[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p10 stable/24.1-n254984-f7b006edfa8 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 1024x768 [...] CPU: AMD Ryzen 5 5600G with Radeon Graphics (3892.80-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0xa50f00 Family=0x19 Model=0x50 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ef8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX> [...] Structured Extended Features=0x219c97a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA> [...] Structured Extended Features2=0x40069c<UMIP,PKU,OSPKE,VAES,VPCLMULQDQ,RDPID> [...] Structured Extended Features3=0x10<FSRM> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x191ef657<CLZERO,IRPerf,XSaveErPtr,RDPRU,WBNOINVD,IBPB,IBRS,STIBP,STIBP_ALWAYSON,PREFER_IBRS,SSBD> [...] SVM: (disabled in BIOS) NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 15940849664 (15202 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 1 7 6 5 4 8 9 2 11 3 10 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x9ca24000-0x9ca2401e [...] smbios0: Version: 3.3, BCD Revision: 3.3 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 2.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfc4a0000-0xfc4a7fff irq 36 at device 0.0 on pci1 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AHCI SATA controller> mem 0xfc480000-0xfc49ffff irq 37 at device 0.1 on pci1 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 38 at device 0.2 on pci1 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 36 at device 0.0 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] bce0: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xfa000000-0xfbffffff irq 36 at device 0.0 on pci3 [...] miibus0: <MII bus> on bce0 [...] brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce0: Using defaults for TSO: 65518/35/2048 [...] bce0: Ethernet address: ... [...] bce0: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (6.2.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] bce1: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xf8000000-0xf9ffffff irq 37 at device 0.1 on pci3 [...] miibus1: <MII bus> on bce1 [...] brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce1: Using defaults for TSO: 65518/35/2048 [...] bce1: Ethernet address: ... [...] bce1: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (6.2.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] pcib4: <ACPI PCI-PCI bridge> irq 38 at device 6.0 on pci2 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb0: <Intel(R) I210 (Copper)> port 0xe000-0xe01f mem 0xfc100000-0xfc1fffff,0xfc200000-0xfc203fff irq 38 at device 0.0 on pci4 [...] igb0: EEPROM V3.25-0 Option ROM V1-b924-p0 eTrack 0x800005cd [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 37 at device 9.0 on pci2 [...] pci5: <ACPI PCI bus> on pcib5 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfc304000-0xfc304fff,0xfc300000-0xfc303fff irq 37 at device 0.0 on pci5 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus2: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus2 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib6: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfc900000-0xfc97ffff irq 38 at device 0.0 on pci6 [...] vgapci0: Boot video device [...] hdac0: <ATI (0x1637) HDA Controller> mem 0xfc988000-0xfc98bfff irq 39 at device 0.1 on pci6 [...] pci6: <encrypt/decrypt> at device 0.2 (no driver attached) [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfc700000-0xfc7fffff irq 37 at device 0.3 on pci6 [...] xhci1: 64 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfc600000-0xfc6fffff irq 38 at device 0.4 on pci6 [...] xhci2: 64 bytes context size, 64-bit DMA [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] hdac1: <AMD Raven HDA Controller> mem 0xfc980000-0xfc987fff irq 36 at device 0.6 on pci6 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcd7ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1946343881 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] hdacc1: <Realtek ALC897 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Realtek ALC897 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm5: <Realtek ALC897 (Front Analog)> at nid 27 and 25 on hdaa1 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 870 QVO 1TB SVQ02B6Q> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 953869MB (1953525168 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ugen2.1: <AMD XHCI root HUB> at usbus2 [...] ugen1.1: <AMD XHCI root HUB> at usbus1 [...] uhub0 on usbus2 [...] uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub1 on usbus1 [...] uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] ugen0.1: <AMD XHCI root HUB> at usbus0 [...] uhub2 on usbus0 [...] uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: 6 ports with 6 removable, self powered [...] uhub1: 6 ports with 6 removable, self powered [...] uhub2: 14 ports with 14 removable, self powered [...] ugen0.2: <LITE-ON Technology USB NetVista Full Width Keyboard.> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <EP1 Interrupt> on usbus0 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus0 [...] usb_alloc_device: set address 3 failed (USB_ERR_IOERROR, ignored) [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR [...] Root mount waiting for: usbus0 [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_IOERROR, ignored) [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR [...] Root mount waiting for: usbus0 [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_IOERROR, ignored) [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_IOERROR, ignored) [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR [...] Root mount waiting for: usbus0 [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_IOERROR, ignored) [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR [...] ugen0.3: <Unknown > at usbus0 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] ugen0.3: <ITE Tech. Inc. ITE Device> at usbus0