[...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] All buffers synced. [...] Uptime: 4m57s [...] uhub2: detached [...] uhub1: detached [...] uhub3: detached [...] umass0: detached [...] uhub4: detached [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device SanDisk Extreme (0x0781:0x558b) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device SanDisk Extreme (0x0781:0x558b) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device SanDisk Extreme (0x0781:0x558b) [...] ugen2.2: <SanDisk Extreme> at usbus2 [...] umass0 on uhub6 [...] umass0: <SanDisk Extreme, class 0/0, rev 2.10/1.00, addr 2> on usbus2 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:6:0: Attached to scbus6 [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] uhub6: detached [...] uhub5: detached [...] ukbd0: detached [...] uhid0: detached [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RC6 releng/13.1-n250146-cd651fcc491 GENERIC amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1024x768 [...] CPU: AMD E-350 Processor (1600.04-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x500f10 Family=0x14 Model=0x1 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT> [...] SVM: NP,NRIP,NAsids=8 [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 4057784320 (3869 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796) [...] ioapic0: MADT APIC ID 0 != hw id 3 [...] ioapic0 <Version 2.1> irqs 0-23 [...] Launching APs: 1 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xddd3fc98-0xddd3fcb6 [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: No AES or SHA support. [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 450 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xfc000000-0xfdffffff,0xfeb00000-0xfeb3ffff irq 18 at device 1.0 on pci0 [...] vgapci0: Boot video device [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I210 (Copper)> mem 0xfe900000-0xfe9fffff,0xfea00000-0xfea03fff irq 16 at device 0.0 on pci1 [...] igb0: EEPROM V3.25-0 Option ROM V1-b654-p0 eTrack 0x8000060b [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf190-0xf197,0xf180-0xf183,0xf170-0xf177,0xf160-0xf163,0xf150-0xf15f mem 0xfeb47000-0xfeb473ff irq 19 at device 17.0 on pci0 [...] ahci0: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb46000-0xfeb46fff irq 18 at device 18.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb45000-0xfeb450ff irq 17 at device 18.2 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb44000-0xfeb44fff irq 18 at device 19.0 on pci0 [...] usbus2 on ohci1 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb43000-0xfeb430ff irq 17 at device 19.2 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci1 [...] usbus3: 480Mbps High Speed USB v2.0 [...] atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf100-0xf10f irq 17 at device 20.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ata1: <ATA channel> at channel 1 on atapci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb42000-0xfeb42fff irq 18 at device 20.5 on pci0 [...] usbus4 on ohci2 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb41000-0xfeb41fff irq 18 at device 22.0 on pci0 [...] usbus5 on ohci3 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb40000-0xfeb400ff irq 17 at device 22.2 on pci0 [...] usbus6: EHCI version 1.0 [...] usbus6 on ehci2 [...] usbus6: 480Mbps High Speed USB v2.0 [...] acpi_button0: <Power Button> on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xce800-0xcf7ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC" frequency 1599999480 Hz quality 800 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen2.1: <ATI OHCI root HUB> at usbus2 [...] ugen5.1: <ATI OHCI root HUB> at usbus5 [...] uhub0 on usbus2 [...] uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub1 on usbus5 [...] uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] ugen0.1: <ATI OHCI root HUB> at usbus0 [...] ugen3.1: <ATI EHCI root HUB> at usbus3 [...] uhub2 on usbus0 [...] uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub3 on usbus3 [...] ugen6.1: <ATI EHCI root HUB> at usbus6 [...] uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub4 on usbus6 [...] uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 [...] ugen1.1: <ATI EHCI root HUB> at usbus1 [...] ugen4.1: <ATI OHCI root HUB> at usbus4 [...] uhub5 on usbus1 [...] uhub6 on usbus4 [...] uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub1: 4 ports with 4 removable, self powered [...] uhub0: 5 ports with 5 removable, self powered [...] uhub6: 2 ports with 2 removable, self powered [...] uhub2: 5 ports with 5 removable, self powered [...] Root mount waiting for: CAM usbus1 usbus3 usbus6 [...] uhub4: 4 ports with 4 removable, self powered [...] uhub3: 5 ports with 5 removable, self powered [...] uhub5: 5 ports with 5 removable, self powered [...] Root mount waiting for: CAM [...] ugen0.2: <vendor 0x1017 Gaming Keyboard> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <vendor 0x1017 Gaming Keyboard, class 0/0, rev 1.10/1.02, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] Root mount waiting for: CAM [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <Hitachi HDS724040ALE640 MJAOA3B0> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 3815447MB (7814037168 512 byte sectors) [...] ada1 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada1: <Patriot Burst SBFM61.3> ACS-4 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 114473MB (234441648 512 byte sectors) [...] GEOM: ada0: the primary GPT table is corrupt or invalid. [...] GEOM: ada0: using the secondary instead -- recovery strongly advised. [...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] lo0: link state changed to UP [...] uhid0 on uhub2 [...] uhid0: <vendor 0x1017 Gaming Keyboard, class 0/0, rev 1.10/1.02, addr 2> on usbus0 [...] igb0: link state changed to UP