Probe #17853848cd of AAEON FWS-2251 V1.0 Desktop Computer (FWS-2251)
Log: dmesg
[...] Copyright (c) 668B-5668 The FreeBSD Project.
[...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[...] The Regents of the University of California. All rights reserved.
[...] FreeBSD is a registered trademark of The FreeBSD Foundation.
[...] FreeBSD 13.2-RELEASE-p9 stable/24.1-n254969-8659880248c SMP amd64
[...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c)
[...] VT(efifb): resolution 800x600
[...] CPU: Intel(R) Atom(TM) CPU E3815 @ 1.46GHz (1466.73-MHz K8-class CPU)
[...] Origin="GenuineIntel" Id=0x30679 Family=0x6 Model=0x37 Stepping=9
[...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
[...] Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
[...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
[...] AMD Features2=0x101<LAHF,Prefetch>
[...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
[...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
[...] TSC: P-state invariant, performance statistics
[...] real memory = 4294967296 (4096 MB)
[...] avail memory = 3988643840 (3803 MB)
[...] Event timer "LAPIC" quality 600
[...] ACPI APIC Table: <ALASKA A M I >
[...] random: registering fast source Intel Secure Key RNG
[...] random: fast provider: "Intel Secure Key RNG"
[...] random: unblocking device.
[...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20201113/tbfadt-748)
[...] ioapic0 <Version 2.0> irqs 0-86
[...] wlan: mac acl policy registered
[...] random: entropy device external interface
[...] kbd1 at kbdmux0
[...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
[...] efirtc0: <EFI Realtime Clock>
[...] efirtc0: registered as a time-of-day clock, resolution 1.000000s
[...] smbios0: <System Management BIOS> at iomem 0xf0560-0xf057e
[...] smbios0: Version: 2.8, BCD Revision: 2.7
[...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
[...] acpi0: <ALASKA A M I >
[...] acpi0: Power Button (fixed)
[...] unknown: I/O range not supported
[...] cpu0: <ACPI CPU> on acpi0
[...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
[...] atrtc0: Warning: Couldn't map I/O.
[...] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[...] Event timer "RTC" frequency 32768 Hz quality 0
[...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
[...] Timecounter "HPET" frequency 14318180 Hz quality 950
[...] Event timer "HPET" frequency 14318180 Hz quality 450
[...] Event timer "HPET1" frequency 14318180 Hz quality 440
[...] Event timer "HPET2" frequency 14318180 Hz quality 440
[...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
[...] Timecounter "i8254" frequency 1193182 Hz quality 0
[...] Event timer "i8254" frequency 1193182 Hz quality 100
[...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
[...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[...] pcib0: Length mismatch for 3 range: 10b15fff vs 10b16000
[...] pci0: <ACPI PCI bus> on pcib0
[...] vgapci0: <VGA-compatible display> port 0xe080-0xe087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
[...] vgapci0: Boot video device
[...] ahci0: <AHCI SATA controller> port 0xe070-0xe077,0xe060-0xe063,0xe050-0xe057,0xe040-0xe043,0xe020-0xe03f mem 0xd0b15000-0xd0b157ff irq 19 at device 19.0 on pci0
[...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported
[...] ahcich1: <AHCI channel> at channel 1 on ahci0
[...] xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0b00000-0xd0b0ffff irq 20 at device 20.0 on pci0
[...] xhci0: 32 bytes context size, 64-bit DMA
[...] xhci0: Port routing mask set to 0xffffffff
[...] usbus0 on xhci0
[...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached)
[...] hdac0: <Intel BayTrail HDA Controller> mem 0xd0b10000-0xd0b13fff irq 22 at device 27.0 on pci0
[...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
[...] pci1: <ACPI PCI bus> on pcib1
[...] igb0: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0xd0a00000-0xd0a1ffff,0xd0a20000-0xd0a23fff irq 16 at device 0.0 on pci1
[...] igb0: NVM V0.6 imgtype1
[...] igb0: Using 1024 TX descriptors and 1024 RX descriptors
[...] igb0: Using 1 RX queues 1 TX queues
[...] igb0: Using MSI-X interrupts with 2 vectors
[...] igb0: Ethernet address: ...
[...] igb0: netmap queues/slots: TX 1/1024, RX 1/1024
[...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
[...] pci2: <ACPI PCI bus> on pcib2
[...] igb1: <Intel(R) I211 (Copper)> port 0xc000-0xc01f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff irq 17 at device 0.0 on pci2
[...] igb1: NVM V0.6 imgtype1
[...] igb1: Using 1024 TX descriptors and 1024 RX descriptors
[...] igb1: Using 1 RX queues 1 TX queues
[...] igb1: Using MSI-X interrupts with 2 vectors
[...] igb1: Ethernet address: ...
[...] igb1: netmap queues/slots: TX 1/1024, RX 1/1024
[...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
[...] pci3: <ACPI PCI bus> on pcib3
[...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
[...] pci4: <ACPI PCI bus> on pcib4
[...] pcib5: <ACPI PCI-PCI bridge> mem 0xd0800000-0xd0803fff irq 19 at device 0.0 on pci4
[...] pci5: <ACPI PCI bus> on pcib5
[...] pcib6: <PCI-PCI bridge> irq 16 at device 1.0 on pci5
[...] pci6: <PCI bus> on pcib6
[...] igb2: <Intel(R) I211 (Copper)> port 0xb000-0xb01f mem 0xd0700000-0xd071ffff,0xd0720000-0xd0723fff irq 16 at device 0.0 on pci6
[...] igb2: NVM V0.6 imgtype1
[...] igb2: Using 1024 TX descriptors and 1024 RX descriptors
[...] igb2: Using 1 RX queues 1 TX queues
[...] igb2: Using MSI-X interrupts with 2 vectors
[...] igb2: Ethernet address: ...
[...] igb2: netmap queues/slots: TX 1/1024, RX 1/1024
[...] pcib7: <PCI-PCI bridge> irq 17 at device 2.0 on pci5
[...] pci7: <PCI bus> on pcib7
[...] ath0: <Atheros AR946x/AR948x> mem 0xd0600000-0xd067ffff irq 17 at device 0.0 on pci7
[...] ar9300_flash_map: unimplemented for now
[...] Restoring Cal data from DRAM
[...] Restoring Cal data from EEPROM
[...] Restoring Cal data from Flash
[...] Restoring Cal data from Flash
[...] Restoring Cal data from OTP
[...] ar9300_hw_attach: ar9300_eeprom_attach returned 0
[...] ath0: [HT] enabling HT modes
[...] ath0: [HT] enabling short-GI in 20MHz mode
[...] ath0: [HT] 1 stream STBC receive enabled
[...] ath0: [HT] 1 stream STBC transmit enabled
[...] ath0: [HT] LDPC transmit/receive enabled
[...] ath0: [HT] 2 RX streams; 2 TX streams
[...] ath0: AR9460 mac 640.2 RF5110 phy 970.9
[...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
[...] pcib8: <PCI-PCI bridge> irq 18 at device 3.0 on pci5
[...] pci8: <PCI bus> on pcib8
[...] isab0: <PCI-ISA bridge> at device 31.0 on pci0
[...] isa0: <ISA bus> on isab0
[...] acpi_button0: <Sleep Button> on acpi0
[...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
[...] atkbd0: <AT Keyboard> irq 1 on atkbdc0
[...] kbd0 at atkbd0
[...] atkbd0: [GIANT-LOCKED]
[...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
[...] uart0: console (115200,n,8,1)
[...] est0: <Enhanced SpeedStep Frequency Control> on cpu0
[...] Timecounter "TSC" frequency 1466666389 Hz quality 1000
[...] Timecounters tick every 1.000 msec
[...] usbus0: 5.0Gbps Super Speed USB v3.0
[...] hdacc0: <Intel Valleyview2 HDA CODEC> at cad 2 on hdac0
[...] hdaa0: <Intel Valleyview2 Audio Function Group> at nid 1 on hdacc0
[...] pcm0: <Intel Valleyview2 (HDMI/DP 8ch)> at nid 4 on hdaa0
[...] pcm1: <Intel Valleyview2 (HDMI/DP 8ch)> at nid 5 on hdaa0
[...] ugen0.1: <Intel XHCI root HUB> at usbus0
[...] uhub0 on usbus0
[...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]...
[...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0
[...] ada0: <InnoDisk Corp. - mSATA 3ME3 S15A19> ATA8-ACS SATA 3.x device
[...] ada0: Serial Number...
[...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
[...] ada0: Command Queueing enabled
[...] ada0: 7641MB (15649200 512 byte sectors)
[...] uhub0: 7 ports with 7 removable, self powered
[...] ugen0.2: <Lenovo F5521gw> at usbus0
[...] umodem0 on uhub0
[...] umodem0: <F5521gw Mobile Broadband Modem> on usbus0
[...] umodem0: data interface 2, has CM over data, has break
[...] umodem1 on uhub0
[...] umodem1: <F5521gw Mobile Broadband Data Modem> on usbus0
[...] umodem1: data interface 4, has CM over data, has break
[...] umodem2 on uhub0
[...] umodem2: <F5521gw Mobile Broadband GPS Port> on usbus0
[...] umodem2: data interface 10, has CM over data, has break
[...] Root mount waiting for: usbus0
[...] ugen0.3: <vendor 0x0cf3 product 0x3004> at usbus0
[...] ugen0.4: <Logitech USB Receiver> at usbus0
[...] ukbd0 on uhub0
[...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.11, addr 3> on usbus0
[...] kbd2 at ukbd0
[...] Dual Console: Video Primary, Serial Secondary