Probe #1581e2f112 of MSI 990FXA-GD80 Desktop Computer (MS-7640)
Log: dmesg
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] Waiting (max 60 seconds) for system process `vnlru' to stop... done
[...] Waiting (max 60 seconds) for system process `syncer' to stop...
[...] Syncing disks, vnodes remaining... 6 2 1 0 0 done
[...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done
[...] All buffers synced.
[...] ---<<BOOT>>---
[...] Copyright (c) 668B-5668 The FreeBSD Project.
[...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[...] The Regents of the University of California. All rights reserved.
[...] FreeBSD is a registered trademark of The FreeBSD Foundation.
[...] FreeBSD 13.0-STABLE stable/22.1-n248063-ac40e064d3c SMP amd64
[...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
[...] VT(efifb): resolution 1024x768
[...] CPU: AMD FX-8370 Eight-Core Processor (4000.42-MHz K8-class CPU)
[...] Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0
[...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
[...] Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
[...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
[...] AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC>
[...] Structured Extended Features=0x8<BMI1>
[...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536
[...] TSC: P-state invariant, performance statistics
[...] real memory = 34359738368 (32768 MB)
[...] avail memory = 33312321536 (31769 MB)
[...] Event timer "LAPIC" quality 100
[...] ACPI APIC Table: <ALASKA A M I>
[...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
[...] FreeBSD/SMP: 1 package(s) x 8 core(s)
[...] random: unblocking device.
[...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796)
[...] ioapic0 <Version 2.1> irqs 0-23
[...] ioapic1 <Version 2.1> irqs 24-55
[...] Launching APs: 1 6 7 5 4 3 2
[...] wlan: mac acl policy registered
[...] random: entropy device external interface
[...] kbd1 at kbdmux0
[...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
[...] efirtc0: <EFI Realtime Clock>
[...] efirtc0: registered as a time-of-day clock, resolution 1.000000s
[...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
[...] acpi0: <ALASKA A M I>
[...] acpi0: Power Button (fixed)
[...] cpu0: <ACPI CPU> on acpi0
[...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
[...] Timecounter "i8254" frequency 1193182 Hz quality 0
[...] Event timer "i8254" frequency 1193182 Hz quality 100
[...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
[...] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[...] Event timer "RTC" frequency 32768 Hz quality 0
[...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
[...] Timecounter "HPET" frequency 14318180 Hz quality 950
[...] Event timer "HPET" frequency 14318180 Hz quality 350
[...] Event timer "HPET1" frequency 14318180 Hz quality 350
[...] Event timer "HPET2" frequency 14318180 Hz quality 350
[...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
[...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[...] pci0: <ACPI PCI bus> on pcib0
[...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
[...] pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0
[...] pci1: <ACPI PCI bus> on pcib1
[...] vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd0000000-0xdfffffff,0xfea20000-0xfea3ffff irq 24 at device 0.0 on pci1
[...] vgapci0: Boot video device
[...] hdac0: <ATI RV810 HDA Controller> mem 0xfea40000-0xfea43fff irq 25 at device 0.1 on pci1
[...] pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0
[...] pci2: <ACPI PCI bus> on pcib2
[...] ahci0: <JMicron JMB362 AHCI SATA controller> port 0xd040-0xd047,0xd030-0xd033,0xd020-0xd027,0xd010-0xd013,0xd000-0xd00f mem 0xfe900000-0xfe9001ff irq 44 at device 0.0 on pci2
[...] ahci0: AHCI v1.10 with 2 3Gbps ports, Port Multiplier supported
[...] ahcich0: <AHCI channel> at channel 0 on ahci0
[...] ahcich1: <AHCI channel> at channel 1 on ahci0
[...] pcib3: <ACPI PCI-PCI bridge> irq 52 at device 5.0 on pci0
[...] pci3: <ACPI PCI bus> on pcib3
[...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem 0xfe804000-0xfe804fff,0xfe800000-0xfe803fff irq 46 at device 0.0 on pci3
[...] re0: Using 1 MSI-X message
[...] re0: Chip rev. 0x2c800000
[...] re0: MAC rev. 0x00100000
[...] miibus0: <MII bus> on re0
[...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
[...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
[...] re0: Using defaults for TSO: 65518/35/2048
[...] re0: Ethernet address: ...
[...] re0: netmap queues/slots: TX 1/256, RX 1/256
[...] pcib4: <ACPI PCI-PCI bridge> irq 53 at device 6.0 on pci0
[...] pci4: <ACPI PCI bus> on pcib4
[...] xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfe700000-0xfe701fff irq 51 at device 0.0 on pci4
[...] xhci0: 32 bytes context size, 32-bit DMA
[...] usbus0 on xhci0
[...] usbus0: 5.0Gbps Super Speed USB v3.0
[...] pcib5: <ACPI PCI-PCI bridge> irq 53 at device 7.0 on pci0
[...] pci5: <ACPI PCI bus> on pcib5
[...] xhci1: <NEC uPD720200 USB 3.0 controller> mem 0xfe600000-0xfe601fff irq 50 at device 0.0 on pci5
[...] xhci1: 32 bytes context size, 32-bit DMA
[...] usbus1 on xhci1
[...] usbus1: 5.0Gbps Super Speed USB v3.0
[...] pcib6: <ACPI PCI-PCI bridge> irq 54 at device 12.0 on pci0
[...] pci6: <ACPI PCI bus> on pcib6
[...] igb0: <Intel(R) PRO/1000 82576> port 0xb020-0xb03f mem 0xfe420000-0xfe43ffff,0xfe000000-0xfe3fffff,0xfe444000-0xfe447fff irq 36 at device 0.0 on pci6
[...] igb0: EEPROM V1.2-1
[...] igb0: Using 1024 TX descriptors and 1024 RX descriptors
[...] igb0: Using 8 RX queues 8 TX queues
[...] igb0: Using MSI-X interrupts with 9 vectors
[...] igb0: Ethernet address: ...
[...] igb0: netmap queues/slots: TX 8/1024, RX 8/1024
[...] igb1: <Intel(R) PRO/1000 82576> port 0xb000-0xb01f mem 0xfe400000-0xfe41ffff,0xfd800000-0xfdbfffff,0xfe440000-0xfe443fff irq 37 at device 0.1 on pci6
[...] igb1: EEPROM V1.2-1
[...] igb1: Using 1024 TX descriptors and 1024 RX descriptors
[...] igb1: Using 8 RX queues 8 TX queues
[...] igb1: Using MSI-X interrupts with 9 vectors
[...] igb1: Ethernet address: ...
[...] igb1: netmap queues/slots: TX 8/1024, RX 8/1024
[...] ahci1: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf050-0xf05f mem 0xfeb0b000-0xfeb0b3ff irq 19 at device 17.0 on pci0
[...] ahci1: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported
[...] ahci1: quirks=0x22000<ATI_PMP_BUG,1MSI>
[...] ahcich2: <AHCI channel> at channel 0 on ahci1
[...] ahcich3: <AHCI channel> at channel 1 on ahci1
[...] ahcich4: <AHCI channel> at channel 2 on ahci1
[...] ahcich5: <AHCI channel> at channel 3 on ahci1
[...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb0a000-0xfeb0afff irq 18 at device 18.0 on pci0
[...] usbus2 on ohci0
[...] usbus2: 12Mbps Full Speed USB v1.0
[...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb09000-0xfeb090ff irq 17 at device 18.2 on pci0
[...] usbus3: EHCI version 1.0
[...] usbus3 on ehci0
[...] usbus3: 480Mbps High Speed USB v2.0
[...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb08000-0xfeb08fff irq 18 at device 19.0 on pci0
[...] usbus4 on ohci1
[...] usbus4: 12Mbps Full Speed USB v1.0
[...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb07000-0xfeb070ff irq 17 at device 19.2 on pci0
[...] usbus5: EHCI version 1.0
[...] usbus5 on ehci1
[...] usbus5: 480Mbps High Speed USB v2.0
[...] atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f irq 17 at device 20.1 on pci0
[...] ata0: <ATA channel> at channel 0 on atapci0
[...] ata1: <ATA channel> at channel 1 on atapci0
[...] hdac1: <ATI SB600 HDA Controller> mem 0xfeb00000-0xfeb03fff irq 16 at device 20.2 on pci0
[...] isab0: <PCI-ISA bridge> at device 20.3 on pci0
[...] isa0: <ISA bus> on isab0
[...] pcib7: <ACPI PCI-PCI bridge> at device 20.4 on pci0
[...] pci7: <ACPI PCI bus> on pcib7
[...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb06000-0xfeb06fff irq 18 at device 20.5 on pci0
[...] usbus6 on ohci2
[...] usbus6: 12Mbps Full Speed USB v1.0
[...] pcib8: <ACPI PCI-PCI bridge> at device 21.0 on pci0
[...] pci8: <ACPI PCI bus> on pcib8
[...] pcib9: <ACPI PCI-PCI bridge> at device 21.1 on pci0
[...] pci9: <ACPI PCI bus> on pcib9
[...] pci9: <serial bus, FireWire> at device 0.0 (no driver attached)
[...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb05000-0xfeb05fff irq 18 at device 22.0 on pci0
[...] usbus7 on ohci3
[...] usbus7: 12Mbps Full Speed USB v1.0
[...] ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb04000-0xfeb040ff irq 17 at device 22.2 on pci0
[...] usbus8: EHCI version 1.0
[...] usbus8 on ehci2
[...] usbus8: 480Mbps High Speed USB v2.0
[...] acpi_button0: <Power Button> on acpi0
[...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0
[...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
[...] atkbd0: <AT Keyboard> irq 1 on atkbdc0
[...] kbd0 at atkbd0
[...] atkbd0: [GIANT-LOCKED]
[...] uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0
[...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0
[...] Timecounter "TSC-low" frequency 2000132639 Hz quality 1000
[...] Timecounters tick every 1.000 msec
[...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
[...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
[...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
[...] hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1
[...] hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1
[...] pcm1: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1
[...] pcm2: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1
[...] pcm3: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1
[...] pcm4: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa1
[...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]...
[...] Root mount waiting for: CAM usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 usbus6 usbus7 usbus8
[...] ugen1.1: <0x1033 XHCI root HUB> at usbus1
[...] ugen7.1: <ATI OHCI root HUB> at usbus7
[...] ugen6.1: <ATI OHCI root HUB> at usbus6
[...] uhub0 on usbus1
[...] uhub1 on usbus6
[...] uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
[...] ugen0.1: <0x1033 XHCI root HUB> at usbus0
[...] uhub0: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
[...] uhub2 on usbus0
[...] uhub2: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[...] ugen4.1: <ATI OHCI root HUB> at usbus4
[...] uhub3 on usbus7
[...] uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7
[...] ugen3.1: <ATI EHCI root HUB> at usbus3
[...] ugen8.1: <ATI EHCI root HUB> at usbus8
[...] ugen5.1: <ATI EHCI root HUB> at usbus5
[...] uhub4 on usbus3
[...] uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
[...] uhub5 on usbus8
[...] uhub6 on usbus5
[...] uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
[...] uhub7 on usbus4
[...] uhub7: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
[...] uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8
[...] ugen2.1: <ATI OHCI root HUB> at usbus2
[...] uhub8 on usbus2
[...] uhub8: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
[...] uhub1: 2 ports with 2 removable, self powered
[...] uhub3: 4 ports with 4 removable, self powered
[...] uhub8: 5 ports with 5 removable, self powered
[...] uhub7: 5 ports with 5 removable, self powered
[...] uhub2: 4 ports with 4 removable, self powered
[...] uhub0: 4 ports with 4 removable, self powered
[...] Root mount waiting for: CAM usbus3 usbus5 usbus8
[...] uhub5: 4 ports with 4 removable, self powered
[...] uhub4: 5 ports with 5 removable, self powered
[...] uhub6: 5 ports with 5 removable, self powered
[...] Root mount waiting for: CAM
[...] Root mount waiting for: CAM
[...] ada0 at ahcich3 bus 0 scbus3 target 0 lun 0
[...] ada0: <SAMSUNG SSD 830 Series CXM03B1Q> ACS-2 ATA SATA 3.x device
[...] ada0: Serial Number...
[...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
[...] ada0: Command Queueing enabled
[...] ada0: 122104MB (250069680 512 byte sectors)
[...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
[...] mountroot: waiting for device /dev/gpt/rootfs...
[...] re0: link state changed to UP
[...] igb0: link state changed to UP
[...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0
[...] smbus0: <System Management Bus> on intsmb0
[...] acpi_wmi0: <ACPI-WMI mapping> on acpi0
[...] acpi_wmi0: cannot find EC device
[...] acpi_wmi1: <ACPI-WMI mapping> on acpi0
[...] acpi_wmi1: cannot find EC device
[...] lo0: link state changed to UP
[...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4
[...] igb0: link state changed to DOWN
[...] re0: link state changed to DOWN
[...] igb0: link state changed to UP
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] re0: link state changed to UP
[...] pflog0: permanently promiscuous mode enabled
[...] WARNING: attempt to domain_add(netgraph) after domainfinalize()
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] re0: link state changed to DOWN
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] igb1: link state changed to UP
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] Waiting (max 60 seconds) for system process `vnlru' to stop... done
[...] Waiting (max 60 seconds) for system process `syncer' to stop...
[...] Syncing disks, vnodes remaining... 3 3 1 0 0 done
[...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done
[...] All buffers synced.
[...] ---<<BOOT>>---
[...] Copyright (c) 668B-5668 The FreeBSD Project.
[...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[...] The Regents of the University of California. All rights reserved.
[...] FreeBSD is a registered trademark of The FreeBSD Foundation.
[...] FreeBSD 13.0-STABLE stable/22.1-n248063-ac40e064d3c SMP amd64
[...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
[...] VT(efifb): resolution 1024x768
[...] CPU: AMD FX-8370 Eight-Core Processor (4000.40-MHz K8-class CPU)
[...] Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0
[...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
[...] Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
[...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
[...] AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC>
[...] Structured Extended Features=0x8<BMI1>
[...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536
[...] TSC: P-state invariant, performance statistics
[...] real memory = 34359738368 (32768 MB)
[...] avail memory = 33312321536 (31769 MB)
[...] Event timer "LAPIC" quality 100
[...] ACPI APIC Table: <ALASKA A M I>
[...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
[...] FreeBSD/SMP: 1 package(s) x 8 core(s)
[...] random: unblocking device.
[...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796)
[...] ioapic0 <Version 2.1> irqs 0-23
[...] ioapic1 <Version 2.1> irqs 24-55
[...] Launching APs: 1 7 6 3 5 4 2
[...] wlan: mac acl policy registered
[...] random: entropy device external interface
[...] kbd1 at kbdmux0
[...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
[...] efirtc0: <EFI Realtime Clock>
[...] efirtc0: registered as a time-of-day clock, resolution 1.000000s
[...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
[...] acpi0: <ALASKA A M I>
[...] acpi0: Power Button (fixed)
[...] cpu0: <ACPI CPU> on acpi0
[...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
[...] Timecounter "i8254" frequency 1193182 Hz quality 0
[...] Event timer "i8254" frequency 1193182 Hz quality 100
[...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
[...] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[...] Event timer "RTC" frequency 32768 Hz quality 0
[...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
[...] Timecounter "HPET" frequency 14318180 Hz quality 950
[...] Event timer "HPET" frequency 14318180 Hz quality 350
[...] Event timer "HPET1" frequency 14318180 Hz quality 350
[...] Event timer "HPET2" frequency 14318180 Hz quality 350
[...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
[...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[...] pci0: <ACPI PCI bus> on pcib0
[...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
[...] pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0
[...] pci1: <ACPI PCI bus> on pcib1
[...] vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd0000000-0xdfffffff,0xfea20000-0xfea3ffff irq 24 at device 0.0 on pci1
[...] vgapci0: Boot video device
[...] hdac0: <ATI RV810 HDA Controller> mem 0xfea40000-0xfea43fff irq 25 at device 0.1 on pci1
[...] pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0
[...] pci2: <ACPI PCI bus> on pcib2
[...] ahci0: <JMicron JMB362 AHCI SATA controller> port 0xd040-0xd047,0xd030-0xd033,0xd020-0xd027,0xd010-0xd013,0xd000-0xd00f mem 0xfe900000-0xfe9001ff irq 44 at device 0.0 on pci2
[...] ahci0: AHCI v1.10 with 2 3Gbps ports, Port Multiplier supported
[...] ahcich0: <AHCI channel> at channel 0 on ahci0
[...] ahcich1: <AHCI channel> at channel 1 on ahci0
[...] pcib3: <ACPI PCI-PCI bridge> irq 52 at device 5.0 on pci0
[...] pci3: <ACPI PCI bus> on pcib3
[...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem 0xfe804000-0xfe804fff,0xfe800000-0xfe803fff irq 46 at device 0.0 on pci3
[...] re0: Using 1 MSI-X message
[...] re0: Chip rev. 0x2c800000
[...] re0: MAC rev. 0x00100000
[...] miibus0: <MII bus> on re0
[...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
[...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
[...] re0: Using defaults for TSO: 65518/35/2048
[...] re0: Ethernet address: ...
[...] re0: netmap queues/slots: TX 1/256, RX 1/256
[...] pcib4: <ACPI PCI-PCI bridge> irq 53 at device 6.0 on pci0
[...] pci4: <ACPI PCI bus> on pcib4
[...] xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfe700000-0xfe701fff irq 51 at device 0.0 on pci4
[...] xhci0: 32 bytes context size, 32-bit DMA
[...] usbus0 on xhci0
[...] usbus0: 5.0Gbps Super Speed USB v3.0
[...] pcib5: <ACPI PCI-PCI bridge> irq 53 at device 7.0 on pci0
[...] pci5: <ACPI PCI bus> on pcib5
[...] xhci1: <NEC uPD720200 USB 3.0 controller> mem 0xfe600000-0xfe601fff irq 50 at device 0.0 on pci5
[...] xhci1: 32 bytes context size, 32-bit DMA
[...] usbus1 on xhci1
[...] usbus1: 5.0Gbps Super Speed USB v3.0
[...] pcib6: <ACPI PCI-PCI bridge> irq 54 at device 12.0 on pci0
[...] pci6: <ACPI PCI bus> on pcib6
[...] igb0: <Intel(R) PRO/1000 82576> port 0xb020-0xb03f mem 0xfe420000-0xfe43ffff,0xfe000000-0xfe3fffff,0xfe444000-0xfe447fff irq 36 at device 0.0 on pci6
[...] igb0: EEPROM V1.2-1
[...] igb0: Using 1024 TX descriptors and 1024 RX descriptors
[...] igb0: Using 8 RX queues 8 TX queues
[...] igb0: Using MSI-X interrupts with 9 vectors
[...] igb0: Ethernet address: ...
[...] igb0: netmap queues/slots: TX 8/1024, RX 8/1024
[...] igb1: <Intel(R) PRO/1000 82576> port 0xb000-0xb01f mem 0xfe400000-0xfe41ffff,0xfd800000-0xfdbfffff,0xfe440000-0xfe443fff irq 37 at device 0.1 on pci6
[...] igb1: EEPROM V1.2-1
[...] igb1: Using 1024 TX descriptors and 1024 RX descriptors
[...] igb1: Using 8 RX queues 8 TX queues
[...] igb1: Using MSI-X interrupts with 9 vectors
[...] igb1: Ethernet address: ...
[...] igb1: netmap queues/slots: TX 8/1024, RX 8/1024
[...] ahci1: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf050-0xf05f mem 0xfeb0b000-0xfeb0b3ff irq 19 at device 17.0 on pci0
[...] ahci1: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported
[...] ahci1: quirks=0x22000<ATI_PMP_BUG,1MSI>
[...] ahcich2: <AHCI channel> at channel 0 on ahci1
[...] ahcich3: <AHCI channel> at channel 1 on ahci1
[...] ahcich4: <AHCI channel> at channel 2 on ahci1
[...] ahcich5: <AHCI channel> at channel 3 on ahci1
[...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb0a000-0xfeb0afff irq 18 at device 18.0 on pci0
[...] usbus2 on ohci0
[...] usbus2: 12Mbps Full Speed USB v1.0
[...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb09000-0xfeb090ff irq 17 at device 18.2 on pci0
[...] usbus3: EHCI version 1.0
[...] usbus3 on ehci0
[...] usbus3: 480Mbps High Speed USB v2.0
[...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb08000-0xfeb08fff irq 18 at device 19.0 on pci0
[...] usbus4 on ohci1
[...] usbus4: 12Mbps Full Speed USB v1.0
[...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb07000-0xfeb070ff irq 17 at device 19.2 on pci0
[...] usbus5: EHCI version 1.0
[...] usbus5 on ehci1
[...] usbus5: 480Mbps High Speed USB v2.0
[...] atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f irq 17 at device 20.1 on pci0
[...] ata0: <ATA channel> at channel 0 on atapci0
[...] ata1: <ATA channel> at channel 1 on atapci0
[...] hdac1: <ATI SB600 HDA Controller> mem 0xfeb00000-0xfeb03fff irq 16 at device 20.2 on pci0
[...] isab0: <PCI-ISA bridge> at device 20.3 on pci0
[...] isa0: <ISA bus> on isab0
[...] pcib7: <ACPI PCI-PCI bridge> at device 20.4 on pci0
[...] pci7: <ACPI PCI bus> on pcib7
[...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb06000-0xfeb06fff irq 18 at device 20.5 on pci0
[...] usbus6 on ohci2
[...] usbus6: 12Mbps Full Speed USB v1.0
[...] pcib8: <ACPI PCI-PCI bridge> at device 21.0 on pci0
[...] pci8: <ACPI PCI bus> on pcib8
[...] pcib9: <ACPI PCI-PCI bridge> at device 21.1 on pci0
[...] pci9: <ACPI PCI bus> on pcib9
[...] pci9: <serial bus, FireWire> at device 0.0 (no driver attached)
[...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb05000-0xfeb05fff irq 18 at device 22.0 on pci0
[...] usbus7 on ohci3
[...] usbus7: 12Mbps Full Speed USB v1.0
[...] ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb04000-0xfeb040ff irq 17 at device 22.2 on pci0
[...] usbus8: EHCI version 1.0
[...] usbus8 on ehci2
[...] usbus8: 480Mbps High Speed USB v2.0
[...] acpi_button0: <Power Button> on acpi0
[...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0
[...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
[...] atkbd0: <AT Keyboard> irq 1 on atkbdc0
[...] kbd0 at atkbd0
[...] atkbd0: [GIANT-LOCKED]
[...] uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0
[...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0
[...] Timecounter "TSC-low" frequency 2000132251 Hz quality 1000
[...] Timecounters tick every 1.000 msec
[...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
[...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
[...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
[...] hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1
[...] hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1
[...] pcm1: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1
[...] pcm2: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1
[...] pcm3: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1
[...] pcm4: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa1
[...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]...
[...] Root mount waiting for: CAM usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 usbus6 usbus7 usbus8
[...] ugen7.1: <ATI OHCI root HUB> at usbus7
[...] uhub0 on usbus7
[...] uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7
[...] ugen8.1: <ATI EHCI root HUB> at usbus8
[...] ugen1.1: <0x1033 XHCI root HUB> at usbus1
[...] ugen4.1: <ATI OHCI root HUB> at usbus4
[...] ugen3.1: <ATI EHCI root HUB> at usbus3
[...] ugen6.1: <ATI OHCI root HUB> at usbus6
[...] ugen2.1: <ATI OHCI root HUB> at usbus2
[...] uhub1 on usbus8
[...] uhub2 on usbus2
[...] uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
[...] uhub3 on usbus1
[...] uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8
[...] uhub4 on usbus3
[...] uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
[...] uhub5 on usbus4
[...] uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
[...] uhub3: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
[...] uhub6 on usbus6
[...] uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
[...] ugen5.1: <ATI EHCI root HUB> at usbus5
[...] uhub7 on usbus5
[...] uhub7: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
[...] ugen0.1: <0x1033 XHCI root HUB> at usbus0
[...] uhub8 on usbus0
[...] uhub8: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[...] uhub6: 2 ports with 2 removable, self powered
[...] uhub0: 4 ports with 4 removable, self powered
[...] uhub5: 5 ports with 5 removable, self powered
[...] uhub2: 5 ports with 5 removable, self powered
[...] uhub3: 4 ports with 4 removable, self powered
[...] uhub8: 4 ports with 4 removable, self powered
[...] Root mount waiting for: CAM usbus3 usbus5 usbus8
[...] uhub1: 4 ports with 4 removable, self powered
[...] uhub7: 5 ports with 5 removable, self powered
[...] uhub4: 5 ports with 5 removable, self powered
[...] Root mount waiting for: CAM
[...] Root mount waiting for: CAM
[...] ada0 at ahcich3 bus 0 scbus3 target 0 lun 0
[...] ada0: <SAMSUNG SSD 830 Series CXM03B1Q> ACS-2 ATA SATA 3.x device
[...] ada0: Serial Number...
[...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
[...] ada0: Command Queueing enabled
[...] ada0: 122104MB (250069680 512 byte sectors)
[...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
[...] mountroot: waiting for device /dev/gpt/rootfs...
[...] re0: link state changed to DOWN
[...] igb0: link state changed to UP
[...] igb1: link state changed to UP
[...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0
[...] smbus0: <System Management Bus> on intsmb0
[...] acpi_wmi0: <ACPI-WMI mapping> on acpi0
[...] acpi_wmi0: cannot find EC device
[...] acpi_wmi1: <ACPI-WMI mapping> on acpi0
[...] acpi_wmi1: cannot find EC device
[...] lo0: link state changed to UP
[...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4
[...] igb0: link state changed to DOWN
[...] igb1: link state changed to DOWN
[...] igb0: link state changed to UP
[...] igb1: link state changed to UP
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] pflog0: permanently promiscuous mode enabled
[...] WARNING: attempt to domain_add(netgraph) after domainfinalize()
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] igb1: link state changed to DOWN
[...] re0: link state changed to UP
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0
[...] Waiting (max 60 seconds) for system process `vnlru' to stop... done
[...] Waiting (max 60 seconds) for system process `syncer' to stop...
[...] Syncing disks, vnodes remaining... 32 11 2 0 0 done
[...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done
[...] All buffers synced.
[...] ---<<BOOT>>---
[...] Copyright (c) 668B-5668 The FreeBSD Project.
[...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[...] The Regents of the University of California. All rights reserved.
[...] FreeBSD is a registered trademark of The FreeBSD Foundation.
[...] FreeBSD 13.0-STABLE stable/22.1-n248063-ac40e064d3c SMP amd64
[...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
[...] VT(efifb): resolution 1024x768
[...] CPU: AMD FX-8370 Eight-Core Processor (4000.41-MHz K8-class CPU)
[...] Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0
[...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
[...] Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
[...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
[...] AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC>
[...] Structured Extended Features=0x8<BMI1>
[...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536
[...] TSC: P-state invariant, performance statistics
[...] real memory = 34359738368 (32768 MB)
[...] avail memory = 33312247808 (31769 MB)
[...] Event timer "LAPIC" quality 100
[...] ACPI APIC Table: <ALASKA A M I>
[...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
[...] FreeBSD/SMP: 1 package(s) x 8 core(s)
[...] random: unblocking device.
[...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796)
[...] ioapic0 <Version 2.1> irqs 0-23
[...] ioapic1 <Version 2.1> irqs 24-55
[...] Launching APs: 1 4 5 2 3 7 6
[...] wlan: mac acl policy registered
[...] random: entropy device external interface
[...] kbd1 at kbdmux0
[...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
[...] efirtc0: <EFI Realtime Clock>
[...] efirtc0: registered as a time-of-day clock, resolution 1.000000s
[...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
[...] acpi0: <ALASKA A M I>
[...] acpi0: Power Button (fixed)
[...] cpu0: <ACPI CPU> on acpi0
[...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
[...] Timecounter "i8254" frequency 1193182 Hz quality 0
[...] Event timer "i8254" frequency 1193182 Hz quality 100
[...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
[...] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[...] Event timer "RTC" frequency 32768 Hz quality 0
[...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
[...] Timecounter "HPET" frequency 14318180 Hz quality 950
[...] Event timer "HPET" frequency 14318180 Hz quality 350
[...] Event timer "HPET1" frequency 14318180 Hz quality 350
[...] Event timer "HPET2" frequency 14318180 Hz quality 350
[...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
[...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[...] pci0: <ACPI PCI bus> on pcib0
[...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
[...] pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0
[...] pci1: <ACPI PCI bus> on pcib1
[...] vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd0000000-0xdfffffff,0xfea20000-0xfea3ffff irq 24 at device 0.0 on pci1
[...] vgapci0: Boot video device
[...] hdac0: <ATI RV810 HDA Controller> mem 0xfea40000-0xfea43fff irq 25 at device 0.1 on pci1
[...] pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0
[...] pci2: <ACPI PCI bus> on pcib2
[...] ahci0: <JMicron JMB362 AHCI SATA controller> port 0xd040-0xd047,0xd030-0xd033,0xd020-0xd027,0xd010-0xd013,0xd000-0xd00f mem 0xfe900000-0xfe9001ff irq 44 at device 0.0 on pci2
[...] ahci0: AHCI v1.10 with 2 3Gbps ports, Port Multiplier supported
[...] ahcich0: <AHCI channel> at channel 0 on ahci0
[...] ahcich1: <AHCI channel> at channel 1 on ahci0
[...] pcib3: <ACPI PCI-PCI bridge> irq 52 at device 5.0 on pci0
[...] pci3: <ACPI PCI bus> on pcib3
[...] re0: <Realtek PCIe GbE Family Controller> port 0xc000-0xc0ff mem 0xfe804000-0xfe804fff,0xfe800000-0xfe803fff irq 46 at device 0.0 on pci3
[...] re0: Using Memory Mapping!
[...] re0: Using 1 MSI-X message
[...] re0: version:1.96.04
[...] re0: Ethernet address: ...
[...]
[...] This product is covered by one or more of the following patents:
[...] US6,570,884, US6,115,776, and US6,327,625.
[...] re0: Ethernet address: ...
[...] pcib4: <ACPI PCI-PCI bridge> irq 53 at device 6.0 on pci0
[...] pci4: <ACPI PCI bus> on pcib4
[...] xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfe700000-0xfe701fff irq 51 at device 0.0 on pci4
[...] xhci0: 32 bytes context size, 32-bit DMA
[...] usbus0 on xhci0
[...] usbus0: 5.0Gbps Super Speed USB v3.0
[...] pcib5: <ACPI PCI-PCI bridge> irq 53 at device 7.0 on pci0
[...] pci5: <ACPI PCI bus> on pcib5
[...] xhci1: <NEC uPD720200 USB 3.0 controller> mem 0xfe600000-0xfe601fff irq 50 at device 0.0 on pci5
[...] xhci1: 32 bytes context size, 32-bit DMA
[...] usbus1 on xhci1
[...] usbus1: 5.0Gbps Super Speed USB v3.0
[...] pcib6: <ACPI PCI-PCI bridge> irq 54 at device 12.0 on pci0
[...] pci6: <ACPI PCI bus> on pcib6
[...] igb0: <Intel(R) PRO/1000 82576> port 0xb020-0xb03f mem 0xfe420000-0xfe43ffff,0xfe000000-0xfe3fffff,0xfe444000-0xfe447fff irq 36 at device 0.0 on pci6
[...] igb0: EEPROM V1.2-1
[...] igb0: Using 1024 TX descriptors and 1024 RX descriptors
[...] igb0: Using 8 RX queues 8 TX queues
[...] igb0: Using MSI-X interrupts with 9 vectors
[...] igb0: Ethernet address: ...
[...] igb0: netmap queues/slots: TX 8/1024, RX 8/1024
[...] igb1: <Intel(R) PRO/1000 82576> port 0xb000-0xb01f mem 0xfe400000-0xfe41ffff,0xfd800000-0xfdbfffff,0xfe440000-0xfe443fff irq 37 at device 0.1 on pci6
[...] igb1: EEPROM V1.2-1
[...] igb1: Using 1024 TX descriptors and 1024 RX descriptors
[...] igb1: Using 8 RX queues 8 TX queues
[...] igb1: Using MSI-X interrupts with 9 vectors
[...] igb1: Ethernet address: ...
[...] igb1: netmap queues/slots: TX 8/1024, RX 8/1024
[...] ahci1: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf050-0xf05f mem 0xfeb0b000-0xfeb0b3ff irq 19 at device 17.0 on pci0
[...] ahci1: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported
[...] ahci1: quirks=0x22000<ATI_PMP_BUG,1MSI>
[...] ahcich2: <AHCI channel> at channel 0 on ahci1
[...] ahcich3: <AHCI channel> at channel 1 on ahci1
[...] ahcich4: <AHCI channel> at channel 2 on ahci1
[...] ahcich5: <AHCI channel> at channel 3 on ahci1
[...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb0a000-0xfeb0afff irq 18 at device 18.0 on pci0
[...] usbus2 on ohci0
[...] usbus2: 12Mbps Full Speed USB v1.0
[...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb09000-0xfeb090ff irq 17 at device 18.2 on pci0
[...] usbus3: EHCI version 1.0
[...] usbus3 on ehci0
[...] usbus3: 480Mbps High Speed USB v2.0
[...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb08000-0xfeb08fff irq 18 at device 19.0 on pci0
[...] usbus4 on ohci1
[...] usbus4: 12Mbps Full Speed USB v1.0
[...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb07000-0xfeb070ff irq 17 at device 19.2 on pci0
[...] usbus5: EHCI version 1.0
[...] usbus5 on ehci1
[...] usbus5: 480Mbps High Speed USB v2.0
[...] atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f irq 17 at device 20.1 on pci0
[...] ata0: <ATA channel> at channel 0 on atapci0
[...] ata1: <ATA channel> at channel 1 on atapci0
[...] hdac1: <ATI SB600 HDA Controller> mem 0xfeb00000-0xfeb03fff irq 16 at device 20.2 on pci0
[...] isab0: <PCI-ISA bridge> at device 20.3 on pci0
[...] isa0: <ISA bus> on isab0
[...] pcib7: <ACPI PCI-PCI bridge> at device 20.4 on pci0
[...] pci7: <ACPI PCI bus> on pcib7
[...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb06000-0xfeb06fff irq 18 at device 20.5 on pci0
[...] usbus6 on ohci2
[...] usbus6: 12Mbps Full Speed USB v1.0
[...] pcib8: <ACPI PCI-PCI bridge> at device 21.0 on pci0
[...] pci8: <ACPI PCI bus> on pcib8
[...] pcib9: <ACPI PCI-PCI bridge> at device 21.1 on pci0
[...] pci9: <ACPI PCI bus> on pcib9
[...] pci9: <serial bus, FireWire> at device 0.0 (no driver attached)
[...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb05000-0xfeb05fff irq 18 at device 22.0 on pci0
[...] usbus7 on ohci3
[...] usbus7: 12Mbps Full Speed USB v1.0
[...] ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb04000-0xfeb040ff irq 17 at device 22.2 on pci0
[...] usbus8: EHCI version 1.0
[...] usbus8 on ehci2
[...] usbus8: 480Mbps High Speed USB v2.0
[...] acpi_button0: <Power Button> on acpi0
[...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0
[...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
[...] atkbd0: <AT Keyboard> irq 1 on atkbdc0
[...] kbd0 at atkbd0
[...] atkbd0: [GIANT-LOCKED]
[...] uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0
[...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0
[...] Timecounter "TSC-low" frequency 2000131913 Hz quality 1000
[...] Timecounters tick every 1.000 msec
[...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
[...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
[...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
[...] hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1
[...] hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1
[...] pcm1: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1
[...] pcm2: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1
[...] pcm3: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1
[...] pcm4: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa1
[...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]...
[...] Root mount waiting for: CAM usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 usbus6 usbus7 usbus8
[...] ugen3.1: <ATI EHCI root HUB> at usbus3
[...] ugen7.1: <ATI OHCI root HUB> at usbus7
[...] ugen0.1: <0x1033 XHCI root HUB> at usbus0
[...] uhub0 on usbus3
[...] uhub1 on usbus0
[...] uhub1: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[...] uhub2 on usbus7
[...] ugen1.1: <0x1033 XHCI root HUB> at usbus1
[...] ugen4.1: <ATI OHCI root HUB> at usbus4
[...] uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
[...] ugen2.1: <ATI OHCI root HUB> at usbus2
[...] ugen6.1: <ATI OHCI root HUB> at usbus6
[...] uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7
[...] ugen8.1: <ATI EHCI root HUB> at usbus8
[...] uhub3 on usbus8
[...] uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8
[...] uhub4 on usbus1
[...] uhub4: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
[...] uhub5 on usbus4
[...] uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
[...] ugen5.1: <ATI EHCI root HUB> at usbus5
[...] uhub6 on usbus6
[...] uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
[...] uhub7 on usbus5
[...] uhub7: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
[...] uhub8 on usbus2
[...] uhub8: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
[...] uhub6: 2 ports with 2 removable, self powered
[...] uhub2: 4 ports with 4 removable, self powered
[...] uhub8: 5 ports with 5 removable, self powered
[...] uhub5: 5 ports with 5 removable, self powered
[...] uhub1: 4 ports with 4 removable, self powered
[...] uhub4: 4 ports with 4 removable, self powered
[...] Root mount waiting for: CAM usbus3 usbus5 usbus8
[...] uhub3: 4 ports with 4 removable, self powered
[...] uhub7: 5 ports with 5 removable, self powered
[...] uhub0: 5 ports with 5 removable, self powered
[...] Root mount waiting for: CAM
[...] Root mount waiting for: CAM
[...] Root mount waiting for: CAM
[...] ada0 at ahcich3 bus 0 scbus3 target 0 lun 0
[...] ada0: <SAMSUNG SSD 830 Series CXM03B1Q> ACS-2 ATA SATA 3.x device
[...] ada0: Serial Number...
[...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
[...] ada0: Command Queueing enabled
[...] ada0: 122104MB (250069680 512 byte sectors)
[...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
[...] mountroot: waiting for device /dev/gpt/rootfs...
