[...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 7976001536 (7606 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM SLIC-WKS> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 2 6 7 3 4 5 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xcbf7f498-0xcbf7f4b6 [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-WKS> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] ix0: <Intel(R) X550-T2> mem 0xe0200000-0xe03fffff,0xe0404000-0xe0407fff irq 17 at device 0.0 on pci1 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 4 RX queues 4 TX queues [...] ix0: Using MSI-X interrupts with 5 vectors [...] ix0: allocated for 4 queues [...] ix0: allocated for 4 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: fw 2.11.3 nvm 1.00.0 eTrack 0x80000492 [...] ix0: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix1: <Intel(R) X550-T2> mem 0xe0000000-0xe01fffff,0xe0400000-0xe0403fff irq 16 at device 0.1 on pci1 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 4 RX queues 4 TX queues [...] ix1: Using MSI-X interrupts with 5 vectors [...] ix1: allocated for 4 queues [...] ix1: allocated for 4 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: fw 2.11.3 nvm 1.00.0 eTrack 0x80000492 [...] ix1: netmap queues/slots: TX 4/2048, RX 4/2048 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xef000000-0xef3fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xefe34000-0xefe37fff irq 16 at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xefe20000-0xefe2ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel Lynx Point KT Controller> port 0xf0e0-0xf0e7 mem 0xefe3e000-0xefe3efff irq 19 at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) I217-LM LPT> port 0xf080-0xf09f mem 0xefe00000-0xefe1ffff,0xefe3d000-0xefe3dfff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.13-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xefe3c000-0xefe3c3ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xefe30000-0xefe33fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb0: <Intel(R) I350 (Copper)> mem 0xef700000-0xef7fffff,0xefa0c000-0xefa0ffff irq 19 at device 0.0 on pci3 [...] igb0: EEPROM V1.67-0 Option ROM V17-b5-p10 eTrack 0x80000dd1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xef600000-0xef6fffff,0xefa08000-0xefa0bfff irq 16 at device 0.1 on pci3 [...] igb1: EEPROM V1.67-0 Option ROM V17-b5-p10 eTrack 0x80000dd1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xef500000-0xef5fffff,0xefa04000-0xefa07fff irq 17 at device 0.2 on pci3 [...] igb2: EEPROM V1.67-0 Option ROM V17-b5-p10 eTrack 0x80000dd1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xef400000-0xef4fffff,0xefa00000-0xefa03fff irq 18 at device 0.3 on pci3 [...] igb3: EEPROM V1.67-0 Option ROM V17-b5-p10 eTrack 0x80000dd1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> mem 0xefc00000-0xefc3ffff irq 16 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 16 at device 0.0 on pci5 [...] pci6: <PCI bus> on pcib6 [...] pci6: <processor> at device 0.0 (no driver attached) [...] pcib7: <PCI-PCI bridge> irq 16 at device 8.0 on pci5 [...] pci7: <PCI bus> on pcib7 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xefe3b000-0xefe3b3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH8+ (RAID) AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xefe3a000-0xefe3a7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 5 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] driver bug: Unable to set devclass (class: atkbdc devname: (unknown)) [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xca000-0xcafff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1696072244 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC221 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC221 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC221 (Analog)> at nid 23 and 26,27 on hdaa1 [...] pcm2: <Realtek ALC221 (Analog 2.0+HP)> at nid 20,33 on hdaa1 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub1 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2 on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <MTFDDAK256MAM-1K12 08TH> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] uhub1: 21 ports with 21 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] uhub2: 3 ports with 3 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] ugen0.2: <EATON Powerware 9130> at usbus0 [...] ugen0.3: <u-blox AG - www.u-blox.com u-blox 7 - GPS/GNSS Receiver> at usbus0 [...] umodem0 on uhub1 [...] umodem0: <u-blox AG - www.u-blox.com u-blox 7 - GPS/GNSS Receiver, class 2/0, rev 1.10/1.00, addr 2> on usbus0 [...] umodem0: data interface 1, has CM over data, has no break [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub3 on uhub2 [...] uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] uhub4: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen0.4: <vendor 0x04d9 product 0x1203> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <vendor 0x04d9 product 0x1203, class 0/0, rev 2.00/2.80, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] ichsmb0: <Intel Lynx Point SMBus controller> port 0xf040-0xf05f mem 0xefe39000-0xefe390ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMID.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] uhid0 on uhub1 [...] uhid0: <vendor 0x04d9 product 0x1203, class 0/0, rev 2.00/2.80, addr 3> on usbus0 [...] lo0: link state changed to UP [...] qat0: <Intel dh895xcc QuickAssist> mem 0xe0600000-0xe067ffff,0xefb40000-0xefb7ffff,0xefb00000-0xefb3ffff irq 16 at device 0.0 on pci6 [...] qat0: qat_dev0 started 12 acceleration engines [...] qat0: FW version: 4.18.0 [...] qat_ocf0: <QAT engine> [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] igb0: link state changed to DOWN [...] lagg0: IPv6 addresses on igb0 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] lagg0: link state changed to DOWN [...] igb1: link state changed to DOWN [...] lagg0: IPv6 addresses on igb1 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] igb2: link state changed to DOWN [...] lagg0: IPv6 addresses on igb2 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] igb3: link state changed to DOWN [...] lagg0: IPv6 addresses on igb3 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] ix0: link state changed to UP [...] lagg0: link state changed to UP [...] 267.496148 [ 852] iflib_netmap_config txr 4 rxr 4 txd 2048 rxd 2048 rbufsz 2048 [...] 267.496211 [ 852] iflib_netmap_config txr 4 rxr 4 txd 2048 rxd 2048 rbufsz 2048 [...] 267.496261 [ 852] iflib_netmap_config txr 4 rxr 4 txd 2048 rxd 2048 rbufsz 2048 [...] 267.599227 [ 852] iflib_netmap_config txr 4 rxr 4 txd 2048 rxd 2048 rbufsz 2048 [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] 270.112572 [ 852] iflib_netmap_config txr 4 rxr 4 txd 2048 rxd 2048 rbufsz 2048 [...] 270.112633 [ 852] iflib_netmap_config txr 4 rxr 4 txd 2048 rxd 2048 rbufsz 2048 [...] 270.112681 [ 852] iflib_netmap_config txr 4 rxr 4 txd 2048 rxd 2048 rbufsz 2048 [...] ix0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] ix0: link state changed to DOWN [...] ix0: 2 link states coalesced [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] [...] Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 8 5 2 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p2 stable/25.1-n269753-d27208952e13 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 1600x1200 [...] CPU microcode: no matching update found [...] CPU: Intel(R) Xeon(R) CPU E3-1245 v3 @ 3.40GHz (3392.28-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 7975997440 (7606 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM SLIC-WKS> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 7 2 4 6 3 5 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xcbf7f498-0xcbf7f4b6 [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-WKS> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] ix0: <Intel(R) X550-T2> mem 0xe0200000-0xe03fffff,0xe0404000-0xe0407fff irq 17 at device 0.0 on pci1 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 4 RX queues 4 TX queues [...] ix0: Using MSI-X interrupts with 5 vectors [...] ix0: allocated for 4 queues [...] ix0: allocated for 4 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: fw 2.11.3 nvm 1.00.0 eTrack 0x80000492 [...] ix0: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix1: <Intel(R) X550-T2> mem 0xe0000000-0xe01fffff,0xe0400000-0xe0403fff irq 16 at device 0.1 on pci1 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 4 RX queues 4 TX queues [...] ix1: Using MSI-X interrupts with 5 vectors [...] ix1: allocated for 4 queues [...] ix1: allocated for 4 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: fw 2.11.3 nvm 1.00.0 eTrack 0x80000492 [...] ix1: netmap queues/slots: TX 4/2048, RX 4/2048 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xef000000-0xef3fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xefe34000-0xefe37fff irq 16 at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xefe20000-0xefe2ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel Lynx Point KT Controller> port 0xf0e0-0xf0e7 mem 0xefe3e000-0xefe3efff irq 19 at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) I217-LM LPT> port 0xf080-0xf09f mem 0xefe00000-0xefe1ffff,0xefe3d000-0xefe3dfff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.13-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xefe3c000-0xefe3c3ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xefe30000-0xefe33fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb0: <Intel(R) I350 (Copper)> mem 0xef700000-0xef7fffff,0xefa0c000-0xefa0ffff irq 19 at device 0.0 on pci3 [...] igb0: EEPROM V1.67-0 Option ROM V17-b5-p10 eTrack 0x80000dd1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xef600000-0xef6fffff,0xefa08000-0xefa0bfff irq 16 at device 0.1 on pci3 [...] igb1: EEPROM V1.67-0 Option ROM V17-b5-p10 eTrack 0x80000dd1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xef500000-0xef5fffff,0xefa04000-0xefa07fff irq 17 at device 0.2 on pci3 [...] igb2: EEPROM V1.67-0 Option ROM V17-b5-p10 eTrack 0x80000dd1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xef400000-0xef4fffff,0xefa00000-0xefa03fff irq 18 at device 0.3 on pci3 [...] igb3: EEPROM V1.67-0 Option ROM V17-b5-p10 eTrack 0x80000dd1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> mem 0xefc00000-0xefc3ffff irq 16 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 16 at device 0.0 on pci5 [...] pci6: <PCI bus> on pcib6 [...] pci6: <processor> at device 0.0 (no driver attached) [...] pcib7: <PCI-PCI bridge> irq 16 at device 8.0 on pci5 [...] pci7: <PCI bus> on pcib7 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xefe3b000-0xefe3b3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH8+ (RAID) AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xefe3a000-0xefe3a7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 5 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] driver bug: Unable to set devclass (class: atkbdc devname: (unknown)) [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xca000-0xcafff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1696072568 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC221 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC221 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC221 (Analog)> at nid 23 and 26,27 on hdaa1 [...] pcm2: <Realtek ALC221 (Analog 2.0+HP)> at nid 20,33 on hdaa1 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub1 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2 on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <MTFDDAK256MAM-1K12 08TH> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] uhub1: 21 ports with 21 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] uhub2: 3 ports with 3 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] ugen0.2: <EATON Powerware 9130> at usbus0 [...] ugen0.3: <u-blox AG - www.u-blox.com u-blox 7 - GPS/GNSS Receiver> at usbus0 [...] umodem0 on uhub1 [...] umodem0: <u-blox AG - www.u-blox.com u-blox 7 - GPS/GNSS Receiver, class 2/0, rev 1.10/1.00, addr 2> on usbus0 [...] umodem0: data interface 1, has CM over data, has no break [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub3 on uhub2 [...] uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] uhub4: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen0.4: <vendor 0x04d9 product 0x1203> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <vendor 0x04d9 product 0x1203, class 0/0, rev 2.00/2.80, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] ichsmb0: <Intel Lynx Point SMBus controller> port 0xf040-0xf05f mem 0xefe39000-0xefe390ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMID.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] uhid0 on uhub1 [...] uhid0: <vendor 0x04d9 product 0x1203, class 0/0, rev 2.00/2.80, addr 3> on usbus0 [...] lo0: link state changed to UP [...] qat0: <Intel dh895xcc QuickAssist> mem 0xe0600000-0xe067ffff,0xefb40000-0xefb7ffff,0xefb00000-0xefb3ffff irq 16 at device 0.0 on pci6 [...] qat0: qat_dev0 started 12 acceleration engines [...] qat0: FW version: 4.18.0 [...] qat_ocf0: <QAT engine> [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] igb0: link state changed to DOWN [...] lagg0: IPv6 addresses on igb0 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] lagg0: link state changed to DOWN [...] igb1: link state changed to DOWN [...] lagg0: IPv6 addresses on igb1 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] igb2: link state changed to DOWN [...] lagg0: IPv6 addresses on igb2 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] igb3: link state changed to DOWN [...] lagg0: IPv6 addresses on igb3 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] ix0: link state changed to UP [...] lagg0: link state changed to UP [...] 809.568275 [ 852] iflib_netmap_config txr 4 rxr 4 txd 2048 rxd 2048 rbufsz 2048 [...] 809.568334 [ 852] iflib_netmap_config txr 4 rxr 4 txd 2048 rxd 2048 rbufsz 2048 [...] 809.568383 [ 852] iflib_netmap_config txr 4 rxr 4 txd 2048 rxd 2048 rbufsz 2048 [...] 809.671340 [ 852] iflib_netmap_config txr 4 rxr 4 txd 2048 rxd 2048 rbufsz 2048 [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] 812.184711 [ 852] iflib_netmap_config txr 4 rxr 4 txd 2048 rxd 2048 rbufsz 2048 [...] 812.184768 [ 852] iflib_netmap_config txr 4 rxr 4 txd 2048 rxd 2048 rbufsz 2048 [...] 812.184816 [ 852] iflib_netmap_config txr 4 rxr 4 txd 2048 rxd 2048 rbufsz 2048 [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] ix0: 2 link states coalesced [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 7 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p2 stable/25.1-n269753-d27208952e13 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 1600x1200 [...] CPU microcode: no matching update found [...] CPU: Intel(R) Xeon(R) CPU E3-1245 v3 @ 3.40GHz (3392.26-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 7976001536 (7606 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM SLIC-WKS> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 2 4 6 3 7 5 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xcbf7f498-0xcbf7f4b6 [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-WKS> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] ix0: <Intel(R) X550-T2> mem 0xe0200000-0xe03fffff,0xe0404000-0xe0407fff irq 17 at device 0.0 on pci1 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 4 RX queues 4 TX queues [...] ix0: Using MSI-X interrupts with 5 vectors [...] ix0: allocated for 4 queues [...] ix0: allocated for 4 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: fw 2.11.3 nvm 1.00.0 eTrack 0x80000492 [...] ix0: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix1: <Intel(R) X550-T2> mem 0xe0000000-0xe01fffff,0xe0400000-0xe0403fff irq 16 at device 0.1 on pci1 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 4 RX queues 4 TX queues [...] ix1: Using MSI-X interrupts with 5 vectors [...] ix1: allocated for 4 queues [...] ix1: allocated for 4 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: fw 2.11.3 nvm 1.00.0 eTrack 0x80000492 [...] ix1: netmap queues/slots: TX 4/2048, RX 4/2048 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xef000000-0xef3fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xefe34000-0xefe37fff irq 16 at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xefe20000-0xefe2ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel Lynx Point KT Controller> port 0xf0e0-0xf0e7 mem 0xefe3e000-0xefe3efff irq 19 at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) I217-LM LPT> port 0xf080-0xf09f mem 0xefe00000-0xefe1ffff,0xefe3d000-0xefe3dfff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.13-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xefe3c000-0xefe3c3ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xefe30000-0xefe33fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb0: <Intel(R) I350 (Copper)> mem 0xef700000-0xef7fffff,0xefa0c000-0xefa0ffff irq 19 at device 0.0 on pci3 [...] igb0: EEPROM V1.67-0 Option ROM V17-b5-p10 eTrack 0x80000dd1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xef600000-0xef6fffff,0xefa08000-0xefa0bfff irq 16 at device 0.1 on pci3 [...] igb1: EEPROM V1.67-0 Option ROM V17-b5-p10 eTrack 0x80000dd1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xef500000-0xef5fffff,0xefa04000-0xefa07fff irq 17 at device 0.2 on pci3 [...] igb2: EEPROM V1.67-0 Option ROM V17-b5-p10 eTrack 0x80000dd1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xef400000-0xef4fffff,0xefa00000-0xefa03fff irq 18 at device 0.3 on pci3 [...] igb3: EEPROM V1.67-0 Option ROM V17-b5-p10 eTrack 0x80000dd1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> mem 0xefc00000-0xefc3ffff irq 16 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 16 at device 0.0 on pci5 [...] pci6: <PCI bus> on pcib6 [...] pci6: <processor> at device 0.0 (no driver attached) [...] pcib7: <PCI-PCI bridge> irq 16 at device 8.0 on pci5 [...] pci7: <PCI bus> on pcib7 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xefe3b000-0xefe3b3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH8+ (RAID) AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xefe3a000-0xefe3a7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 5 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] driver bug: Unable to set devclass (class: atkbdc devname: (unknown)) [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xca000-0xcafff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1696072575 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC221 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC221 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC221 (Analog)> at nid 23 and 26,27 on hdaa1 [...] pcm2: <Realtek ALC221 (Analog 2.0+HP)> at nid 20,33 on hdaa1 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub0 on usbus2 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub2 on usbus0 [...] uhub2: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <MTFDDAK256MAM-1K12 08TH> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] uhub2: 21 ports with 21 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] uhub1: 3 ports with 3 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] ugen0.2: <EATON Powerware 9130> at usbus0 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] ugen0.3: <u-blox AG - www.u-blox.com u-blox 7 - GPS/GNSS Receiver> at usbus0 [...] umodem0 on uhub2 [...] umodem0: <u-blox AG - www.u-blox.com u-blox 7 - GPS/GNSS Receiver, class 2/0, rev 1.10/1.00, addr 2> on usbus0 [...] umodem0: data interface 1, has CM over data, has no break [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] ugen0.4: <vendor 0x04d9 product 0x1203> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <vendor 0x04d9 product 0x1203, class 0/0, rev 2.00/2.80, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] ichsmb0: <Intel Lynx Point SMBus controller> port 0xf040-0xf05f mem 0xefe39000-0xefe390ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMID.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] uhid0 on uhub2 [...] uhid0: <vendor 0x04d9 product 0x1203, class 0/0, rev 2.00/2.80, addr 3> on usbus0 [...] lo0: link state changed to UP [...] qat0: <Intel dh895xcc QuickAssist> mem 0xe0600000-0xe067ffff,0xefb40000-0xefb7ffff,0xefb00000-0xefb3ffff irq 16 at device 0.0 on pci6 [...] qat0: qat_dev0 started 12 acceleration engines [...] qat0: FW version: 4.18.0 [...] qat_ocf0: <QAT engine> [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] igb0: link state changed to DOWN [...] lagg0: IPv6 addresses on igb0 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] lagg0: link state changed to DOWN [...] igb1: link state changed to DOWN [...] lagg0: IPv6 addresses on igb1 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] igb2: link state changed to DOWN [...] lagg0: IPv6 addresses on igb2 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] igb3: link state changed to DOWN [...] lagg0: IPv6 addresses on igb3 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] ix0: link state changed to UP [...] lagg0: link state changed to UP [...] 610.712083 [ 852] iflib_netmap_config txr 4 rxr 4 txd 2048 rxd 2048 rbufsz 2048 [...] 610.712144 [ 852] iflib_netmap_config txr 4 rxr 4 txd 2048 rxd 2048 rbufsz 2048 [...] 610.712194 [ 852] iflib_netmap_config txr 4 rxr 4 txd 2048 rxd 2048 rbufsz 2048 [...] 610.816793 [ 852] iflib_netmap_config txr 4 rxr 4 txd 2048 rxd 2048 rbufsz 2048 [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] 613.330251 [ 852] iflib_netmap_config txr 4 rxr 4 txd 2048 rxd 2048 rbufsz 2048 [...] 613.330308 [ 852] iflib_netmap_config txr 4 rxr 4 txd 2048 rxd 2048 rbufsz 2048 [...] 613.330357 [ 852] iflib_netmap_config txr 4 rxr 4 txd 2048 rxd 2048 rbufsz 2048 [...] ix0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX is using my IP address XXX.XXX.XXX.XXX on lagg0! [...] arp: XXX is using my IP address XXX.XXX.XXX.XXX on lagg0! [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX is using my IP address XXX.XXX.XXX.XXX on lagg0! [...] arp: XXX is using my IP address XXX.XXX.XXX.XXX on lagg0! [...] arp: XXX is using my IP address XXX.XXX.XXX.XXX on lagg0! [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] ix0: link state changed to DOWN [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] ix0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] ix0: link state changed to DOWN [...] ix0: 2 link states coalesced [...] ix0: link state changed to DOWN [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] ix0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 6 5 0 0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p2 stable/25.1-n269753-d27208952e13 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 1600x1200 [...] CPU microcode: no matching update found [...] CPU: Intel(R) Xeon(R) CPU E3-1245 v3 @ 3.40GHz (3392.27-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 7976001536 (7606 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM SLIC-WKS> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 5 6 4 2 3 7 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xcbf7f498-0xcbf7f4b6 [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-WKS> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] ix0: <Intel(R) X550-T2> mem 0xe0200000-0xe03fffff,0xe0404000-0xe0407fff irq 17 at device 0.0 on pci1 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 4 RX queues 4 TX queues [...] ix0: Using MSI-X interrupts with 5 vectors [...] ix0: allocated for 4 queues [...] ix0: allocated for 4 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: fw 2.11.3 nvm 1.00.0 eTrack 0x80000492 [...] ix0: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix1: <Intel(R) X550-T2> mem 0xe0000000-0xe01fffff,0xe0400000-0xe0403fff irq 16 at device 0.1 on pci1 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 4 RX queues 4 TX queues [...] ix1: Using MSI-X interrupts with 5 vectors [...] ix1: allocated for 4 queues [...] ix1: allocated for 4 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: fw 2.11.3 nvm 1.00.0 eTrack 0x80000492 [...] ix1: netmap queues/slots: TX 4/2048, RX 4/2048 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xef000000-0xef3fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xefe34000-0xefe37fff irq 16 at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xefe20000-0xefe2ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel Lynx Point KT Controller> port 0xf0e0-0xf0e7 mem 0xefe3e000-0xefe3efff irq 19 at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) I217-LM LPT> port 0xf080-0xf09f mem 0xefe00000-0xefe1ffff,0xefe3d000-0xefe3dfff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.13-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xefe3c000-0xefe3c3ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xefe30000-0xefe33fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb0: <Intel(R) I350 (Copper)> mem 0xef700000-0xef7fffff,0xefa0c000-0xefa0ffff irq 19 at device 0.0 on pci3 [...] igb0: EEPROM V1.67-0 Option ROM V17-b5-p10 eTrack 0x80000dd1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xef600000-0xef6fffff,0xefa08000-0xefa0bfff irq 16 at device 0.1 on pci3 [...] igb1: EEPROM V1.67-0 Option ROM V17-b5-p10 eTrack 0x80000dd1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xef500000-0xef5fffff,0xefa04000-0xefa07fff irq 17 at device 0.2 on pci3 [...] igb2: EEPROM V1.67-0 Option ROM V17-b5-p10 eTrack 0x80000dd1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xef400000-0xef4fffff,0xefa00000-0xefa03fff irq 18 at device 0.3 on pci3 [...] igb3: EEPROM V1.67-0 Option ROM V17-b5-p10 eTrack 0x80000dd1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> mem 0xefc00000-0xefc3ffff irq 16 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 16 at device 0.0 on pci5 [...] pci6: <PCI bus> on pcib6 [...] pci6: <processor> at device 0.0 (no driver attached) [...] pcib7: <PCI-PCI bridge> irq 16 at device 8.0 on pci5 [...] pci7: <PCI bus> on pcib7 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xefe3b000-0xefe3b3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH8+ (RAID) AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xefe3a000-0xefe3a7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 5 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] driver bug: Unable to set devclass (class: atkbdc devname: (unknown)) [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xca000-0xcafff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1696072623 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC221 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC221 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC221 (Analog)> at nid 23 and 26,27 on hdaa1 [...] pcm2: <Realtek ALC221 (Analog 2.0+HP)> at nid 20,33 on hdaa1 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub1 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] sysctl_warn_reuse: can't re-use a leaf (dev.uhub.%parent)! [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub2 on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <MTFDDAK256MAM-1K12 08TH> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] uhub1: 21 ports with 21 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] uhub2: 3 ports with 3 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] ugen0.2: <EATON Powerware 9130> at usbus0 [...] ugen0.3: <u-blox AG - www.u-blox.com u-blox 7 - GPS/GNSS Receiver> at usbus0 [...] umodem0 on uhub1 [...] umodem0: <u-blox AG - www.u-blox.com u-blox 7 - GPS/GNSS Receiver, class 2/0, rev 1.10/1.00, addr 2> on usbus0 [...] umodem0: data interface 1, has CM over data, has no break [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub3 on uhub2 [...] uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] uhub4: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen0.4: <vendor 0x04d9 product 0x1203> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <vendor 0x04d9 product 0x1203, class 0/0, rev 2.00/2.80, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] ichsmb0: <Intel Lynx Point SMBus controller> port 0xf040-0xf05f mem 0xefe39000-0xefe390ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMID.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] uhid0 on uhub1 [...] uhid0: <vendor 0x04d9 product 0x1203, class 0/0, rev 2.00/2.80, addr 3> on usbus0 [...] lo0: link state changed to UP [...] qat0: <Intel dh895xcc QuickAssist> mem 0xe0600000-0xe067ffff,0xefb40000-0xefb7ffff,0xefb00000-0xefb3ffff irq 16 at device 0.0 on pci6 [...] qat0: qat_dev0 started 12 acceleration engines [...] qat0: FW version: 4.18.0 [...] qat_ocf0: <QAT engine> [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] igb0: link state changed to DOWN [...] lagg0: IPv6 addresses on igb0 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] lagg0: link state changed to DOWN [...] igb1: link state changed to DOWN [...] lagg0: IPv6 addresses on igb1 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] igb2: link state changed to DOWN [...] lagg0: IPv6 addresses on igb2 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] igb3: link state changed to DOWN [...] lagg0: IPv6 addresses on igb3 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] ix0: link state changed to UP [...] lagg0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] 786.539948 [ 852] iflib_netmap_config txr 4 rxr 4 txd 2048 rxd 2048 rbufsz 2048 [...] 786.540013 [ 852] iflib_netmap_config txr 4 rxr 4 txd 2048 rxd 2048 rbufsz 2048 [...] 786.540062 [ 852] iflib_netmap_config txr 4 rxr 4 txd 2048 rxd 2048 rbufsz 2048 [...] 786.646970 [ 852] iflib_netmap_config txr 4 rxr 4 txd 2048 rxd 2048 rbufsz 2048 [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] 789.160893 [ 852] iflib_netmap_config txr 4 rxr 4 txd 2048 rxd 2048 rbufsz 2048 [...] 789.160953 [ 852] iflib_netmap_config txr 4 rxr 4 txd 2048 rxd 2048 rbufsz 2048 [...] 789.161001 [ 852] iflib_netmap_config txr 4 rxr 4 txd 2048 rxd 2048 rbufsz 2048 [...] ix0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] [...] Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 137 136 1 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p3 stable/25.1-n269825-cbaf3aa6b26b SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 1600x1200 [...] CPU microcode: no matching update found [...] CPU: Intel(R) Xeon(R) CPU E3-1245 v3 @ 3.40GHz (3392.34-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 7973908480 (7604 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM SLIC-WKS> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 6 4 7 5 3 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xcbf7f498-0xcbf7f4b6 [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-WKS> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] ix0: <Intel(R) X550-T2> mem 0xe0200000-0xe03fffff,0xe0404000-0xe0407fff irq 17 at device 0.0 on pci1 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 4 RX queues 4 TX queues [...] ix0: Using MSI-X interrupts with 5 vectors [...] ix0: allocated for 4 queues [...] ix0: allocated for 4 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: fw 2.11.3 nvm 1.00.0 eTrack 0x80000492 [...] ix0: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix1: <Intel(R) X550-T2> mem 0xe0000000-0xe01fffff,0xe0400000-0xe0403fff irq 16 at device 0.1 on pci1 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 4 RX queues 4 TX queues [...] ix1: Using MSI-X interrupts with 5 vectors [...] ix1: allocated for 4 queues [...] ix1: allocated for 4 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: fw 2.11.3 nvm 1.00.0 eTrack 0x80000492 [...] ix1: netmap queues/slots: TX 4/2048, RX 4/2048 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xef000000-0xef3fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xefe34000-0xefe37fff irq 16 at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xefe20000-0xefe2ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel Lynx Point KT Controller> port 0xf0e0-0xf0e7 mem 0xefe3e000-0xefe3efff irq 19 at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) I217-LM LPT> port 0xf080-0xf09f mem 0xefe00000-0xefe1ffff,0xefe3d000-0xefe3dfff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.13-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xefe3c000-0xefe3c3ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xefe30000-0xefe33fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb0: <Intel(R) I350 (Copper)> mem 0xef700000-0xef7fffff,0xefa0c000-0xefa0ffff irq 19 at device 0.0 on pci3 [...] igb0: EEPROM V1.67-0 Option ROM V17-b5-p10 eTrack 0x80000dd1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xef600000-0xef6fffff,0xefa08000-0xefa0bfff irq 16 at device 0.1 on pci3 [...] igb1: EEPROM V1.67-0 Option ROM V17-b5-p10 eTrack 0x80000dd1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xef500000-0xef5fffff,0xefa04000-0xefa07fff irq 17 at device 0.2 on pci3 [...] igb2: EEPROM V1.67-0 Option ROM V17-b5-p10 eTrack 0x80000dd1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xef400000-0xef4fffff,0xefa00000-0xefa03fff irq 18 at device 0.3 on pci3 [...] igb3: EEPROM V1.67-0 Option ROM V17-b5-p10 eTrack 0x80000dd1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> mem 0xefc00000-0xefc3ffff irq 16 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 16 at device 0.0 on pci5 [...] pci6: <PCI bus> on pcib6 [...] pci6: <processor> at device 0.0 (no driver attached) [...] pcib7: <PCI-PCI bridge> irq 16 at device 8.0 on pci5 [...] pci7: <PCI bus> on pcib7 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xefe3b000-0xefe3b3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH8+ (RAID) AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xefe3a000-0xefe3a7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 5 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] driver bug: Unable to set devclass (class: atkbdc devname: (unknown)) [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xca000-0xcafff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1696072249 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC221 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC221 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC221 (Analog)> at nid 23 and 26,27 on hdaa1 [...] pcm2: <Realtek ALC221 (Analog 2.0+HP)> at nid 20,33 on hdaa1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub2 on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <MTFDDAK256MAM-1K12 08TH> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] uhub0: 21 ports with 21 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] uhub2: 3 ports with 3 removable, self powered [...] uhub1: 3 ports with 3 removable, self powered [...] ugen0.2: <EATON Powerware 9130> at usbus0 [...] ugen0.3: <u-blox AG - www.u-blox.com u-blox 7 - GPS/GNSS Receiver> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <u-blox AG - www.u-blox.com u-blox 7 - GPS/GNSS Receiver, class 2/0, rev 1.10/1.00, addr 2> on usbus0 [...] umodem0: data interface 1, has CM over data, has no break [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub3 on uhub2 [...] uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub4 on uhub1 [...] uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] uhub4: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen0.4: <vendor 0x04d9 product 0x1203> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <vendor 0x04d9 product 0x1203, class 0/0, rev 2.00/2.80, addr 3> on usbus0 [...] kbd2 at ukbd0