[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE releng/13.2-n254617-525ecfdad597 GENERIC amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: AMD A6-6310 APU with AMD Radeon R4 Graphics (1796.68-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x730f01 Family=0x16 Model=0x30 Stepping=1 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1d4037ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,Topology,PNXC,DBE,PTSC,PL2I> [...] Structured Extended Features=0x8<BMI1> [...] XSAVE Features=0x1<XSAVEOPT> [...] SVM: NP,NRIP,AFlush,DAssist,NAsids=8 [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 15495405568 (14777 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <LENOVO TC-03 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796) [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 2 1 3 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.8, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <LENOVO TC-03> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xd0000000-0xd07fffff,0xfea00000-0xfea3ffff irq 44 at device 1.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <ATI Kabini HDA Controller> mem 0xfea64000-0xfea67fff irq 45 at device 1.1 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 42 at device 2.3 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfe904000-0xfe904fff,0xfe900000-0xfe903fff irq 32 at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: turning off MSI enable bit. [...] re0: ASPM disabled [...] re0: Chip rev. 0x2c800000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib2: <ACPI PCI-PCI bridge> irq 43 at device 2.4 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] rtsx0: <2.1g Realtek RTS5229 PCIe SD Card Reader> mem 0xfe800000-0xfe800fff irq 36 at device 0.0 on pci2 [...] rtsx0: No card is detected [...] pcib3: <ACPI PCI-PCI bridge> irq 40 at device 2.5 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ath0: <Atheros AR9485> mem 0xfe700000-0xfe77ffff irq 40 at device 0.0 on pci3 [...] ar9300_flash_map: unimplemented for now [...] Restoring Cal data from DRAM [...] Restoring Cal data from EEPROM [...] Restoring Cal data from Flash [...] Restoring Cal data from Flash [...] Restoring Cal data from OTP [...] ar9300_hw_attach: ar9300_eeprom_attach returned 0 [...] ath0: [HT] enabling HT modes [...] ath0: [HT] enabling short-GI in 20MHz mode [...] ath0: [HT] 1 stream STBC receive enabled [...] ath0: [HT] 1 RX streams; 1 TX streams [...] ath0: AR9485 mac 576.1 RF5110 phy 3018.4 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 [...] pci0: <encrypt/decrypt> at device 8.0 (no driver attached) [...] xhci0: <AMD FCH USB 3.0 controller> mem 0xfea68000-0xfea69fff irq 18 at device 16.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AMD Hudson-2 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfea6e000-0xfea6e3ff irq 19 at device 17.0 on pci0 [...] ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ehci0: <AMD FCH USB 2.0 controller> mem 0xfea6d000-0xfea6d0ff irq 18 at device 18.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] ehci1: <AMD FCH USB 2.0 controller> mem 0xfea6c000-0xfea6c0ff irq 18 at device 19.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] hdac1: <AMD Hudson-2 HDA Controller> mem 0xfea60000-0xfea63fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC" frequency 1796630110 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC272 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC272 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC272 (Analog 2.0+HP/2.0)> at nid 26,33 and 24 on hdaa1 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <TS120GSSD220S SBFRJA.3> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <TSSTcorp CDDVDW SN-208FB LF01> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] ugen2.1: <AMD EHCI root HUB> at usbus2 [...] ugen1.1: <AMD EHCI root HUB> at usbus1 [...] ugen0.1: <AMD XHCI root HUB> at usbus0 [...] uhub0 on usbus2 [...] uhub0: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub1 on usbus0 [...] uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2 on usbus1 [...] uhub2: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] Trying to mount root from zfs:tank/root []... [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.2: <vendor 0x0430 product 0x100e> at usbus0 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x0430 product 0x100e, class 9/0, rev 2.00/1.05, addr 1> on usbus0 [...] uhub2: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub3: 4 ports with 3 removable, bus powered [...] ugen1.2: <vendor 0x0438 product 0x7900> at usbus1 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> on usbus1 [...] ugen2.2: <vendor 0x0438 product 0x7900> at usbus2 [...] uhub5 on uhub0 [...] uhub5: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> on usbus2 [...] uhub4: 4 ports with 4 removable, self powered [...] uhub5: 4 ports with 4 removable, self powered [...] ugen0.3: <vendor 0x0430 Sun USB Keyboard> at usbus0 [...] ukbd0 on uhub3 [...] ukbd0: <vendor 0x0430 Sun USB Keyboard, class 0/0, rev 2.00/1.05, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus2 [...] ugen2.3: <Vimicro corp. Lenovo USB2.0 UVC Camera> at usbus2 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] lo0: link state changed to UP [...] re0: link state changed to UP [...] uaudio0 on uhub5 [...] uaudio0: <Lenovo USB2.0 Audio> on usbus2 [...] uaudio0: No playback. [...] uaudio0: Record[0]: 48000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 44100 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm2: <USB audio> on uaudio0 [...] uaudio0: No HID volume keys found. [...] Accounting enabled [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 done [...] All buffers synced. [...] Uptime: 2m24s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE releng/13.2-n254617-525ecfdad597 GENERIC amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: AMD A6-6310 APU with AMD Radeon R4 Graphics (1796.72-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x730f01 Family=0x16 Model=0x30 Stepping=1 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1d4037ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,Topology,PNXC,DBE,PTSC,PL2I> [...] Structured Extended Features=0x8<BMI1> [...] XSAVE Features=0x1<XSAVEOPT> [...] SVM: NP,NRIP,AFlush,DAssist,NAsids=8 [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 15495405568 (14777 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <LENOVO TC-03 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796) [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 2 1 3 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.8, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <LENOVO TC-03> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xd0000000-0xd07fffff,0xfea00000-0xfea3ffff irq 44 at device 1.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <ATI Kabini HDA Controller> mem 0xfea64000-0xfea67fff irq 45 at device 1.1 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 42 at device 2.3 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfe904000-0xfe904fff,0xfe900000-0xfe903fff irq 32 at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x2c800000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib2: <ACPI PCI-PCI bridge> irq 43 at device 2.4 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] rtsx0: <2.1g Realtek RTS5229 PCIe SD Card Reader> mem 0xfe800000-0xfe800fff irq 36 at device 0.0 on pci2 [...] rtsx0: No card is detected [...] pcib3: <ACPI PCI-PCI bridge> irq 40 at device 2.5 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ath0: <Atheros AR9485> mem 0xfe700000-0xfe77ffff irq 40 at device 0.0 on pci3 [...] ar9300_flash_map: unimplemented for now [...] Restoring Cal data from DRAM [...] Restoring Cal data from EEPROM [...] Restoring Cal data from Flash [...] Restoring Cal data from Flash [...] Restoring Cal data from OTP [...] ar9300_hw_attach: ar9300_eeprom_attach returned 0 [...] ath0: [HT] enabling HT modes [...] ath0: [HT] enabling short-GI in 20MHz mode [...] ath0: [HT] 1 stream STBC receive enabled [...] ath0: [HT] 1 RX streams; 1 TX streams [...] ath0: AR9485 mac 576.1 RF5110 phy 3018.4 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 [...] pci0: <encrypt/decrypt> at device 8.0 (no driver attached) [...] xhci0: <AMD FCH USB 3.0 controller> mem 0xfea68000-0xfea69fff irq 18 at device 16.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AMD Hudson-2 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfea6e000-0xfea6e3ff irq 19 at device 17.0 on pci0 [...] ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ehci0: <AMD FCH USB 2.0 controller> mem 0xfea6d000-0xfea6d0ff irq 18 at device 18.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] ehci1: <AMD FCH USB 2.0 controller> mem 0xfea6c000-0xfea6c0ff irq 18 at device 19.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] hdac1: <AMD Hudson-2 HDA Controller> mem 0xfea60000-0xfea63fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC" frequency 1796630295 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen1.1: <AMD EHCI root HUB> at usbus1 [...] ugen0.1: <AMD XHCI root HUB> at usbus0 [...] ugen2.1: <AMD EHCI root HUB> at usbus2 [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC272 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC272 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC272 (Analog 2.0+HP/2.0)> at nid 26,33 and 24 on hdaa1 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <TS120GSSD220S SBFRJA.3> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <TSSTcorp CDDVDW SN-208FB LF01> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] Trying to mount root from zfs:tank/root []... [...] uhub0 on usbus1 [...] uhub0: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus2 [...] uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub2 on usbus0 [...] uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2: 4 ports with 4 removable, self powered [...] ugen0.2: <vendor 0x0430 product 0x100e> at usbus0 [...] uhub3 on uhub2 [...] uhub3: <vendor 0x0430 product 0x100e, class 9/0, rev 2.00/1.05, addr 1> on usbus0 [...] Root mount waiting for:uhub0: 2 ports with 2 removable, self powered [...] usbus0 usbus1 usbus2 [...] uhub1: 2 ports with 2 removable, self powered [...] uhub3: 4 ports with 3 removable, bus powered [...] ugen1.2: <vendor 0x0438 product 0x7900> at usbus1 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> on usbus1 [...] ugen2.2: <vendor 0x0438 product 0x7900> at usbus2 [...] uhub5 on uhub1 [...] uhub5: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> on usbus2 [...] uhub4: 4 ports with 4 removable, self powered [...] uhub5: 4 ports with 4 removable, self powered [...] ugen0.3: <vendor 0x0430 Sun USB Keyboard> at usbus0 [...] ukbd0 on uhub3 [...] ukbd0: <vendor 0x0430 Sun USB Keyboard, class 0/0, rev 2.00/1.05, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus2 [...] ugen2.3: <Vimicro corp. Lenovo USB2.0 UVC Camera> at usbus2 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] uaudio0 on uhub5 [...] uaudio0: <Lenovo USB2.0 Audio> on usbus2 [...] uaudio0: No playback. [...] uaudio0: Record[0]: 48000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 44100 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm2: <USB audio> on uaudio0 [...] uaudio0: No HID volume keys found.