3484 at _vn_lock+0x54 [...] #4 0xffffffff80cd2875 at vfs_domount+0xef5 [...] #5 0xffffffff80cd0fb2 at vfs_donmount+0x872 [...] #6 0xffffffff80cd53c7 at kernel_mount+0x57 [...] #7 0xffffffff80cd7d91 at parse_mount+0x4a1 [...] #8 0xffffffff80cd61f7 at vfs_mountroot+0x587 [...] #9 0xffffffff80b8624f at start_init+0x1f [...] #10 0xffffffff80bb2750 at fork_exit+0x80 [...] #11 0xffffffff8101fd6e at fork_trampoline+0xe [...] lock order ufs -> devfs attempted at: [...] #0 0xffffffff80c673bc at witness_checkorder+0xdcc [...] #1 0xffffffff80bc7ba8 at lockmgr_lock_flags+0x188 [...] #2 0xffffffff80cf3484 at _vn_lock+0x54 [...] #3 0xffffffff80cdc583 at vput_final+0x113 [...] #4 0xffffffff80b791e1 at cd9660_unmount+0xb1 [...] #5 0xffffffff80cd395c at dounmount+0x42c [...] #6 0xffffffff80cd34bc at kern_unmount+0x2fc [...] #7 0xffffffff8104bfde at amd64_syscall+0x12e [...] #8 0xffffffff8101f60e at fast_syscall_common+0xf8 [...] Trying to mount root from zfs:livecd []... [...] acpi_video0: <ACPI video extension> on vgapci0 [...] lo0: link state changed to UP [...] ichsmb0: <Intel PCH SMBus controller> port 0x1880-0x189f mem 0xf2828800-0xf28288ff irq 23 at device 31.3 on pci1 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMI1.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.PCI0.WMI1.WQXM: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] pid 75862 (asmctl), jid 0, uid 0: exited on signal 6 [...] ubt0 on uhub2 [...] ubt0: <Broadcom Corp Broadcom Bluetooth Device, class 224/1, rev 2.00/3.60, addr 4> on usbus0 [...] GEOM: iso9660/LIVE: the secondary GPT header is not in the last LBA. [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] wlan0: Ethernet address: ... [...] wlan0: Ethernet address: ... [...] iwn0: iwn_read_firmware: ucode rev=0x09dd0401 [...] iwn0: iwn_read_firmware: ucode rev=0x09dd0401 [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] ichwd0: <Intel QM57 watchdog timer> on isa0 [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP