[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p9 stable/24.1-n254969-8659880248c SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Xeon(R) E-2286M CPU @ 2.40GHz (2400.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ed Family=0x6 Model=0x9e Stepping=13 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x2b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16211664896 (15460 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL NUC9VXQN> [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 13 2 14 5 12 3 15 9 4 8 7 10 11 6 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x2f9c9000-0x2f9c901e [...] smbios0: Version: 3.2, BCD Revision: 3.2 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <INTEL> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 350 [...] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66,0x590-0x591 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] ix0: <Intel(R) X550-T2> mem 0x604a400000-0x604a5fffff,0x604a604000-0x604a607fff at device 0.0 on pci2 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 8 RX queues 8 TX queues [...] ix0: Using MSI-X interrupts with 9 vectors [...] ix0: allocated for 8 queues [...] ix0: allocated for 8 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: eTrack 0x80000492 PHY FW V523 [...] ix0: netmap queues/slots: TX 8/2048, RX 8/2048 [...] ix1: <Intel(R) X550-T2> mem 0x604a200000-0x604a3fffff,0x604a600000-0x604a603fff at device 0.1 on pci2 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 8 RX queues 8 TX queues [...] ix1: Using MSI-X interrupts with 9 vectors [...] ix1: allocated for 8 queues [...] ix1: allocated for 8 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: eTrack 0x80000492 PHY FW V523 [...] ix1: netmap queues/slots: TX 8/2048, RX 8/2048 [...] pcib3: <ACPI PCI-PCI bridge> at device 1.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0x604b000000-0x604bffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0x604c100000-0x604c10ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <serial bus> at device 21.1 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms, UART> at device 22.3 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x4090-0x4097,0x4080-0x4083,0x4060-0x407f mem 0x6e520000-0x6e521fff,0x6e523000-0x6e5230ff,0x6e522000-0x6e5227ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahcich6: <AHCI channel> at channel 6 on ahci0 [...] ahcich7: <AHCI channel> at channel 7 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] ahciem0: EM timeout [...] device_attach: ahciem0 attach returned 6 [...] pcib4: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] nvme0: <Generic NVMe Device> mem 0x6e300000-0x6e303fff at device 0.0 on pci4 [...] pcib5: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pci5: <network> at device 0.0 (no driver attached) [...] pcib6: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> at device 0.0 on pci6 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <PCI-PCI bridge> at device 0.0 on pci7 [...] pci8: <PCI bus> on pcib8 [...] pcib9: <PCI-PCI bridge> at device 1.0 on pci7 [...] pcib10: <ACPI PCI-PCI bridge> at device 2.0 on pci7 [...] pci9: <ACPI PCI bus> on pcib10 [...] xhci1: <Intel Titan Ridge Thunderbolt 3 USB controller> mem 0x56f00000-0x56f0ffff at device 0.0 on pci9 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib11: <PCI-PCI bridge> at device 4.0 on pci7 [...] pcib12: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci10: <ACPI PCI bus> on pcib12 [...] igb0: <Intel(R) I210 (Copper)> port 0x3000-0x301f mem 0x6e100000-0x6e17ffff,0x6e180000-0x6e183fff at device 0.0 on pci10 [...] igb0: EEPROM V3.25-0 eTrack 0x800005d0 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pci0: <simple comms> at device 30.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Coffee Lake HDA Controller> mem 0x604c110000-0x604c113fff,0x604c000000-0x604c0fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] em0: <Intel(R) I219-LM CNP(7)> mem 0x6e500000-0x6e51ffff at device 31.6 on pci0 [...] em0: EEPROM V0.5-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] hwpstate_intel8: <Intel Speed Shift> on cpu8 [...] hwpstate_intel9: <Intel Speed Shift> on cpu9 [...] hwpstate_intel10: <Intel Speed Shift> on cpu10 [...] hwpstate_intel11: <Intel Speed Shift> on cpu11 [...] hwpstate_intel12: <Intel Speed Shift> on cpu12 [...] hwpstate_intel13: <Intel Speed Shift> on cpu13 [...] hwpstate_intel14: <Intel Speed Shift> on cpu14 [...] hwpstate_intel15: <Intel Speed Shift> on cpu15 [...] Timecounter "TSC-low" frequency 1199999527 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen1.1: <Intel XHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] nvd0: <INTEL SSDPEKKW010T8> NVMe namespace [...] nvd0: 976762MB (2000409264 512 byte sectors) [...] hdacc0: <Realtek ALC256 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC256 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC256 (Front Analog)> at nid 33 and 25 on hdaa0 [...] pcm1: <Realtek ALC256 (Rear Digital)> at nid 30 on hdaa0 [...] pcm2: <Realtek ALC256 (Rear Analog Speaker)> at nid 27 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub1: 4 ports with 4 removable, self powered [...] uhub0: 26 ports with 26 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <GenesysLogic USB2.1 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <GenesysLogic USB2.1 Hub, class 9/0, rev 2.10/94.04, addr 1> on usbus0 [...] uhub2: MTT enabled [...] Root mount waiting for: usbus0 [...] uhub2: 4 ports with 4 removable, self powered [...] ugen0.3: <vendor 0x8087 product 0x0029> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.4: <GenesysLogic USB3.2 Hub> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <GenesysLogic USB3.2 Hub, class 9/0, rev 3.20/94.04, addr 3> on usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Generic USB Storage (0x05e3:0x0754) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device Generic USB Storage (0x05e3:0x0754) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device Generic USB Storage (0x05e3:0x0754) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device Generic USB Storage (0x05e3:0x0754) [...] ugen0.5: <Generic USB Storage> at usbus0 [...] umass0 on uhub0 [...] umass0: <Generic USB Storage, class 0/0, rev 3.20/16.21, addr 4> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc101 [...] umass0:6:0: Attached to scbus6 [...] (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim0:0:0:0): SCSI status: Check Condition [...] (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) [...] (probe0:umass-sim0:0:0:0): Error 6, Unretryable error [...] da0 at umass-sim0 bus 0 scbus6 target 0 lun 0 [...] da0: <Generic MassStorageClass 1621> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] igb0: link state changed to UP [...] em0: link state changed to UP [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AMW0.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi3: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi3: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] pchtherm0: <CannonLake-H Thermal Subsystem> mem 0x604c11c000-0x604c11cfff at device 18.0 on pci0 [...] ig4iic0: <Intel Cannon Lake-H I2C Controller-0> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Intel Cannon Lake-H I2C Controller-1> at device 21.1 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] Intel(R) Wireless WiFi based driver for FreeBSD [...] iwlwifi0: <iwlwifi> mem 0x6e200000-0x6e203fff at device 0.0 on pci5 [...] iwlwifi0: successfully loaded firmware image 'iwlwifi-cc-a0-73.ucode' [...] iwlwifi0: api flags index 2 larger than supported by driver [...] iwlwifi0: TLV_FW_FSEQ_VERSION: FSEQ Version: XXX.XXX.XXX.XXX [...] iwlwifi0: loaded firmware version 73.35c0a2c6.0 cc-a0-73.ucode op_mode iwlmvm [...] iwlwifi0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340 [...] iwlwifi0: Detected RF HR B3, rfid=0x10a100 [...] iwlwifi0: base HW address: XXX [...] ichsmb0: <Intel Cannon Lake SMBus controller> port 0xefa0-0xefbf mem 0x604c116000-0x604c1160ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] igb0: link state changed to DOWN [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] igb0: link state changed to UP [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 17, rcvif igb0, outif em0 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 17, rcvif igb0, outif em0 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 17, rcvif igb0, outif em0 [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 56m2s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p11 stable/24.1-n255007-1d6e165fb40 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Xeon(R) E-2286M CPU @ 2.40GHz (2400.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ed Family=0x6 Model=0x9e Stepping=13 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x2b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16211664896 (15460 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL NUC9VXQN> [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 13 3 15 5 12 2 14 7 4 6 9 10 11 8 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x2f9c9000-0x2f9c901e [...] smbios0: Version: 3.2, BCD Revision: 3.2 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <INTEL> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 350 [...] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66,0x590-0x591 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] ix0: <Intel(R) X550-T2> mem 0x604a400000-0x604a5fffff,0x604a604000-0x604a607fff at device 0.0 on pci2 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 8 RX queues 8 TX queues [...] ix0: Using MSI-X interrupts with 9 vectors [...] ix0: allocated for 8 queues [...] ix0: allocated for 8 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: eTrack 0x80000492 PHY FW V523 [...] ix0: netmap queues/slots: TX 8/2048, RX 8/2048 [...] ix1: <Intel(R) X550-T2> mem 0x604a200000-0x604a3fffff,0x604a600000-0x604a603fff at device 0.1 on pci2 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 8 RX queues 8 TX queues [...] ix1: Using MSI-X interrupts with 9 vectors [...] ix1: allocated for 8 queues [...] ix1: allocated for 8 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: eTrack 0x80000492 PHY FW V523 [...] ix1: netmap queues/slots: TX 8/2048, RX 8/2048 [...] pcib3: <ACPI PCI-PCI bridge> at device 1.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0x604b000000-0x604bffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0x604c100000-0x604c10ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <serial bus> at device 21.1 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms, UART> at device 22.3 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x4090-0x4097,0x4080-0x4083,0x4060-0x407f mem 0x6e520000-0x6e521fff,0x6e523000-0x6e5230ff,0x6e522000-0x6e5227ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahcich6: <AHCI channel> at channel 6 on ahci0 [...] ahcich7: <AHCI channel> at channel 7 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] ahciem0: EM timeout [...] device_attach: ahciem0 attach returned 6 [...] pcib4: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] nvme0: <Generic NVMe Device> mem 0x6e300000-0x6e303fff at device 0.0 on pci4 [...] pcib5: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pci5: <network> at device 0.0 (no driver attached) [...] pcib6: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> at device 0.0 on pci6 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <PCI-PCI bridge> at device 0.0 on pci7 [...] pci8: <PCI bus> on pcib8 [...] pcib9: <PCI-PCI bridge> at device 1.0 on pci7 [...] pcib10: <ACPI PCI-PCI bridge> at device 2.0 on pci7 [...] pci9: <ACPI PCI bus> on pcib10 [...] xhci1: <Intel Titan Ridge Thunderbolt 3 USB controller> mem 0x56f00000-0x56f0ffff at device 0.0 on pci9 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib11: <PCI-PCI bridge> at device 4.0 on pci7 [...] pcib12: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci10: <ACPI PCI bus> on pcib12 [...] igb0: <Intel(R) I210 (Copper)> port 0x3000-0x301f mem 0x6e100000-0x6e17ffff,0x6e180000-0x6e183fff at device 0.0 on pci10 [...] igb0: EEPROM V3.25-0 eTrack 0x800005d0 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pci0: <simple comms> at device 30.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Coffee Lake HDA Controller> mem 0x604c110000-0x604c113fff,0x604c000000-0x604c0fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] em0: <Intel(R) I219-LM CNP(7)> mem 0x6e500000-0x6e51ffff at device 31.6 on pci0 [...] em0: EEPROM V0.5-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] hwpstate_intel8: <Intel Speed Shift> on cpu8 [...] hwpstate_intel9: <Intel Speed Shift> on cpu9 [...] hwpstate_intel10: <Intel Speed Shift> on cpu10 [...] hwpstate_intel11: <Intel Speed Shift> on cpu11 [...] hwpstate_intel12: <Intel Speed Shift> on cpu12 [...] hwpstate_intel13: <Intel Speed Shift> on cpu13 [...] hwpstate_intel14: <Intel Speed Shift> on cpu14 [...] hwpstate_intel15: <Intel Speed Shift> on cpu15 [...] Timecounter "TSC-low" frequency 1200004438 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen1.1: <Intel XHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] nvd0: <INTEL SSDPEKKW010T8> NVMe namespace [...] nvd0: 976762MB (2000409264 512 byte sectors) [...] hdacc0: <Realtek ALC256 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC256 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC256 (Front Analog)> at nid 33 and 25 on hdaa0 [...] pcm1: <Realtek ALC256 (Rear Digital)> at nid 30 on hdaa0 [...] pcm2: <Realtek ALC256 (Rear Analog Speaker)> at nid 27 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub1: 4 ports with 4 removable, self powered [...] uhub0: 26 ports with 26 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <GenesysLogic USB2.1 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <GenesysLogic USB2.1 Hub, class 9/0, rev 2.10/94.04, addr 1> on usbus0 [...] uhub2: MTT enabled [...] Root mount waiting for: usbus0 [...] uhub2: 4 ports with 4 removable, self powered [...] ugen0.3: <vendor 0x8087 product 0x0029> at usbus0 [...] ugen0.4: <GenesysLogic USB3.2 Hub> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <GenesysLogic USB3.2 Hub, class 9/0, rev 3.20/94.04, addr 3> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Generic USB Storage (0x05e3:0x0754) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device Generic USB Storage (0x05e3:0x0754) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device Generic USB Storage (0x05e3:0x0754) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device Generic USB Storage (0x05e3:0x0754) [...] ugen0.5: <Generic USB Storage> at usbus0 [...] umass0 on uhub0 [...] umass0: <Generic USB Storage, class 0/0, rev 3.20/16.21, addr 4> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc101 [...] umass0:6:0: Attached to scbus6 [...] (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim0:0:0:0): SCSI status: Check Condition [...] (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) [...] (probe0:umass-sim0:0:0:0): Error 6, Unretryable error [...] da0 at umass-sim0 bus 0 scbus6 target 0 lun 0 [...] da0: <Generic MassStorageClass 1621> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE>