[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE releng/14.1-n267679-10e31f0946d8 GENERIC amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Celeron(R) N5105 @ 2.00GHz (1996.80-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906c0 Family=0x6 Model=0x9c Stepping=0 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2394a2c3<FSGSBASE,TSCADJ,FDPEXC,SMEP,ERMS,NFPUSG,PQE,RDSEED,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x18400124<UMIP,WAITPKG,GFNI,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8018571264 (7647 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 2 3 1 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x74c78000-0x74c7801e [...] smbios0: Version: 3.3, BCD Revision: 3.3 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] ACPI Error: No handler for Region [ECF2] (0xfffff80001974200) [EmbeddedControl] (20221020/evregion-292) [...] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20221020/exfldio-428) [...] ACPI Error: Aborting method \134_SB.PC00.LPCB.H_EC.BAT0._STA due to previous error (AE_NOT_EXIST) (20221020/psparse-689) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0x6001000000-0x6001ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x6002100000-0x600210ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <serial bus> at device 21.1 (no driver attached) [...] pci0: <serial bus> at device 21.2 (no driver attached) [...] pci0: <serial bus> at device 21.3 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x5090-0x5097,0x5080-0x5083,0x5060-0x507f mem 0x7fe00000-0x7fe01fff,0x7fe03000-0x7fe030ff,0x7fe02000-0x7fe027ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pci0: <serial bus> at device 25.0 (no driver attached) [...] pci0: <serial bus> at device 25.1 (no driver attached) [...] sdhci_pci0: <Generic SD HCI> mem 0x6002129000-0x6002129fff at device 26.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <network> at device 0.0 (no driver attached) [...] pcib2: <ACPI PCI-PCI bridge> at device 28.5 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0x7fc00000-0x7fc00fff,0x6000000000-0x6000003fff at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x2c800000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pci0: <simple comms> at device 30.0 (no driver attached) [...] pci0: <serial bus> at device 30.3 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Jasper Lake HDA Controller> mem 0x6002120000-0x6002123fff,0x6002000000-0x60020fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] acpi_acad1: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC" frequency 1996803807 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mmc0: No compatible cards found on bus [...] hdacc0: <Intel Jasper Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa0: <Intel Jasper Lake Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Jasper Lake (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] Trying to mount root from ufs:/dev/ada0p2 [rw]... [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <NGFF 2280 128GB SSD V0414A0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] uhub0: 14 ports with 14 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <SINOWEALTH Game Mouse> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <SINOWEALTH Game Mouse, class 0/0, rev 1.10/1.00, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.3: <Logitech USB Keyboard> at usbus0 [...] ukbd1 on uhub0 [...] ukbd1: <Logitech USB Keyboard, class 0/0, rev 1.10/86.00, addr 2> on usbus0 [...] kbd3 at ukbd1 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device JetFlash Mass Storage Device (0x8564:0x1000) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device JetFlash Mass Storage Device (0x8564:0x1000) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device JetFlash Mass Storage Device (0x8564:0x1000) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device JetFlash Mass Storage Device (0x8564:0x1000) [...] ugen0.4: <JetFlash Mass Storage Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/1.00, addr 3> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc101 [...] umass0:2:0: Attached to scbus2 [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <JetFlash Transcend 2GB 8.07> Removable Direct Access SCSI-2 device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 1925MB (3944446 512 byte sectors) [...] da0: quirks=0x12<NO_6_BYTE,NO_RC16> [...] Root mount waiting for: usbus0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Generic Mass Storage Device (0x14cd:0x1212) [...] Root mount waiting for: usbus0 [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device Generic Mass Storage Device (0x14cd:0x1212) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device Generic Mass Storage Device (0x14cd:0x1212) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device Generic Mass Storage Device (0x14cd:0x1212) [...] ugen0.5: <Generic Mass Storage Device> at usbus0 [...] umass1 on uhub0 [...] umass1: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 4> on usbus0 [...] umass1: SCSI over Bulk-Only; quirks = 0xc101 [...] umass1:3:1: Attached to scbus3 [...] da1 at umass-sim1 bus 1 scbus3 target 0 lun 0 [...] da1: <Mass Storage Device 1.00> Removable Direct Access SCSI device [...] da1: Serial Number... [...] da1: 40.000MB/s transfers [...] da1: Attempt to query device size failed: NOT READY, Medium not present [...] da1: quirks=0x2<NO_6_BYTE> [...] da1: Write Protected [...] ugen0.6: <Realtek Bluetooth Radio> at usbus0 [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] [drm] Got stolen memory base 0x7c000000, size 0x3c00000 [...] lkpi_iic0: <LinuxKPI I2C> on drmn0 [...] iicbus0: <Philips I2C bus> on lkpi_iic0 [...] iic0: <I2C generic I/O> on iicbus0 [...] lkpi_iic1: <LinuxKPI I2C> on drmn0 [...] iicbus1: <Philips I2C bus> on lkpi_iic1 [...] iic1: <I2C generic I/O> on iicbus1 [...] lkpi_iic2: <LinuxKPI I2C> on drmn0 [...] iicbus2: <Philips I2C bus> on lkpi_iic2 [...] iic2: <I2C generic I/O> on iicbus2 [...] lkpi_iic3: <LinuxKPI I2C> on drmn0 [...] iicbus3: <Philips I2C bus> on lkpi_iic3 [...] iic3: <I2C generic I/O> on iicbus3 [...] lkpi_iic4: <LinuxKPI I2C> on drmn0 [...] iicbus4: <Philips I2C bus> on lkpi_iic4 [...] iic4: <I2C generic I/O> on iicbus4 [...] lkpi_iic5: <LinuxKPI I2C> on drmn0 [...] iicbus5: <Philips I2C bus> on lkpi_iic5 [...] iic5: <I2C generic I/O> on iicbus5 [...] lkpi_iic6: <LinuxKPI I2C> on drmn0 [...] iicbus6: <Philips I2C bus> on lkpi_iic6 [...] iic6: <I2C generic I/O> on iicbus6 [...] lkpi_iic7: <LinuxKPI I2C> on drmn0 [...] iicbus7: <Philips I2C bus> on lkpi_iic7 [...] iic7: <I2C generic I/O> on iicbus7 [...] lkpi_iic8: <LinuxKPI I2C> on drmn0 [...] iicbus8: <Philips I2C bus> on lkpi_iic8 [...] iic8: <I2C generic I/O> on iicbus8 [...] drmn0: successfully loaded firmware image 'i915/icl_dmc_ver1_09.bin' [...] drmn0: [drm] Finished loading DMC firmware i915/icl_dmc_ver1_09.bin (v1.9) [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] lkpi_iic9: <LinuxKPI I2C> on drm2 [...] iicbus9: <Philips I2C bus> on lkpi_iic9 [...] iic9: <I2C generic I/O> on iicbus9 [...] lkpi_iic10: <LinuxKPI I2C> on drm3 [...] iicbus10: <Philips I2C bus> on lkpi_iic10 [...] iic10: <I2C generic I/O> on iicbus10 [...] [drm] Initialized i915 1.6.0 20201103 for drmn0 on minor 0 [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=1050 width=1680 depth=32 [...] pbase=0x40000c0000 vbase=0xfffffe00ac0c0000 [...] name=drmn0 flags=0x0 stride=6720 bpp=32 [...] end FB_INFO [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x7fd00000-0x7fd0ffff at device 0.0 on pci1 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] wlan0: Ethernet address: ... [...] re0: link state changed to DOWN [...] lo0: link state changed to UP [...] ums0 on uhub0 [...] ums0: <SINOWEALTH Game Mouse, class 0/0, rev 1.10/1.00, addr 1> on usbus0 [...] ums0: 5 buttons and [XYZT] coordinates ID=0 [...] uhid0 on uhub0 [...] uhid0: <Logitech USB Keyboard, class 0/0, rev 1.10/86.00, addr 2> on usbus0 [...] ubt0 on uhub0 [...] ubt0: <Realtek Bluetooth Radio, class 224/1, rev 1.10/1.10, addr 5> on usbus0