[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p2 stable/25.1-n269670-fd3d1a7d1e1 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Celeron(R) CPU E3400 @ 2.60GHz (2600.09-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x1067a Family=0x6 Model=0x17 Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0xc00e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE,OSXSAVE> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: HLT,PAUSE [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8204816384 (7824 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <HPQOEM SLIC-CPC> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] ioapic0: MADT APIC ID 2 != hw id 0 [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xfa870-0xfa88e [...] smbios0: Version: 2.7 [...] aesni0: No AES or SHA support. [...] acpi0: <HPQOEM SLIC-CPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xbc00-0xbc07 mem 0xfe400000-0xfe7fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel 82801G HDA Controller> mem 0xfe3f8000-0xfe3fbfff irq 16 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe8ff000-0xfe8fffff irq 16 at device 0.0 on pci1 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 810xE PCIe 10/100baseTX> port 0xc800-0xc8ff mem 0xfe9ff000-0xfe9fffff,0xfdff0000-0xfdffffff irq 17 at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: turning off MSI enable bit. [...] re0: Chip rev. 0x24800000 [...] re0: MAC rev. 0x00400000 [...] miibus0: <MII bus> on re0 [...] rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0 [...] rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re1: <RealTek 8168 Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeaff000-0xfeafffff,0xfeaf8000-0xfeafbfff irq 18 at device 0.0 on pci3 [...] re1: Using 1 MSI-X message [...] re1: Chip rev. 0x54000000 [...] re1: MAC rev. 0x00100000 [...] miibus1: <MII bus> on re1 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pci4: <network> at device 0.0 (no driver attached) [...] uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xb880-0xb89f irq 23 at device 29.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus1 on uhci0 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xb800-0xb81f irq 19 at device 29.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus2 on uhci1 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xb480-0xb49f irq 18 at device 29.2 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus3 on uhci2 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xb400-0xb41f irq 16 at device 29.3 on pci0 [...] uhci3: LegSup = 0x2f00 [...] usbus4 on uhci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe3f7c00-0xfe3f7fff irq 23 at device 29.7 on pci0 [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci0 [...] usbus5: 480Mbps High Speed USB v2.0 [...] pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] atapci1: <Intel ICH7 SATA300 controller> port 0xb080-0xb087,0xb000-0xb003,0xac00-0xac07,0xa880-0xa883,0xa800-0xa80f irq 19 at device 31.2 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci1 [...] ata3: <ATA channel> at channel 1 on atapci1 [...] acpi_button0: <Power Button> on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcc7ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 6160d2506000d25 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 6160d2506000d25 [...] device_attach: est1 attach returned 6 [...] Timecounter "TSC-low" frequency 1300000225 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen3.1: <Intel UHCI root HUB> at usbus3 [...] ugen4.1: <Intel UHCI root HUB> at usbus4 [...] uhub0 on usbus3 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] uhub1 on usbus4 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] ugen5.1: <Intel EHCI root HUB> at usbus5 [...] uhub2 on usbus2 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub3 on usbus5 [...] uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] ugen0.1: <(0x1106) XHCI root HUB> at usbus0 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] uhub4 on usbus0 [...] uhub5 on usbus1 [...] uhub4: <(0x1106) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] hdacc0: <Realtek ALC662 rev1 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC662 rev1 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC662 rev1 (Analog)> at nid 20 and 24,25,26 on hdaa0 [...] pcm1: <Realtek ALC662 rev1 (Front Analog Headphones)> at nid 27 on hdaa0 [...] Trying to mount root from ufs:/dev/ada1s1a [rw]... [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub4: 5 ports with 4 removable, self powered [...] uhub5: 2 ports with 2 removable, self powered [...] ada0 at ata2 bus 0 scbus1 target 0 lun 0 [...] ada0: <Acer SSD SA100 960GB V0920A0> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 150.000MB/s transfers (SATA, UDMA5, PIO 512bytes) [...] ada0: 915715MB (1875385008 512 byte sectors) [...] ada1 at ata2 bus 0 scbus1 target 1 lun 0 [...] ada1: <HFS128G32TNF-N3A0A 70000P10> ACS-3 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) [...] ada1: 122104MB (250069680 512 byte sectors) [...] ada2 at ata3 bus 0 scbus2 target 0 lun 0 [...] ada2: <OV SSD 256GB S600 SN20049> ACS-4 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 150.000MB/s transfers (SATA, UDMA5, PIO 512bytes) [...] ada2: 244198MB (500118192 512 byte sectors) [...] ada3 at ata3 bus 0 scbus2 target 1 lun 0 [...] ada3: <Hitachi HUA722010CLA330 JP4OA3PA> ATA8-ACS SATA 2.x device [...] ada3: Serial Number... [...] ada3: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) [...] ada3: 953869MB (1953525168 512 byte sectors) [...] ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0 [...] uhub6 on uhub4 [...] uhub6: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.20, addr 1> on usbus0 [...] uhub6: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus5 [...] Root mount waiting for: usbus5 [...] Root mount waiting for:uhub3: 8 ports with 8 removable, self powered [...] usbus5 [...] Root mount waiting for: usbus5 [...] ugen1.2: <DELL DELL USB Keyboard> at usbus1 [...] ukbd0 on uhub5 [...] ukbd0: <DELL DELL USB Keyboard, class 0/0, rev 1.10/1.05, addr 2> on usbus1 [...] kbd2 at ukbd0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device USB SanDisk 3.2Gen1 (0x0781:0x5597) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device USB SanDisk 3.2Gen1 (0x0781:0x5597) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device USB SanDisk 3.2Gen1 (0x0781:0x5597) [...] Root mount waiting for: usbus5 [...] ugen5.2: <USB SanDisk 3.2Gen1> at usbus5 [...] umass0 on uhub3 [...] umass0: <USB SanDisk 3.2Gen1, class 0/0, rev 2.10/1.00, addr 2> on usbus5 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:3:0: Attached to scbus3 [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <USB SanDisk 3.2Gen1 1.00> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 29358MB (60125184 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] re0: link state changed to UP [...] re1: link state changed to UP [...] rtwn0: <Realtek RTL8188CE> port 0xe800-0xe8ff mem 0xfebfc000-0xfebfffff irq 19 at device 0.0 on pci4 [...] rtwn0: MAC/BB RTL8188CE, RF 6052 1T1R [...] ichsmb0: <Intel 82801GB (ICH7) SMBus controller> port 0x400-0x41f irq 19 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] re1: link state changed to DOWN [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re1: link state changed to UP [...] aesni0: No AES or SHA support. [...] qat_ocf0: <QAT engine> [...] wlan0: Ethernet address: ... [...] wlan0: changing name to 'rtwn0_wlan1' [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 done [...] All buffers synced. [...] Uptime: 24m50s [...] umass0: detached [...] uhub3: detached [...] uhub1: detached [...] uhub0: detached [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device USB SanDisk 3.2Gen1 (0x0781:0x5597) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device USB SanDisk 3.2Gen1 (0x0781:0x5597) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device USB SanDisk 3.2Gen1 (0x0781:0x5597) [...] ugen2.2: <USB SanDisk 3.2Gen1> at usbus2 [...] umass0 on uhub2 [...] umass0: <USB SanDisk 3.2Gen1, class 0/0, rev 2.10/1.00, addr 2> on usbus2 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:3:0: Attached to scbus3 [...] (da0:umass-sim0:0:0:0): got CAM status 0x444 [...] (da0:umass-sim0:0:0:0): fatal error, failed to attach to device [...] umass0: detached [...] uhub2: detached [...] ukbd0: detached [...] uhub5: detached [...] re1: link state changed to DOWN [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p2 stable/25.1-n269670-fd3d1a7d1e1 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(vga): resolution 640x480 [...] CPU microcode: updated from 0xa07 to 0xa0b [...] CPU: Intel(R) Celeron(R) CPU E3400 @ 2.60GHz (2600.13-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x1067a Family=0x6 Model=0x17 Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0xc00e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE,OSXSAVE> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: HLT,PAUSE [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8192196608 (7812 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <HPQOEM SLIC-CPC> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] ioapic0: MADT APIC ID 2 != hw id 0 [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xfa870-0xfa88e [...] smbios0: Version: 2.7 [...] aesni0: No AES or SHA support. [...] acpi0: <HPQOEM SLIC-CPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xbc00-0xbc07 mem 0xfe400000-0xfe7fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel 82801G HDA Controller> mem 0xfe3f8000-0xfe3fbfff irq 16 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe8ff000-0xfe8fffff irq 16 at device 0.0 on pci1 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <Realtek PCIe FE Family Controller> port 0xc800-0xc8ff mem 0xfe9ff000-0xfe9fffff,0xfdff0000-0xfdffffff irq 17 at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using line-based interrupt [...] re0: version:1.100.00 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re1: <Realtek PCIe GbE Family Controller> port 0xd800-0xd8ff mem 0xfeaff000-0xfeafffff,0xfeaf8000-0xfeafbfff irq 18 at device 0.0 on pci3 [...] re1: Using Memory Mapping! [...] re1: Using 1 MSI-X message [...] re1: version:1.100.00 [...] re1: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pci4: <network> at device 0.0 (no driver attached) [...] uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xb880-0xb89f irq 23 at device 29.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus1 on uhci0 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xb800-0xb81f irq 19 at device 29.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus2 on uhci1 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xb480-0xb49f irq 18 at device 29.2 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus3 on uhci2 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xb400-0xb41f irq 16 at device 29.3 on pci0 [...] uhci3: LegSup = 0x2f00 [...] usbus4 on uhci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe3f7c00-0xfe3f7fff irq 23 at device 29.7 on pci0 [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci0 [...] usbus5: 480Mbps High Speed USB v2.0 [...] pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] atapci1: <Intel ICH7 SATA300 controller> port 0xb080-0xb087,0xb000-0xb003,0xac00-0xac07,0xa880-0xa883,0xa800-0xa80f irq 19 at device 31.2 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci1 [...] ata3: <ATA channel> at channel 1 on atapci1 [...] acpi_button0: <Power Button> on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcc7ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 6160d2506000d25 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 6160d2506000d25 [...] device_attach: est1 attach returned 6 [...] Timecounter "TSC-low" frequency 1300000295 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] ugen5.1: <Intel EHCI root HUB> at usbus5 [...] uhub0 on usbus2 [...] uhub1 on usbus5 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] ugen4.1: <Intel UHCI root HUB> at usbus4 [...] ugen0.1: <(0x1106) XHCI root HUB> at usbus0 [...] uhub2 on usbus4 [...] uhub3 on usbus0 [...] uhub3: <(0x1106) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] ugen3.1: <Intel UHCI root HUB> at usbus3 [...] uhub4 on usbus1 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub5 on usbus3 [...] uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] hdacc0: <Realtek ALC662 rev1 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC662 rev1 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC662 rev1 (Analog)> at nid 20 and 24,25,26 on hdaa0 [...] pcm1: <Realtek ALC662 rev1 (Front Analog Headphones)> at nid 27 on hdaa0 [...] Trying to mount root from ufs:/dev/ada1s1a [rw]... [...] uhub0: 2 ports with 2 removable, self powered [...] uhub3: 5 ports with 4 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub4: 2 ports with 2 removable, self powered [...] uhub5: 2 ports with 2 removable, self powered [...] ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0 [...] uhub6 on uhub3 [...] uhub6: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.20, addr 1> on usbus0 [...] ada0 at ata2 bus 0 scbus1 target 0 lun 0 [...] ada0: <Acer SSD SA100 960GB V0920A0> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 150.000MB/s transfers (SATA, UDMA5, PIO 512bytes) [...] ada0: 915715MB (1875385008 512 byte sectors) [...] ada1 at ata2 bus 0 scbus1 target 1 lun 0 [...] ada1: <HFS128G32TNF-N3A0A 70000P10> ACS-3 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) [...] ada1: 122104MB (250069680 512 byte sectors) [...] ada2 at ata3 bus 0 scbus2 target 0 lun 0 [...] ada2: <OV SSD 256GB S600 SN20049> ACS-4 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 150.000MB/s transfers (SATA, UDMA5, PIO 512bytes) [...] ada2: 244198MB (500118192 512 byte sectors) [...] ada3 at ata3 bus 0 scbus2 target 1 lun 0 [...] ada3: <Hitachi HUA722010CLA330 JP4OA3PA> ATA8-ACS SATA 2.x device [...] ada3: Serial Number... [...] ada3: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) [...] ada3: 953869MB (1953525168 512 byte sectors) [...] uhub6: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus5 [...] Root mount waiting for: usbus5 [...] uhub1: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus5 [...] Root mount waiting for: usbus5 [...] ugen1.2: <DELL DELL USB Keyboard> at usbus1 [...] ukbd0 on uhub4 [...] ukbd0: <DELL DELL USB Keyboard, class 0/0, rev 1.10/1.05, addr 2> on usbus1 [...] kbd2 at ukbd0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device USB SanDisk 3.2Gen1 (0x0781:0x5597) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device USB SanDisk 3.2Gen1 (0x0781:0x5597) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device USB SanDisk 3.2Gen1 (0x0781:0x5597) [...] Root mount waiting for: usbus5 [...] ugen5.2: <USB SanDisk 3.2Gen1> at usbus5 [...] umass0 on uhub1 [...] umass0: <USB SanDisk 3.2Gen1, class 0/0, rev 2.10/1.00, addr 2> on usbus5 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:3:0: Attached to scbus3 [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <USB SanDisk 3.2Gen1 1.00> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 29358MB (60125184 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE>