[...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE r366954 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i7-2637M CPU @ 1.70GHz (1696.19-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3975081984 (3790 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <NEC ND000208> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] arc4random: no preloaded entropy cache [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 3 2 [...] Timecounter "TSC" frequency 1696186205 Hz quality 1000 [...] random: entropy device external interface [...] md0: Preloaded image </data/XXXXXXXXXXXX 14385152 bytes at 0xffffffff82861cc0 [...] 000.000055 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 [...] kbd1 at kbdmux0 [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <NEC ND000208> on motherboard [...] acpi_ec_ecdt_probe: can't get handle [...] acpi0: Power Button (fixed) [...] ACPI Error: No handler for Region [EC__] (0xfffff80004501200) [EmbeddedControl] (20200430/evregion-288) [...] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20200430/exfldio-428) [...] ACPI Error: Aborting method \134_SB.PCI0.LPCB.EC.BAT1._STA due to previous error (AE_NOT_EXIST) (20200430/psparse-689) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: _OSC failed: AE_BUFFER_OVERFLOW [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf6400000-0xf67fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel AMT - KT Controller> port 0xf0e0-0xf0e7 mem 0xf7e2a000-0xf7e2afff irq 19 at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xf7e00000-0xf7e1ffff,0xf7e29000-0xf7e29fff irq 20 at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xf7e28000-0xf7e283ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Cougar Point HDA Controller> mem 0xf7e20000-0xf7e23fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] ath0: <Atheros 9285> mem 0xf7d00000-0xf7d0ffff irq 17 at device 0.0 on pci2 [...] [ath] AR9285 Main LNA config: LNA2 [...] [ath] AR9285 Alt LNA config: LNA1 [...] [ath] LNA diversity enabled, Diversity enabled [...] [ath] Enabling diversity for Kite [...] ath0: [HT] enabling HT modes [...] ath0: [HT] 1 stream STBC receive enabled [...] ath0: [HT] 1 RX streams; 1 TX streams [...] arc4random: no preloaded entropy cache [...] ath0: AR9285 mac 192.2 RF5133 phy 14.0 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pcib0: _OSC failed: AE_BUFFER_OVERFLOW [...] pci3: <ACPI PCI bus> on pcib3 [...] cbb0: <PCI-CardBus Bridge> mem 0xf7c01000-0xf7c01fff irq 18 at device 0.0 on pci3 [...] cardbus0: <CardBus bus> on cbb0 [...] pccard0: <16-bit PCCard bus> on cbb0 [...] pccard0: Deprecated code (to be removed in FreeBSD 13): PC Card to be removed. [...] sdhci_pci0: <RICOH R5CE823 SD> mem 0xf7c00000-0xf7c000ff irq 19 at device 0.1 on pci3 [...] sdhci_pci0: 1 slot(s) allocated [...] ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xf7e27000-0xf7e273ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7e26000-0xf7e267ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] acpi_tz2: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] psm0: model Generic PS/2 mouse, device ID 0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present; [...] to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. [...] ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior. [...] Consider tuning vm.kmem_size and vm.kmem_size_max [...] in /boot/loader.conf. [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC262 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC262 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC262 (Analog 2.0+HP/2.0)> at nid 22,21 and 24 on hdaa0 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] Trying to mount root from ufs:/dev/md0 []... [...] Root mount waiting for: usbus0 usbus1 CAM [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <TOSHIBA THNSNF128GCSS FSPAN102> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] Root mount waiting for: usbus0 usbus1 [...] uhub1: 3 ports with 3 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] Root mount waiting for: usbus0 usbus1 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub2: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen1.3: <USB Disk 2.0> at usbus1 [...] umass0 on uhub2 [...] umass0: <USB Disk 2.0, class 0/0, rev 2.00/2.00, addr 3> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:3:0: Attached to scbus3 [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <VendorCo ProductCode 2.00> Removable Direct Access SPC-2 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 15000MB (30720000 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] GEOM: da0: the secondary GPT table is corrupt or invalid. [...] GEOM: da0: using the primary only -- recovery suggested. [...] GEOM: iso9660/LIVE: the secondary GPT table is corrupt or invalid. [...] GEOM: iso9660/LIVE: using the primary only -- recovery suggested. [...] random: unblocking device. [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] Trying to mount root from zfs:livecd []... [...] Cuse v0.1.36 @ /dev/cuse [...] lo0: link state changed to UP [...] GEOM: iso9660/LIVE: the secondary GPT table is corrupt or invalid. [...] GEOM: iso9660/LIVE: using the primary only -- recovery suggested. [...] wlan0: Ethernet address: ... [...] wlan0: Ethernet address: ... [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xdba00000, size 0x4000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector LVDS-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.LVDS-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector VGA-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.VGA-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0 [...] VT: Replacing driver "vga" with new "fb". [...] start FB_INFO: [...] type=11 height=768 width=1024 depth=32 [...] cmsize=16 size=4096000 [...] pbase=0xe0061000 vbase=0xfffff800e0061000 [...] name=drmn0 flags=0x0 stride=5120 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: inteldrmfb frame buffer device [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_video0: <ACPI video extension> on vgapci0 [...] interface fusefs.1 already present in the KLD 'fuse.ko'! [...] linker_load_file: /boot/kernel/fusefs.ko - unsupported file type [...] ichwd0: <Intel Cougar Point watchdog timer> on isa0 [...] pid 2369 (python3.7), jid 0, uid 1000: exited on signal 11 [...] em0: link state changed to UP [...] pid 3195 (launch), jid 0, uid 1000: exited on signal 6 [...] pid 3187 (menubar), jid 0, uid 1000: exited on signal 6 [...] pid 3188 (gmenudbusmenuproxy), jid 0, uid 1000: exited on signal 6 [...] pid 3194 (launch), jid 0, uid 1000: exited on signal 6 [...] pid 3197 (cyber-dock), jid 0, uid 1000: exited on signal 6 [...] pid 3193 (launch), jid 0, uid 1000: exited on signal 6 [...] pid 3189 (filer-qt), jid 0, uid 1000: exited on signal 6 [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] All buffers synced. [...] Uptime: 10m6s [...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE r366954 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i7-2637M CPU @ 1.70GHz (1696.19-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3975081984 (3790 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <NEC ND000208> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] arc4random: no preloaded entropy cache [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 2 3 [...] Timecounter "TSC" frequency 1696186502 Hz quality 1000 [...] random: entropy device external interface [...] md0: Preloaded image </data/XXXXXXXXXXXX 14385152 bytes at 0xffffffff82485448 [...] 000.000066 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 [...] kbd1 at kbdmux0 [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <NEC ND000208> on motherboard [...] acpi_ec_ecdt_probe: can't get handle [...] acpi0: Power Button (fixed) [...] ACPI Error: No handler for Region [EC__] (0xfffff8000452ee00) [EmbeddedControl] (20200430/evregion-288) [...] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20200430/exfldio-428) [...] ACPI Error: Aborting method \134_SB.PCI0.LPCB.EC.BAT1._STA due to previous error (AE_NOT_EXIST) (20200430/psparse-689) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: _OSC failed: AE_BUFFER_OVERFLOW [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf6400000-0xf67fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel AMT - KT Controller> port 0xf0e0-0xf0e7 mem 0xf7e2a000-0xf7e2afff irq 19 at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xf7e00000-0xf7e1ffff,0xf7e29000-0xf7e29fff irq 20 at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xf7e28000-0xf7e283ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Cougar Point HDA Controller> mem 0xf7e20000-0xf7e23fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] ath0: <Atheros 9285> mem 0xf7d00000-0xf7d0ffff irq 17 at device 0.0 on pci2 [...] [ath] AR9285 Main LNA config: LNA2 [...] [ath] AR9285 Alt LNA config: LNA1 [...] [ath] LNA diversity enabled, Diversity enabled [...] [ath] Enabling diversity for Kite [...] ath0: [HT] enabling HT modes [...] ath0: [HT] 1 stream STBC receive enabled [...] ath0: [HT] 1 RX streams; 1 TX streams [...] arc4random: no preloaded entropy cache [...] ath0: AR9285 mac 192.2 RF5133 phy 14.0 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pcib0: _OSC failed: AE_BUFFER_OVERFLOW [...] pci3: <ACPI PCI bus> on pcib3 [...] cbb0: <PCI-CardBus Bridge> mem 0xf7c01000-0xf7c01fff irq 18 at device 0.0 on pci3 [...] cardbus0: <CardBus bus> on cbb0 [...] pccard0: <16-bit PCCard bus> on cbb0 [...] pccard0: Deprecated code (to be removed in FreeBSD 13): PC Card to be removed. [...] sdhci_pci0: <RICOH R5CE823 SD> mem 0xf7c00000-0xf7c000ff irq 19 at device 0.1 on pci3 [...] sdhci_pci0: 1 slot(s) allocated [...] ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xf7e27000-0xf7e273ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7e26000-0xf7e267ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] acpi_tz2: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] psm0: model Generic PS/2 mouse, device ID 0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present; [...] to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. [...] ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior. [...] Consider tuning vm.kmem_size and vm.kmem_size_max [...] in /boot/loader.conf. [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC262 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC262 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC262 (Analog 2.0+HP/2.0)> at nid 22,21 and 24 on hdaa0 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] arc4random: no preloaded entropy cache [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] Trying to mount root from ufs:/dev/md0 []... [...] Root mount waiting for: usbus0 usbus1 CAM [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <TOSHIBA THNSNF128GCSS FSPAN102> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] Root mount waiting for: usbus0 usbus1 [...] uhub1: 3 ports with 3 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] Root mount waiting for: usbus0 usbus1 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub2: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen1.3: <USB Disk 2.0> at usbus1 [...] umass0 on uhub2 [...] umass0: <USB Disk 2.0, class 0/0, rev 2.00/2.00, addr 3> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:3:0: Attached to scbus3 [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <VendorCo ProductCode 2.00> Removable Direct Access SPC-2 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 15000MB (30720000 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] GEOM: da0: the secondary GPT table is corrupt or invalid. [...] GEOM: da0: using the primary only -- recovery suggested. [...] GEOM: iso9660/LIVE: the secondary GPT table is corrupt or invalid. [...] GEOM: iso9660/LIVE: using the primary only -- recovery suggested. [...] random: unblocking device. [...] arc4random: no preloaded entropy cache [...] Trying to mount root from zfs:livecd []... [...] Cuse v0.1.36 @ /dev/cuse [...] lo0: link state changed to UP [...] em0: link state changed to UP [...] GEOM: iso9660/LIVE: the secondary GPT table is corrupt or invalid. [...] GEOM: iso9660/LIVE: using the primary only -- recovery suggested. [...] wlan0: Ethernet address: ... [...] wlan0: Ethernet address: ... [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xdba00000, size 0x4000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector LVDS-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.LVDS-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector VGA-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.VGA-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0 [...] VT: Replacing driver "vga" with new "fb". [...] start FB_INFO: [...] type=11 height=768 width=1024 depth=32 [...] cmsize=16 size=4096000 [...] pbase=0xe0061000 vbase=0xfffff800e0061000 [...] name=drmn0 flags=0x0 stride=5120 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: inteldrmfb frame buffer device [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_video0: <ACPI video extension> on vgapci0 [...] interface fusefs.1 already present in the KLD 'fuse.ko'! [...] linker_load_file: /boot/kernel/fusefs.ko - unsupported file type [...] ichwd0: <Intel Cougar Point watchdog timer> on isa0