[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p6 stable/24.7-n267939-fd5bc7f34e1 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU microcode: no matching update found [...] CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (1995.11-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x40fb2 Family=0xf Model=0x4b Stepping=2 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x2001<SSE3,CX16> [...] AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> [...] AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8> [...] SVM: (disabled in BIOS) NAsids=64 [...] real memory = 4296015872 (4097 MB) [...] avail memory = 4037320704 (3850 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <COMPAQ HP_RS485> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.1> irqs 0-23 [...] Launching APs: 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf9c00-0xf9c1e [...] smbios0: Version: 2.4, BCD Revision: 2.4 [...] aesni0: No AES or SHA support. [...] acpi0: <HPQOEM SLIC-BPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] hpet1: memory region width 1024 too small for 32 timers [...] device_attach: hpet1 attach returned 6 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] hpet0: memory region width 1024 too small for 32 timers [...] device_attach: hpet0 attach returned 6 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] Firmware Error (ACPI): \134_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20221020/nsarguments-311) [...] Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20221020/dsfield-352) [...] ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20221020/dswload2-639) [...] ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20221020/psparse-689) [...] pcib0: _OSC failed: AE_ALREADY_EXISTS [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0x3100-0x31ff mem 0xda000000-0xdbffffff,0xde500000-0xde50ffff irq 17 at device 5.0 on pci1 [...] vgapci0: Boot video device [...] vgapci1: <VGA-compatible display> mem 0xdc000000-0xddffffff,0xde510000-0xde51ffff at device 5.1 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2100-0x21ff mem 0xdf000000-0xdf000fff,0xdea00000-0xdea03fff irq 18 at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x2c000000 [...] re0: MAC rev. 0x00200000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x00a002> mem 0xde400000-0xde40ffff irq 19 at device 0.0 on pci3 [...] bge0: CHIP ID 0x0000a002; ASIC REV 0x0a; CHIP REV 0xa0; PCI-E [...] miibus1: <MII bus> on bge0 [...] brgphy0: <BCM5755 1000BASE-T media interface> PHY 1 on miibus1 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Using defaults for TSO: 65518/35/2048 [...] bge0: Ethernet address: ... [...] ahci0: <AMD SB600 AHCI SATA controller> port 0x4130-0x4137,0x4150-0x4153,0x4138-0x413f,0x4154-0x4157,0x4100-0x410f mem 0xdeb07000-0xdeb073ff irq 22 at device 18.0 on pci0 [...] ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x7000<NOMSI,ATI_PMP_BUG,MAXIO_64K> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ohci0: <OHCI (generic) USB controller> mem 0xdeb04000-0xdeb04fff irq 16 at device 19.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ohci1: <OHCI (generic) USB controller> mem 0xdeb05000-0xdeb05fff irq 17 at device 19.1 on pci0 [...] usbus1 on ohci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ohci2: <OHCI (generic) USB controller> mem 0xdeb06000-0xdeb06fff irq 18 at device 19.2 on pci0 [...] usbus2 on ohci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdeb07800-0xdeb078ff irq 19 at device 19.5 on pci0 [...] ehci0: AMD SB600/700 quirk applied [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] atapci0: <ATI IXP600 UDMA133 controller> port 0x4140-0x4147,0x4158-0x415b,0x4148-0x414f,0x415c-0x415f,0x4120-0x412f irq 16 at device 20.1 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci0 [...] hdac0: <ATI SB600 HDA Controller> mem 0xdeb00000-0xdeb03fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] rl0: <D-Link DFE-530TX+ 10/100BaseTX> port 0x1100-0x11ff mem 0xdf100000-0xdf1000ff irq 21 at device 9.0 on pci4 [...] miibus2: <MII bus> on rl0 [...] rlphy0: <RealTek internal media interface> PHY 0 on miibus2 [...] rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] rl0: Ethernet address: ... [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0. [...] psm0: model IntelliMouse Explorer, device ID 4 [...] fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 [...] fdc0: does not respond [...] device_attach: fdc0 attach returned 6 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcffff pnpid ORM0000 on isa0 [...] fdc0: No FDOUT register! [...] powernow0: <PowerNow! K8> on cpu0 [...] Timecounters tick every 1.000 msec [...] ugen2.1: <ATI OHCI root HUB> at usbus2 [...] ugen3.1: <ATI EHCI root HUB> at usbus3 [...] uhub0 on usbus2 [...] uhub1 on usbus3 [...] uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] ugen1.1: <ATI OHCI root HUB> at usbus1 [...] ugen0.1: <ATI OHCI root HUB> at usbus0 [...] uhub2 on usbus1 [...] uhub3 on usbus0 [...] uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Realtek ALC260 HDA CODEC> at cad 3 on hdac0 [...] hdaa0: <Realtek ALC260 Audio Function Group> at nid 1 on hdacc0 [...] hdaa0: hdaa_audio_as_parse: Duplicate pin 0 (21) in association 1! Disabling association. [...] pcm0: <Realtek ALC260 (Analog)> at nid 15,19,20 on hdaa0 [...] uhub3: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] Trying to mount root from zfs:zroot/ROOT/20241105141316-prerestore []... [...] (aprobe0:ahcich0:0:15:0): NOP FLUSHQUEUE. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 [...] (aprobe0:ahcich0:0:15:0): CAM status: Command timeout [...] (aprobe0:ahcich0:0:15:0): Error 5, Retries exhausted [...] (aprobe0:ahcich0:0:15:0): NOP FLUSHQUEUE. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 [...] (aprobe0:ahcich0:0:15:0): CAM status: Command timeout [...] (aprobe0:ahcich0:0:15:0): Error 5, Retries exhausted [...] (aprobe1:ahcich1:0:15:0): NOP FLUSHQUEUE. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 [...] (aprobe1:ahcich1:0:15:0): CAM status: Command timeout [...] (aprobe1:ahcich1:0:15:0): Error 5, Retries exhausted [...] (aprobe1:ahcich1:0:15:0): NOP FLUSHQUEUE. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 [...] (aprobe1:ahcich1:0:15:0): CAM status: Command timeout [...] (aprobe1:ahcich1:0:15:0): Error 5, Retries exhausted [...] (aprobe2:ahcich2:0:15:0): NOP FLUSHQUEUE. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 [...] (aprobe2:ahcich2:0:15:0): CAM status: Command timeout [...] (aprobe2:ahcich2:0:15:0): Error 5, Retries exhausted [...] (aprobe2:ahcich2:0:15:0): NOP FLUSHQUEUE. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 [...] (aprobe2:ahcich2:0:15:0): CAM status: Command timeout [...] (aprobe2:ahcich2:0:15:0): Error 5, Retries exhausted [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST3160812AS 3.AHL> ATA-7 SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada0: 152627MB (312581808 512 byte sectors) [...] ada1 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada1: <ST3160812AS 3.AHL> ATA-7 SATA 2.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada1: 152627MB (312581808 512 byte sectors) [...] Root mount waiting for: usbus3 cd [...] Root mount waiting for: usbus3 cd [...] Root mount waiting for: usbus3 cd [...] uhub1: 10 ports with 10 removable, self powered [...] Root mount waiting for: cd [...] Root mount waiting for: cd [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <HL-DT-ST DVD+-RW GSA-H31L 1.05> Removable CD-ROM SCSI device [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present