[...] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [...] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [...] 2018, 2019, 2020, 2021, 2022 [...] The NetBSD Foundation, Inc. All rights reserved. [...] Copyright (c) 1982, 1986, 1989, 1991, 1993 [...] The Regents of the University of California. All rights reserved. [...] [...] NetBSD 9.3 (MACBOOK) #2: Fri Sep 15 20:03:46 CEST 2023 [...] XXX@XXX:/usr/src/sys/arch/amd64/compile/MACBOOK [...] total memory = 8100 MB [...] avail memory = 7830 MB [...] cpu_rng: RDRAND [...] rnd: seeded with 256 bits [...] timecounter: Timecounters tick every 10.000 msec [...] Kernelized RAIDframe activated [...] running cgd selftest aes-xts-256 aes-xts-512 done [...] RTC BIOS diagnostic error 0xff<clock_battery,ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time> [...] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 [...] efi: systbl at pa 8ae8ee10 [...] Apple Inc. MacBookPro11,1 (1.0) [...] mainbus0 (root) [...] ACPI: RSDP 0x000000008AD8E014 000024 (v02 APPLE ) [...] ACPI: XSDT 0x000000008AD8E1C0 0000A4 (v01 APPLE Apple00 00000000 01000013) [...] ACPI: FACP 0x000000008AD8C000 0000F4 (v05 APPLE Apple00 00000000 Loki 0000005F) [...] ACPI: DSDT 0x000000008AD7F000 007681 (v03 APPLE MacBookP 00110001 INTL 20100915) [...] ACPI: FACS 0x000000008AD18000 000040 [...] ACPI: HPET 0x000000008AD8B000 000038 (v01 APPLE Apple00 00000001 Loki 0000005F) [...] ACPI: APIC 0x000000008AD8A000 0000BC (v02 APPLE Apple00 00000001 Loki 0000005F) [...] ACPI: SBST 0x000000008AD88000 000030 (v01 APPLE Apple00 00000001 Loki 0000005F) [...] ACPI: ECDT 0x000000008AD87000 000053 (v01 APPLE Apple00 00000001 Loki 0000005F) [...] ACPI: SSDT 0x000000008AD7E000 00010B (v01 APPLE SataAhci 00001000 INTL 20100915) [...] ACPI: SSDT 0x000000008AD7D000 000024 (v01 APPLE SmcDppt 00001000 INTL 20100915) [...] ACPI: SSDT 0x000000008AD7A000 000FE9 (v01 APPLE SDUsbLpt 00001000 INTL 20100915) [...] ACPI: SSDT 0x000000008AD76000 000032 (v01 APPLE SsdtS3 00001000 INTL 20100915) [...] ACPI: SSDT 0x000000008AD73000 0028B2 (v01 APPLE PcieTbt 00001000 INTL 20100915) [...] ACPI: SSDT 0x000000008AD66000 0000B8 (v01 APPLE Sdxc 00001000 INTL 20100915) [...] ACPI: SSDT 0x000000008AD65000 0003E0 (v01 APPLE SaHdaCdc 00001000 INTL 20100915) [...] ACPI: SSDT 0x000000008AD64000 0005F7 (v01 PmRef Cpu0Ist 00003000 INTL 20100915) [...] ACPI: SSDT 0x000000008AD63000 000B83 (v01 PmRef CpuPm 00003000 INTL 20100915) [...] ACPI: DMAR 0x000000008AD62000 000088 (v01 APPLE HSW 00000001 AAPL 00000001) [...] ACPI: MCFG 0x000000008AD89000 00003C (v01 APPLE Apple00 00000001 Loki 0000005F) [...] ACPI: 10 ACPI AML tables successfully acquired and loaded [...] ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 40 pins [...] cpu0 at mainbus0 apid 0 [...] cpu0: Intel(R) Core(TM) i5-4308U CPU @ 2.80GHz, id 0x40651 [...] cpu0: package 0, core 0, smt 0 [...] cpu1 at mainbus0 apid 2 [...] cpu1: Intel(R) Core(TM) i5-4308U CPU @ 2.80GHz, id 0x40651 [...] cpu1: package 0, core 1, smt 0 [...] cpu2 at mainbus0 apid 1 [...] cpu2: Intel(R) Core(TM) i5-4308U CPU @ 2.80GHz, id 0x40651 [...] cpu2: package 0, core 0, smt 1 [...] cpu3 at mainbus0 apid 3 [...] cpu3: Intel(R) Core(TM) i5-4308U CPU @ 2.80GHz, id 0x40651 [...] cpu3: package 0, core 1, smt 1 [...] acpi0 at mainbus0: Intel ACPICA 20190405 [...] acpi0: X/RSDT: OemId <APPLE , Apple00,00000000>, AslId < ,01000013> [...] acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT [...] acpi0: MCFG: segment 0, bus 0-155, address 0x00000000e0000000 [...] ACPI Error: Needed type [Reference], found [Integer] 0xfffffd9a29ba5e78 (20190405/exresop-114) [...] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20190405/dswexec-500) [...] ACPI Error: Aborting method \_PR.CPU0._PDC due to previous error (AE_AML_OPERAND_TYPE) (20190405/psparse-581) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFFD9B877EC808 00067C (v01 PmRef ApIst 00003000 INTL 20100915) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFFD9A29B74108 000119 (v01 PmRef ApCst 00003000 INTL 20100915) [...] acpi0: SCI interrupting at int 9 [...] acpi0: fixed power button present [...] timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 [...] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) [...] timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000 [...] acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0 [...] acpivga0 at acpi0 (IGPU): ACPI Display Adapter [...] acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device [...] acpiout0: brightness levels: [0-100] [...] acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device [...] acpiout2 at acpivga0 (DD03, 0x0200): ACPI Display Output Device [...] acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device [...] acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device [...] acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device [...] acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device [...] acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device [...] acpiout8 at acpivga0 (DD1F, 0x001f): ACPI Display Output Device [...] acpivga0: connected output devices: [...] acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0 [...] FWHD (INT0800) at acpi0 not configured [...] LDRC (PNP0C02) at acpi0 not configured [...] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 [...] SMC (APP0001) at acpi0 not configured [...] ALS0 (ACPI0008) at acpi0 not configured [...] SBS0 (ACPI0002) at acpi0 not configured [...] PDRC (PNP0C02) at acpi0 not configured [...] MEM2 (PNP0C01) at acpi0 not configured [...] acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery [...] acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter [...] acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch [...] acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button [...] PNLF (APP0002) at acpi0 not configured [...] acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button [...] ACPI: Enabled 2 GPEs in block 00 to 7F [...] pci0 at mainbus0 bus 0: configuration mode 1 [...] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [...] pchb0 at pci0 dev 0 function 0: vendor 8086 product 0a04 (rev. 0x09) [...] i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 0a2e (rev. 0x09) [...] hdaudio0 at pci0 dev 3 function 0: HD Audio Controller [...] hdaudio0: interrupting at msi0 vec 0 [...] hdaudio0: autoconfiguration error: RIRB timeout [...] hdaudio0: autoconfiguration error: RIRB timeout [...] xhci0 at pci0 dev 20 function 0: vendor 8086 product 9c31 (rev. 0x04) [...] xhci0: interrupting at msi1 vec 0 [...] xhci0: xHCI version 1.0 [...] usb0 at xhci0: USB revision 3.0 [...] usb1 at xhci0: USB revision 2.0 [...] vendor 8086 product 9c3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured [...] hdaudio1 at pci0 dev 27 function 0: HD Audio Controller [...] hdaudio1: interrupting at msi2 vec 0 [...] hdafg0 at hdaudio1: vendor 1013 product 4208 [...] hdafg0: DAC00 4ch: Speaker [Built-In] [...] hdafg0: DAC01 2ch: HP Out [Jack] [...] hdafg0: DIG02 2ch: SPDIF Out [Jack] [...] hdafg0: ADC03 2ch: Mic In [Jack] [...] hdafg0: 4ch/2ch 48000Hz PCM16* [...] audio0 at hdafg0: playback, capture, full duplex, independent [...] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback [...] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording [...] spkr0 at audio0: PC Speaker (synthesized) [...] wsbell at spkr0 not configured [...] ppb0 at pci0 dev 28 function 0: vendor 8086 product 9c10 (rev. 0xe4) [...] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s [...] pci1 at ppb0 bus 1 [...] pci1: i/o space, memory space enabled, rd/line, wr/inv ok [...] ppb1 at pci0 dev 28 function 1: vendor 8086 product 9c12 (rev. 0xe4) [...] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s [...] pci2 at ppb1 bus 2 [...] pci2: i/o space, memory space enabled, rd/line, wr/inv ok [...] vendor 14e4 product 1570 (miscellaneous multimedia) at pci2 dev 0 function 0 not configured [...] ppb2 at pci0 dev 28 function 2: vendor 8086 product 9c14 (rev. 0xe4) [...] ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s [...] ppb2: link is x1 @ 2.5GT/s [...] pci3 at ppb2 bus 3 [...] pci3: i/o space, memory space enabled, rd/line, wr/inv ok [...] vendor 14e4 product 43a0 (miscellaneous network, revision 0x03) at pci3 dev 0 function 0 not configured [...] ppb3 at pci0 dev 28 function 4: vendor 8086 product 9c18 (rev. 0xe4) [...] ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s [...] pci4 at ppb3 bus 5 [...] pci4: i/o space, memory space enabled, rd/line, wr/inv ok [...] ppb4 at pci4 dev 0 function 0: vendor 8086 product 156d (rev. 0x00) [...] ppb4: PCI Express capability version 2 <Upstream Port of PCI-E Switch> [...] pci5 at ppb4 bus 6 [...] pci5: i/o space, memory space enabled, rd/line, wr/inv ok [...] ppb5 at pci5 dev 0 function 0: vendor 8086 product 156d (rev. 0x00) [...] ppb5: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s [...] pci6 at ppb5 bus 7 [...] pci6: i/o space, memory space enabled, rd/line, wr/inv ok [...] vendor 8086 product 156c (miscellaneous system) at pci6 dev 0 function 0 not configured [...] ppb6 at pci5 dev 3 function 0: vendor 8086 product 156d (rev. 0x00) [...] ppb6: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s [...] pci7 at ppb6 bus 8 [...] pci7: i/o space, memory space enabled, rd/line, wr/inv ok [...] ppb7 at pci7 dev 0 function 0: vendor 8086 product 1549 (rev. 0x00) [...] ppb7: PCI Express capability version 2 <Upstream Port of PCI-E Switch> [...] pci8 at ppb7 bus 9 [...] pci8: i/o space, memory space enabled, rd/line, wr/inv ok [...] ppb8 at pci8 dev 0 function 0: vendor 8086 product 1549 (rev. 0x00) [...] ppb8: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x4 @ 5.0GT/s [...] ppb8: link is x1 @ 2.5GT/s [...] pci9 at ppb8 bus 10 [...] pci9: i/o space, memory space enabled, rd/line, wr/inv ok [...] bge0 at pci9 dev 0 function 0: Broadcom BCM57762 Gigabit Ethernet [...] bge0: interrupting at msix3 vec 0 [...] bge0: HW config 00091054, 00006014, 00002838, 00000000 00000000 [...] bge0: ASIC BCM57766 A0 (0x57766000), Ethernet address XXX [...] bge0: setting short Tx thresholds [...] brgphy0 at bge0 phy 1: BCM57765 1000BASE-T media interface, rev. 0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [...] ppb9 at pci5 dev 4 function 0: vendor 8086 product 156d (rev. 0x00) [...] ppb9: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s [...] pci10 at ppb9 bus 57 [...] pci10: i/o space, memory space enabled, rd/line, wr/inv ok [...] ppb10 at pci5 dev 5 function 0: vendor 8086 product 156d (rev. 0x00) [...] ppb10: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s [...] pci11 at ppb10 bus 58 [...] pci11: i/o space, memory space enabled, rd/line, wr/inv ok [...] ppb11 at pci5 dev 6 function 0: vendor 8086 product 156d (rev. 0x00) [...] ppb11: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s [...] pci12 at ppb11 bus 107 [...] pci12: i/o space, memory space enabled, rd/line, wr/inv ok [...] ppb12 at pci0 dev 28 function 5: vendor 8086 product 9c1a (rev. 0xe4) [...] ppb12: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s [...] ppb12: link is x2 @ 5.0GT/s [...] pci13 at ppb12 bus 4 [...] pci13: i/o space, memory space enabled, rd/line, wr/inv ok [...] ahcisata0 at pci13 dev 0 function 0: vendor 144d product 1600 (rev. 0x01) [...] ahcisata0: 64-bit DMA [...] ahcisata0: AHCI revision 1.30, 1 port, 32 slots, CAP 0xc3349f80<CCCS,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SNCQ,S64A> [...] ahcisata0: interrupting at msi4 vec 0 [...] atabus0 at ahcisata0 channel 0 [...] pcib0 at pci0 dev 31 function 0: vendor 8086 product 9c43 (rev. 0x04) [...] ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 9c22 (rev. 0x04) [...] ichsmb0: interrupting at ioapic0 pin 18 [...] iic0 at ichsmb0: I2C bus [...] isa0 at pcib0 [...] com0 at isa0 port 0x3f8-0x3ff irq 4: ns8250 or ns16450, no fifo [...] pcppi0 at isa0 port 0x61 [...] spkr1 at pcppi0: PC Speaker [...] wsbell at spkr1 not configured [...] midi0 at pcppi0: PC speaker [...] sysbeep0 at pcppi0 [...] attimer1: attached to pcppi0 [...] acpicpu0 at cpu0: ACPI CPU [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFFD9A2A13A808 0004F0 (v01 PmRef Cpu0Cst 00003001 INTL 20100915) [...] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW [...] acpicpu0: C2: FFH, lat 148 us, pow 200 mW [...] acpicpu0: C3: FFH, lat 506 us, pow 200 mW [...] acpicpu0: P0: FFH, lat 10 us, pow 28000 mW, 2801 MHz, turbo boost [...] acpicpu0: P1: FFH, lat 10 us, pow 28000 mW, 2800 MHz [...] acpicpu0: P2: FFH, lat 10 us, pow 26574 mW, 2700 MHz [...] acpicpu0: P3: FFH, lat 10 us, pow 22727 mW, 2400 MHz [...] acpicpu0: P4: FFH, lat 10 us, pow 20375 mW, 2200 MHz [...] acpicpu0: P5: FFH, lat 10 us, pow 18112 mW, 2000 MHz [...] acpicpu0: P6: FFH, lat 10 us, pow 14765 mW, 1700 MHz [...] acpicpu0: P7: FFH, lat 10 us, pow 12727 mW, 1500 MHz [...] acpicpu0: P8: FFH, lat 10 us, pow 10776 mW, 1300 MHz [...] acpicpu0: P9: FFH, lat 10 us, pow 8912 mW, 1100 MHz [...] acpicpu0: P10: FFH, lat 10 us, pow 7129 mW, 900 MHz [...] acpicpu0: P11: FFH, lat 10 us, pow 5428 mW, 756 MHz [...] acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 % [...] acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 % [...] acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 % [...] acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 % [...] acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 % [...] acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 % [...] acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 % [...] acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 % [...] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100 [...] acpicpu1 at cpu1: ACPI CPU [...] coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100 [...] acpicpu2 at cpu2: ACPI CPU [...] acpicpu3 at cpu3: ACPI CPU [...] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [...] timecounter: Timecounter "TSC" frequency 2800133880 Hz quality 3000 [...] acpiacad0: AC adapter online. [...] uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0 [...] uhub0: 4 ports with 4 removable, self powered [...] uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0 [...] uhub1: 9 ports with 9 removable, self powered [...] IPsec: Initialized Security Association Processing. [...] ahcisata0 port 0: device present, speed: 6.0Gb/s [...] umass0 at uhub0 port 3 configuration 1 interface 0 [...] umass0: Apple (0x5ac) Card Reader (0x8406), rev 3.00/8.20, addr 1 [...] umass0: using SCSI over Bulk-Only [...] scsibus0 at umass0: 2 targets, 1 lun per target [...] sd0 at scsibus0 target 0 lun 0: <APPLE, SD Card Reader, 3.00> disk removable [...] sd0: drive offline [...] uhub2 at uhub1 port 3: Apple Inc. (0xa5c) BRCM20702 Hub (0x4500), class 9/0, rev 2.00/1.00, addr 2 [...] uhub2: 3 ports with 0 removable, self powered [...] wd0 at atabus0 drive 0 [...] wd0: <APPLE SSD SM0512F> [...] wd0: drive supports 16-sector PIO transfers, LBA48 addressing [...] wd0: 465 GB, 969350 cyl, 16 head, 63 sec, 512 bytes/sect x 977105060 sectors (0 bytes/physsect; first aligned sector: 8) [...] wd0: GPT GUID: HASH_4E4-D78B-0A84-46D3-FE5500D4A74D [...] dk0 at wd0: "EFI System Partition", 409600 blocks at 40, type: msdos [...] dk1 at wd0: "MacOS", 249099576 blocks at 411648, type: <unknown> [...] dk2 at wd0: "NetBSD", 106305536 blocks at 249511936, type: ffs [...] dk3 at wd0: "Arch", 604901376 blocks at 355817472, type: ext2fs [...] dk4 at wd0: "Swap", 16386048 blocks at 960718848, type: <unknown> [...] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) [...] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) [...] uhidev0 at uhub2 port 1 configuration 1 interface 0 [...] uhidev0: vendor 05ac (0x5ac) product 820a (0x820a), rev 2.00/1.00, addr 3, iclass 3/1 [...] uhidev0: 1 report ids [...] ukbd0 at uhidev0 reportid 1 [...] wskbd0 at ukbd0: console keyboard [...] uhidev1 at uhub2 port 2 configuration 1 interface 0 [...] uhidev1: vendor 05ac (0x5ac) product 820b (0x820b), rev 2.00/1.00, addr 4, iclass 3/1 [...] uhidev1: 2 report ids [...] ums0 at uhidev1 reportid 2: 3 buttons [...] wsmouse0 at ums0 mux 0 [...] ubt0 at uhub2 port 3 [...] ubt0: Apple Inc. (0x5ac) Bluetooth USB Host Controller (0x8289), rev 2.00/1.50, addr 5 [...] uhidev2 at uhub1 port 5 configuration 1 interface 0 [...] uhidev2: Apple Inc. (0x5ac) Apple Internal Keyboard / Trackpad (0x25a), rev 2.00/2.24, addr 6, iclass 3/1 [...] uhidev2: 9 report ids [...] ukbd1 at uhidev2 reportid 1 [...] wskbd1 at ukbd1 mux 1 [...] uhid0 at uhidev2 reportid 9: input=0, output=0, feature=3 [...] uhidev3 at uhub1 port 5 configuration 1 interface 1 [...] uhidev3: Apple Inc. (0x5ac) Apple Internal Keyboard / Trackpad (0x25a), rev 2.00/2.24, addr 6, iclass 3/0 [...] uhidev3: 68 report ids [...] uhid1 at uhidev3 reportid 68: input=511, output=0, feature=0 [...] uhidev4 at uhub1 port 5 configuration 1 interface 2 [...] uhidev4: Apple Inc. (0x5ac) Apple Internal Keyboard / Trackpad (0x25a), rev 2.00/2.24, addr 6, iclass 3/1 [...] uhidev4: 2 report ids [...] ums1 at uhidev4 reportid 2: 3 buttons [...] wsmouse1 at ums1 mux 0 [...] WARNING: 2 errors while detecting hardware; check system log. [...] boot device: wd0 [...] root on dk2 [...] root file system type: ffs [...] kern.module.path=/stand/amd64/9.3/modules [...] kern info: [drm] Memory usable by graphics device = 2048M [...] kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] kern info: [drm] Driver supports precise vblank timestamp query. [...] kern info: [drm] failed to find VBIOS tables [...] i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0) [...] intelfb0 at i915drmkms0 [...] intelfb0: framebuffer at 0xffffad80af823000, size 2560x1600, depth 32, stride 10240 [...] wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0 [...] wsmux1: connecting to wsdisplay0 [...] wskbd1: connecting to wsdisplay0 [...] wsdisplay0: screen 1 added (default, vt100 emulation) [...] wsdisplay0: screen 2 added (default, vt100 emulation) [...] wsdisplay0: screen 3 added (default, vt100 emulation) [...] wsdisplay0: screen 4 added (default, vt100 emulation)