[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p1 stable/25.1-n269632-cc316253c68 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Pentium(R) CPU G3220 @ 3.00GHz (2993.20-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ddaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x2603<FSGSBASE,TSCADJ,ERMS,INVPCID,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3987554304 (3802 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: No AES or SHA support. [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] Event timer "HPET5" frequency 14318180 Hz quality 440 [...] Event timer "HPET6" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf0000000-0xf03fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf0634000-0xf0637fff irq 16 at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf0620000-0xf062ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) I217-V LPT> port 0xf080-0xf09f mem 0xf0600000-0xf061ffff,0xf063d000-0xf063dfff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.13-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf063c000-0xf063c3ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xf0630000-0xf0633fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] alc0: <Atheros AR8161 PCIe Gigabit Ethernet> port 0xe000-0xe07f mem 0xf0500000-0xf053ffff irq 19 at device 0.0 on pci2 [...] alc0: 11776 Tx FIFO, 12032 Rx FIFO [...] alc0: Using 1 MSIX message(s). [...] miibus0: <MII bus> on alc0 [...] atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0 [...] atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] alc0: Using defaults for TSO: 65518/35/2048 [...] alc0: Ethernet address: ... [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] iwn0: <Intel Centrino Wireless-N 2230> mem 0xf0400000-0xf0401fff irq 16 at device 0.0 on pci3 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf063b000-0xf063b3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf063a000-0xf063a7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1496534527 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC892 HDA CODEC> at cad 2 on hdac1 [...] hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC892 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1 [...] pcm2: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm3: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa1 [...] pcm4: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub0 on usbus2 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub1 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub2 on usbus1 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ada0 at ahcich3 bus 0 scbus0 target 0 lun 0 [...] ada0: <HS-SSD-E100 128G SN09405> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 03', SATA Slot: scbus0 target 0 [...] uhub2: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 21 ports with 21 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] ugen0.2: <Logitech USB Keyboard> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <Logitech USB Keyboard, class 0/0, rev 1.10/49.20, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub3 on uhub2 [...] uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 [...] uhub3: 6 ports with 6 removable, self powered [...] ugen0.3: <vendor 0x8087 product 0x07da> at usbus0 [...] uhub4: 8 ports with 8 removable, self powered