[...] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [...] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [...] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [...] 2024 [...] The NetBSD Foundation, Inc. All rights reserved. [...] Copyright (c) 1982, 1986, 1989, 1991, 1993 [...] The Regents of the University of California. All rights reserved. [...] [...] NetBSD 10.1 (MYKERNEL-$Revision: XXX.XXX.XXX.XXX $) #5: Mon Mar 10 06:53:36 UTC 2025 [...] XXX@XXX:/usr/src/sys/arch/amd64/compile/MYKERNEL [...] total memory = 3891 MB [...] avail memory = 3736 MB [...] timecounter: Timecounters tick every 10.000 msec [...] Kernelized RAIDframe activated [...] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 [...] mainbus0 (root) [...] ACPI: RSDP 0x00000000000F68E0 000024 (v02 LENOVO) [...] ACPI: XSDT 0x00000000BB7F080E 000094 (v01 LENOVO TP-6Q 00001400 LTP 00000000) [...] ACPI: FACP 0x00000000BB7F0900 0000F4 (v04 LENOVO TP-6Q 00001400 LNVO 00000001) [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20221020/tbfadt-640) [...] Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20221020/tbfadt-742) [...] ACPI: DSDT 0x00000000BB7F0C6B 00DE88 (v01 LENOVO TP-6Q 00001400 MSFT 03000001) [...] ACPI: FACS 0x00000000BB6E7000 000040 [...] ACPI: SSDT 0x00000000BB7F0AB4 0001B7 (v01 LENOVO TP-6Q 00001400 MSFT 03000001) [...] ACPI: ECDT 0x00000000BB7FEAF3 000052 (v01 LENOVO TP-6Q 00001400 LNVO 00000001) [...] ACPI: APIC 0x00000000BB7FEB45 000084 (v01 LENOVO TP-6Q 00001400 LNVO 00000001) [...] ACPI: MCFG 0x00000000BB7FEC01 00003C (v01 LENOVO TP-6Q 00001400 LNVO 00000001) [...] ACPI: HPET 0x00000000BB7FEC3D 000038 (v01 LENOVO TP-6Q 00001400 LNVO 00000001) [...] ACPI: ASF! 0x00000000BB7FEDBE 0000A4 (v16 LENOVO TP-6Q 00001400 PTL 00000001) [...] ACPI: SLIC 0x00000000BB7FEE62 000176 (v01 LENOVO TP-6Q 00001400 LTP 00000000) [...] ACPI: BOOT 0x00000000BB7FEFD8 000028 (v01 LENOVO TP-6Q 00001400 LTP 00000001) [...] ACPI: SSDT 0x00000000BB6E590A 00085B (v01 LENOVO TP-6Q 00001400 INTL 20050513) [...] ACPI: TCPA 0x00000000BB78B000 000032 (v02 PTL CRESTLN 06040000 00005A52) [...] ACPI: SSDT 0x00000000BB77A000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20060912) [...] ACPI: SSDT 0x00000000BB779000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20060912) [...] ACPI: SSDT 0x00000000BB778000 00049F (v01 PmRef ApTst 00003000 INTL 20060912) [...] ACPI: 6 ACPI AML tables successfully acquired and loaded [...] ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins [...] cpu0 at mainbus0 apid 0 [...] cpu0: Use lfence to serialize rdtsc [...] cpu0: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, id 0x20652 [...] cpu0: node 0, package 0, core 0, smt 0 [...] cpu1 at mainbus0 apid 1 [...] cpu1: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, id 0x20652 [...] cpu1: node 0, package 0, core 0, smt 1 [...] cpu2 at mainbus0 apid 4 [...] cpu2: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, id 0x20652 [...] cpu2: node 0, package 0, core 2, smt 0 [...] cpu3 at mainbus0 apid 5 [...] cpu3: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, id 0x20652 [...] cpu3: node 0, package 0, core 2, smt 1 [...] acpi0 at mainbus0: Intel ACPICA 20221020 [...] acpi0: X/RSDT: OemId <LENOVO,TP-6Q ,00001400>, AslId < LTP,00000000> [...] acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT [...] acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000 [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFF922E40B88808 00042D (v01 PmRef Cpu0Ist 00003000 INTL 20060912) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFF922E40B9A008 0006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20060912) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFF922E40B9C008 000303 (v01 PmRef ApIst 00003000 INTL 20060912) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFF922E40B7A9C8 000119 (v01 PmRef ApCst 00003000 INTL 20060912) [...] acpi0: SCI interrupting at int 9 [...] acpi0: fixed power button present [...] timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 [...] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) [...] timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000 [...] acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0 [...] MEM (PNP0C01) at acpi0 not configured [...] acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch [...] acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button [...] acpivga0 at acpi0 (VID): ACPI Display Adapter [...] acpiout0 at acpivga0 (LCD0, 0x0400): ACPI Display Output Device [...] acpiout0: brightness levels: [2-4,7,9,11,13,17,20,24,28,32,40,50,66,100] [...] acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device [...] acpiout2 at acpivga0 (DVI0, 0x0300): ACPI Display Output Device [...] acpiout3 at acpivga0 (DVI1, 0x0301): ACPI Display Output Device [...] acpiout4 at acpivga0 (DVI2, 0x0302): ACPI Display Output Device [...] acpiout5 at acpivga0 (DVI3, 0x0303): ACPI Display Output Device [...] acpiout6 at acpivga0 (DVI4, 0x0304): ACPI Display Output Device [...] acpiout7 at acpivga0 (DVI5, 0x0305): ACPI Display Output Device [...] acpivga0: connected output devices: [...] acpivga0: 0x0400 (acpiout0): Unknown Output Device, head 0 [...] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0 [...] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 [...] spkr0 at pcppi1: PC Speaker [...] wsbell at spkr0 not configured [...] midi0 at pcppi1: PC speaker [...] sysbeep0 at pcppi1 [...] pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 [...] pckbc2 at acpi0 (MOU, LEN0018) (aux port): irq 12 [...] tpm0 at acpi0 (TPM, SMO1200-1): mem 0xfed40000-0xfed44fff [...] tpm0: device 0x0000104a rev 0x4e [...] acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery [...] acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter [...] thinkpad0 at acpi0 (HKEY, IBM0068) [...] thinkpad0: version 0100 [...] acpiwmi0 at acpi0 (WMI1, PNP0C14-1): ACPI WMI Interface [...] acpiwmibus at acpiwmi0 not configured [...] acpitz0 at acpi0 (THM0): cpu0 cpu1 cpu2 cpu3 [...] acpitz0: levels: critical 100.0 C, passive 91.5 C, passive cooling [...] ACPI: Enabled 3 GPEs in block 00 to 3F [...] attimer1: attached to pcppi1 [...] pckbd0 at pckbc1 (kbd slot) [...] pckbc1: using irq 1 for kbd slot [...] wskbd0 at pckbd0: console keyboard [...] pms0 at pckbc1 (aux slot) [...] pckbc1: using irq 12 for aux slot [...] wsmouse0 at pms0 mux 0 [...] pci0 at mainbus0 bus 0: configuration mode 1 [...] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [...] pchb0 at pci0 dev 0 function 0: Intel Iron Lake Host Bridge (rev. 0x02) [...] agp0 at pchb0: G4X-family chipset [...] agp0: detected 32252k stolen memory [...] agp0: aperture at 0xd0000000, size 0x10000000 [...] i915drmkms0 at pci0 dev 2 function 0: Intel Iron Lake Integrated Graphics Device (rev. 0x02) [...] Intel 3400 MEI (miscellaneous communications, revision 0x06) at pci0 dev 22 function 0 not configured [...] wm0 at pci0 dev 25 function 0, 64-bit DMA: PCH LAN (82577LC) Controller (rev. 0x06) [...] wm0: interrupting at msi0 vec 0 [...] wm0: PCI-Express bus [...] wm0: 2048 words FLASH, version 15.165.15 [...] wm0: RX packet buffer size: 26KB [...] wm0: Ethernet address XXX [...] wm0: 0xa4080<FLASH,PCIE,ASF_FIRM,AMT> [...] ihphy0 at wm0 phy 2: i82577 10/100/1000 media interface, rev. 3 [...] ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [...] ehci0 at pci0 dev 26 function 0: Intel 3400 USB ECHI (rev. 0x06) [...] ehci0: 64-bit DMA [...] ehci0: interrupting at ioapic0 pin 23 [...] ehci0: EHCI version 1.0 [...] ehci0: Using DMA subregion for control data structures [...] usb0 at ehci0: USB revision 2.0 [...] hdaudio0 at pci0 dev 27 function 0: HD Audio Controller [...] hdaudio0: interrupting at msi1 vec 0 [...] hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit [...] hdafg0 at hdaudio0: Conexant CX20585 [...] hdafg0: DAC00 2ch: HP Out [Jack] [...] hdafg0: ADC01 2ch: Mic In [Jack] [...] hdafg0: DAC02 2ch: Speaker [Built-In] [...] hdafg0: ADC03 2ch: Mic In [Built-In] [...] hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz PCM16 PCM20 PCM24 AC3 [...] audio0 at hdafg0: playback, capture, full duplex, independent [...] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback [...] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording [...] spkr1 at audio0: PC Speaker (synthesized) [...] wsbell at spkr1 not configured [...] hdafg1 at hdaudio0: Intel G45 HDMI/4 [...] hdafg1: DP00 8ch: Digital Out [Jack] [...] hdafg1: 8ch/0ch 48000Hz PCM16* [...] audio1 at hdafg1: playback, capture, full duplex, independent [...] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback [...] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording [...] spkr2 at audio1: PC Speaker (synthesized) [...] wsbell at spkr2 not configured [...] ppb0 at pci0 dev 28 function 0: Intel 3400 PCIe (rev. 0x06) [...] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s [...] pci1 at ppb0 bus 13 [...] pci1: i/o space, memory space enabled, rd/line, wr/inv ok [...] ppb1 at pci0 dev 28 function 4: Intel 3400 PCIe (rev. 0x06) [...] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s [...] pci2 at ppb1 bus 2 [...] pci2: i/o space, memory space enabled, rd/line, wr/inv ok [...] iwn0 at pci2 dev 0 function 0: Intel Centrino Advanced-N 6200 (rev. 0x35) [...] iwn0: interrupting at msi2 vec 0 [...] iwn0: MIMO 2T2R, MoW, address XXX [...] ehci1 at pci0 dev 29 function 0: Intel 3400 USB EHCI (rev. 0x06) [...] ehci1: 64-bit DMA [...] ehci1: interrupting at ioapic0 pin 19 [...] ehci1: EHCI version 1.0 [...] ehci1: Using DMA subregion for control data structures [...] usb1 at ehci1: USB revision 2.0 [...] ppb2 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xa6) [...] pci3 at ppb2 bus 14 [...] pci3: i/o space, memory space enabled [...] ichlpcib0 at pci0 dev 31 function 0: Intel QM57 LPC Interface Bridge (rev. 0x06) [...] timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 [...] ichlpcib0: 24-bit timer [...] tco0 at ichlpcib0: TCO (watchdog) timer configured. [...] tco0: Min/Max interval 1/367 seconds [...] ahcisata0 at pci0 dev 31 function 2: Intel 3400 AHCI (rev. 0x06) [...] ahcisata0: 64-bit DMA [...] ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xff20ff65<SXS,EMS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SMPS,SSNTF,SNCQ,S64A> [...] ahcisata0: interrupting at msi3 vec 0 [...] atabus0 at ahcisata0 channel 0 [...] atabus1 at ahcisata0 channel 1 [...] atabus2 at ahcisata0 channel 4 [...] atabus3 at ahcisata0 channel 5 [...] ichsmb0 at pci0 dev 31 function 3: Intel 3400 SMBus (rev. 0x06) [...] ichsmb0: interrupting at ioapic0 pin 23 [...] iic0 at ichsmb0: I2C bus [...] spdmem0 at iic0 addr 0x50: HMT125S6TFR8C-G7 [...] spdmem0: DDR3 SDRAM, no ECC, no temp-sensor, 2GB, 1067MHz (PC3-8533) [...] spdmem0: 14 rows, 10 cols, 8 log. banks, 2 phys. banks, 1.875ns cycle time [...] spdmem0: tAA-tRCD-tRP-tRAS: 7-7-7-20 [...] spdmem0: 1.5V operable [...] spdmem1 at iic0 addr 0x51: EBJ21UE8BDS0-AE-F [...] spdmem1: DDR3 SDRAM, no ECC, no temp-sensor, 2GB, 1067MHz (PC3-8533) [...] spdmem1: 14 rows, 10 cols, 8 log. banks, 2 phys. banks, 1.875ns cycle time [...] spdmem1: tAA-tRCD-tRP-tRAS: 7-7-7-20 [...] spdmem1: 1.5V operable [...] Intel 3400 Thermal (miscellaneous DASP, revision 0x06) at pci0 dev 31 function 6 not configured [...] isa0 at ichlpcib0 [...] pci4 at mainbus0 bus 255 [...] pci4: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [...] pchb1 at pci4 dev 0 function 0: Intel Core QuickPath Generic Non-Core Register (rev. 0x02) [...] pchb2 at pci4 dev 0 function 1: Intel Core i5-600, i3-500 and Pentium 6000 QuickPath Generic System Address Decoder (rev. 0x02) [...] pchb3 at pci4 dev 2 function 0: Intel Core i5-600, i3-500 and Pentium 6000 QPI Link (rev. 0x02) [...] pchb4 at pci4 dev 2 function 1: Intel Core i5-600, i3-500 and Pentium 6000 QPI Physical (rev. 0x02) [...] pchb5 at pci4 dev 2 function 2: Intel Core i5-600, i3-500 and Pentium 6000 Reserved (rev. 0x02) [...] pchb6 at pci4 dev 2 function 3: Intel Core i5-600, i3-500 and Pentium 6000 Reserved (rev. 0x02) [...] acpicpu0 at cpu0: ACPI CPU [...] acpicpu0: C1: FFH, lat 3 us, pow 1000 mW [...] acpicpu0: C2: FFH, lat 205 us, pow 500 mW [...] acpicpu0: C3: FFH, lat 245 us, pow 350 mW, bus master check [...] acpicpu0: P0: FFH, lat 10 us, pow 25000 mW, 2133 MHz [...] acpicpu0: P1: FFH, lat 10 us, pow 23440 mW, 1999 MHz [...] acpicpu0: P2: FFH, lat 10 us, pow 21952 mW, 1866 MHz [...] acpicpu0: P3: FFH, lat 10 us, pow 20472 mW, 1733 MHz [...] acpicpu0: P4: FFH, lat 10 us, pow 19025 mW, 1599 MHz [...] acpicpu0: P5: FFH, lat 10 us, pow 17604 mW, 1466 MHz [...] acpicpu0: P6: FFH, lat 10 us, pow 16232 mW, 1333 MHz [...] acpicpu0: P7: FFH, lat 10 us, pow 14869 mW, 1199 MHz [...] acpicpu0: P8: FFH, lat 10 us, pow 13565 mW, 1066 MHz [...] acpicpu0: P9: FFH, lat 10 us, pow 12259 mW, 933 MHz [...] acpicpu0: T0: FFH, lat 1 us, pow 12259 mW, 100 % [...] acpicpu0: T1: FFH, lat 1 us, pow 10726 mW, 88 % [...] acpicpu0: T2: FFH, lat 1 us, pow 9194 mW, 75 % [...] acpicpu0: T3: FFH, lat 1 us, pow 7661 mW, 63 % [...] acpicpu0: T4: FFH, lat 1 us, pow 6129 mW, 50 % [...] acpicpu0: T5: FFH, lat 1 us, pow 4597 mW, 38 % [...] acpicpu0: T6: FFH, lat 1 us, pow 3064 mW, 25 % [...] acpicpu0: T7: FFH, lat 1 us, pow 1532 mW, 13 % [...] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105 [...] acpicpu1 at cpu1: ACPI CPU [...] acpicpu2 at cpu2: ACPI CPU [...] coretemp1 at cpu2: thermal sensor, 1 C resolution, Tjmax=105 [...] acpicpu3 at cpu3: ACPI CPU [...] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [...] timecounter: Timecounter "TSC" frequency 2128001000 Hz quality 3000 [...] acpiacad0: AC adapter online. [...] IPsec: Initialized Security Association Processing. [...] acpibat0: SANYO LION rechargeable battery [...] acpibat0: granularity: low->warn 0.001 Ah, warn->full 0.001 Ah [...] uhub0 at usb1: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [...] uhub0: 3 ports with 3 removable, self powered [...] uhub1 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [...] uhub1: 3 ports with 3 removable, self powered [...] ahcisata0 port 0: device present, speed: 3.0Gb/s [...] uhub2 at uhub0 port 1: vendor 8087 (0x8087) product 0020 (0x0020), class 9/0, rev 2.00/0.00, addr 2 [...] uhub2: single transaction translator [...] uhub3 at uhub1 port 1: vendor 8087 (0x8087) product 0020 (0x0020), class 9/0, rev 2.00/0.00, addr 2 [...] uhub3: single transaction translator [...] uhub3: 6 ports with 6 removable, self powered [...] uhub2: 8 ports with 8 removable, self powered [...] wd0 at atabus0 drive 0 [...] wd0: <TS256GSSD230S> [...] wd0: drive supports 2-sector PIO transfers, LBA48 addressing [...] wd0: 238 GB, 496149 cyl, 16 head, 63 sec, 512 bytes/sect x 500118192 sectors [...] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) [...] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) [...] umass0 at uhub2 port 2 configuration 1 interface 0 [...] umass0: VLI manufacture String (0x2109) VLI Product String (0x0711), rev 2.10/1.44, addr 3 [...] umass0: using SCSI over Bulk-Only [...] scsibus0 at umass0: 2 targets, 1 lun per target [...] uhub4 at uhub3 port 1: vendor 0a05 (0x0a05) USB2.0 HUB (0x7211), class 9/0, rev 2.00/1.00, addr 3 [...] uhub4: 4 ports with 4 removable, self powered [...] sd0 at scsibus0 target 0 lun 0: <SAMSUNG, MZ7TD128HAFV, DXT0> disk fixed [...] sd0: fabricating a geometry [...] sd0: 119 GB, 122104 cyl, 64 head, 32 sec, 512 bytes/sect x 250069676 sectors [...] sd0: fabricating a geometry [...] sd0: GPT GUID: HASH_196-43EC-685D-4B46-727DFD543F51 [...] dk0 at sd0: "cgd.conf", 262144 blocks at 4096, type: ffs [...] dk1 at sd0: "syscgd", 167772160 blocks at 266240, type: cgd [...] dk2 at sd0: "HASH_E4D-82EB-72D6-09A1-5AA77BF08999", 31248384 blocks at 168038400, type: ntfs [...] ure0 at uhub4 port 2 [...] ure0: Realtek (0x0bda) USB 10/100/1000 LAN (0x8153), rev 2.10/30.00, addr 4 [...] ure0: RTL8153 ver 5c30 [...] rgephy0 at ure0 phy 0: RTL8251 1000BASE-T media interface, rev. 0 [...] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto [...] ure0: Ethernet address XXX [...] uhidev0 at uhub4 port 3 configuration 1 interface 0 [...] uhidev0: A4Tech (0x09da) USB Mouse (0xc10a), rev 1.10/10.32, addr 5, iclass 3/1 [...] uhidev0: 4 report ids [...] ums0 at uhidev0 reportid 1: 8 buttons and Z dir [...] wsmouse1 at ums0 mux 0 [...] uhid0 at uhidev0 reportid 4: input=5, output=0, feature=0 [...] uvideo0 at uhub3 port 6 configuration 1 interface 0: Chicony Electronics Co., Ltd. (0x17ef) Integrated Camera (0x4816), rev 2.00/23.45, addr 6 [...] video0 at uvideo0: Chicony Electronics Co., Ltd. (0x17ef) Integrated Camera (0x4816), rev 2.00/23.45, addr 6 [...] swwdog0: software watchdog initialized [...] boot device: sd0 [...] md0: internal 5000 KB image area [...] root on md0a dumps on md0b [...] root file system type: ffs [...] kern.module.path=/stand/amd64/10.1/modules [...] WARNING: clock gained 84 days [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] i915drmkms0: interrupting at msi4 vec 0 (i915drmkms0) [...] [drm] Initialized i915 1.6.0 20200114 for i915drmkms0 on minor 0 [...] intelfb0 at i915drmkms0 [...] [drm] DRM_I915_DEBUG enabled [...] [drm] DRM_I915_DEBUG_GEM enabled [...] intelfb0: framebuffer at 0xd0010000, size 1280x800, depth 32, stride 5120 [...] wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0 [...] wsmux1: connecting to wsdisplay0 [...] entropy: best effort [...] wsdisplay0: screen 1 added (default, vt100 emulation) [...] wsdisplay0: screen 2 added (default, vt100 emulation) [...] wsdisplay0: screen 3 added (default, vt100 emulation) [...] wsdisplay0: screen 4 added (default, vt100 emulation)