[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE stable/25.1-n269614-36155813721 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 1280x1024 [...] CPU: Intel(R) Core(TM) i5-8500 CPU @ 3.00GHz (3000.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xa000c04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33109606400 (31575 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM 83F2 > [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 3 2 5 1 4 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x9aef7000-0x9aef701e [...] smbios0: Version: 3.1, BCD Revision: 3.1 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-BPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] ixl0: <Intel(R) Ethernet Controller X710 for 10GBASE-T - 2.3.3-k> mem 0xc3000000-0xc3ffffff,0xc4018000-0xc401ffff at device 0.0 on pci1 [...] ixl0: fw 8.13.63341 api 1.12 nvm 8.15 etid 80009695 oem 1.267.0 [...] ixl0: PF-ID[0]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, MDIO shared [...] ixl0: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl0: Using 6 RX queues 6 TX queues [...] ixl0: Using MSI-X interrupts with 7 vectors [...] ixl0: Ethernet address: ... [...] ixl0: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl0: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl0: SR-IOV ready [...] ixl0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ixl1: <Intel(R) Ethernet Controller X710 for 10GBASE-T - 2.3.3-k> mem 0xc2000000-0xc2ffffff,0xc4010000-0xc4017fff at device 0.1 on pci1 [...] ixl1: fw 8.13.63341 api 1.12 nvm 8.15 etid 80009695 oem 1.267.0 [...] ixl1: PF-ID[1]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, MDIO shared [...] ixl1: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl1: Using 6 RX queues 6 TX queues [...] ixl1: Using MSI-X interrupts with 7 vectors [...] ixl1: Ethernet address: ... [...] ixl1: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl1: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl1: SR-IOV ready [...] ixl1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ixl2: <Intel(R) Ethernet Controller X710 for 10GBASE-T - 2.3.3-k> mem 0xc1000000-0xc1ffffff,0xc4008000-0xc400ffff at device 0.2 on pci1 [...] ixl2: fw 8.13.63341 api 1.12 nvm 8.15 etid 80009695 oem 1.267.0 [...] ixl2: PF-ID[2]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, MDIO shared [...] ixl2: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl2: Using 6 RX queues 6 TX queues [...] ixl2: Using MSI-X interrupts with 7 vectors [...] ixl2: Ethernet address: ... [...] ixl2: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl2: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl2: SR-IOV ready [...] ixl2: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ixl3: <Intel(R) Ethernet Controller X710 for 10GBASE-T - 2.3.3-k> mem 0xc0000000-0xc0ffffff,0xc4000000-0xc4007fff at device 0.3 on pci1 [...] ixl3: fw 8.13.63341 api 1.12 nvm 8.15 etid 80009695 oem 1.267.0 [...] ixl3: PF-ID[3]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, MDIO shared [...] ixl3: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl3: Using 6 RX queues 6 TX queues [...] ixl3: Using MSI-X interrupts with 7 vectors [...] ixl3: Ethernet address: ... [...] ixl3: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl3: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl3: SR-IOV ready [...] ixl3: netmap queues/slots: TX 6/1024, RX 6/1024 [...] vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0xc5000000-0xc5ffffff,0xb0000000-0xbfffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0xc6200000-0xc620ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x4080-0x4087,0x4088-0x408b,0x4060-0x407f mem 0xc6210000-0xc6211fff,0xc6216000-0xc62160ff,0xc6215000-0xc62157ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] ahciem0: EM timeout [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme0: <Generic NVMe Device> mem 0xc6100000-0xc6103fff at device 0.0 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xc6004000-0xc6004fff,0xc6000000-0xc6003fff at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Coffee Lake HDA Controller> mem 0x4000100000-0x4000103fff,0x4000000000-0x40000fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] Timecounter "TSC-low" frequency 1499999673 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] hdacc0: <Conexant CX20632 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Conexant CX20632 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Conexant CX20632 (Analog 4ch/2.0)> at nid 28,31 and 26 on hdaa0 [...] pcm1: <Conexant CX20632 (Analog)> at nid 25 and 29 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] nda0 at nvme0 bus 0 scbus3 target 0 lun 1 [...] nda0: <SSDPEMKF512G8 NVMe INTEL 512GB 7004 PHHP929200H8512C> [...] nda0: Serial Number... [...] nda0: nvme version 1.3 [...] nda0: 488386MB (1000215216 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 [...] uhub0: 22 ports with 22 removable, self powered [...] ixl0: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: CL74 FC-FEC/BASE-R, Autoneg: True, Flow Control: N [...] ixl0: link state changed to UP [...] one [...] ugen0.2: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/24.11, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] pid 30 (zpool) is attempting to use unsafe AIO requests - not logging anymore [...] ixl1: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: CL74 FC-FEC/BASE-R, Autoneg: True, Flow Control: N [...] ixl1: link state changed to UP [...] one [...] re0: link state changed to DOWN [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMIB.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WMIV.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: Embedded MOF found [...] pchtherm0: <CannonLake-H Thermal Subsystem> mem 0x4000107000-0x4000107fff at device 18.0 on pci0 [...] ichsmb0: <Intel Cannon Lake SMBus controller> port 0xefa0-0xefbf mem 0x4000104000-0x40001040ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] ums0 on uhub0 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/24.11, addr 1> on usbus0 [...] ums0: 16 buttons and [XYZT] coordinates ID=2 [...] uhid0 on uhub0 [...] uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/24.11, addr 1> on usbus0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] ixl1: link state changed to DOWN [...] ixl0: link state changed to DOWN [...] ixl0: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: CL74 FC-FEC/BASE-R, Autoneg: True, Flow Control: None [...] ixl0: link state changed to UP [...] ixl1: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: CL74 FC-FEC/BASE-R, Autoneg: True, Flow Control: None [...] ixl1: link state changed to UP [...] ixl1: link state changed to DOWN [...] ixl1: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: CL74 FC-FEC/BASE-R, Autoneg: True, Flow Control: None [...] ixl1: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 10m3s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p3 stable/25.1-n269769-0381600e81a4 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 1280x1024 [...] CPU: Intel(R) Core(TM) i5-8500 CPU @ 3.00GHz (3000.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xa000c04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33109590016 (31575 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM 83F2 > [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 2 3 5 4 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x9aef7000-0x9aef701e [...] smbios0: Version: 3.1, BCD Revision: 3.1 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-BPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] ixl0: <Intel(R) Ethernet Controller X710 for 10GBASE-T - 2.3.3-k> mem 0xc3000000-0xc3ffffff,0xc4018000-0xc401ffff at device 0.0 on pci1 [...] ixl0: fw 8.13.63341 api 1.12 nvm 8.15 etid 80009695 oem 1.267.0 [...] ixl0: PF-ID[0]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, MDIO shared [...] ixl0: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl0: Using 6 RX queues 6 TX queues [...] ixl0: Using MSI-X interrupts with 7 vectors [...] ixl0: Ethernet address: ... [...] ixl0: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl0: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl0: SR-IOV ready [...] ixl0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ixl1: <Intel(R) Ethernet Controller X710 for 10GBASE-T - 2.3.3-k> mem 0xc2000000-0xc2ffffff,0xc4010000-0xc4017fff at device 0.1 on pci1 [...] ixl1: fw 8.13.63341 api 1.12 nvm 8.15 etid 80009695 oem 1.267.0 [...] ixl1: PF-ID[1]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, MDIO shared [...] ixl1: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl1: Using 6 RX queues 6 TX queues [...] ixl1: Using MSI-X interrupts with 7 vectors [...] ixl1: Ethernet address: ... [...] ixl1: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl1: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl1: SR-IOV ready [...] ixl1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ixl2: <Intel(R) Ethernet Controller X710 for 10GBASE-T - 2.3.3-k> mem 0xc1000000-0xc1ffffff,0xc4008000-0xc400ffff at device 0.2 on pci1 [...] ixl2: fw 8.13.63341 api 1.12 nvm 8.15 etid 80009695 oem 1.267.0 [...] ixl2: PF-ID[2]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, MDIO shared [...] ixl2: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl2: Using 6 RX queues 6 TX queues [...] ixl2: Using MSI-X interrupts with 7 vectors [...] ixl2: Ethernet address: ... [...] ixl2: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl2: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl2: SR-IOV ready [...] ixl2: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ixl3: <Intel(R) Ethernet Controller X710 for 10GBASE-T - 2.3.3-k> mem 0xc0000000-0xc0ffffff,0xc4000000-0xc4007fff at device 0.3 on pci1 [...] ixl3: fw 8.13.63341 api 1.12 nvm 8.15 etid 80009695 oem 1.267.0 [...] ixl3: PF-ID[3]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, MDIO shared [...] ixl3: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl3: Using 6 RX queues 6 TX queues [...] ixl3: Using MSI-X interrupts with 7 vectors [...] ixl3: Ethernet address: ... [...] ixl3: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl3: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl3: SR-IOV ready [...] ixl3: netmap queues/slots: TX 6/1024, RX 6/1024 [...] vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0xc5000000-0xc5ffffff,0xb0000000-0xbfffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0xc6200000-0xc620ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x4080-0x4087,0x4088-0x408b,0x4060-0x407f mem 0xc6210000-0xc6211fff,0xc6216000-0xc62160ff,0xc6215000-0xc62157ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] ahciem0: EM timeout [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme0: <Generic NVMe Device> mem 0xc6100000-0xc6103fff at device 0.0 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xc6004000-0xc6004fff,0xc6000000-0xc6003fff at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Coffee Lake HDA Controller> mem 0x4000100000-0x4000103fff,0x4000000000-0x40000fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] Timecounter "TSC-low" frequency 1499999170 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Conexant CX20632 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Conexant CX20632 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Conexant CX20632 (Analog 4ch/2.0)> at nid 28,31 and 26 on hdaa0 [...] pcm1: <Conexant CX20632 (Analog)> at nid 25 and 29 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] nda0 at nvme0 bus 0 scbus3 target 0 lun 1 [...] nda0: <SSDPEMKF512G8 NVMe INTEL 512GB 7004 PHHP929200H8512C> [...] nda0: Serial Number... [...] nda0: nvme version 1.3 [...] nda0: 488386MB (1000215216 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 22 ports with 22 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/24.11, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] pid 30 (zpool) is attempting to use unsafe AIO requests - not logging anymore