[...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE-p1 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(efifb): resolution 1024x768 [...] CPU: AMD Ryzen 5 3600X 6-Core Processor (4000.08-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x870f10 Family=0x17 Model=0x71 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,<b30>> [...] Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA> [...] Structured Extended Features2=0x400004<UMIP,RDPID> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x10cb657<CLZERO,IRPerf,XSaveErPtr> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16529661952 (15763 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 cache groups x 3 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] ioapic1 <Version 2.1> irqs 24-55 on motherboard [...] Launching APs: 9 8 11 10 6 1 7 3 2 4 5 [...] Timecounter "TSC-low" frequency 2000037820 Hz quality 1000 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] 000.000023 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] acpi0: Power Button (fixed) [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcba0000-0xfcba7fff at device 0.0 on pci1 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AHCI SATA controller> mem 0xfcb80000-0xfcb9ffff at device 0.1 on pci1 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 0.2 on pci1 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci2 [...] pci4: <ACPI PCI bus> on pcib4 [...] nvme0: <Generic NVMe Device> mem 0xfca00000-0xfca03fff,0xfca04000-0xfca040ff at device 0.0 on pci4 [...] pcib5: <ACPI PCI-PCI bridge> at device 8.0 on pci2 [...] pci5: <ACPI PCI bus> on pcib5 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfc900000-0xfc900fff,0xe0300000-0xe0303fff at device 0.0 on pci5 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x2c000000 [...] re0: MAC rev. 0x00200000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib6: <ACPI PCI-PCI bridge> at device 9.0 on pci2 [...] pci6: <ACPI PCI bus> on pcib6 [...] pci6: <network, ethernet> at device 0.0 (no driver attached) [...] pcib7: <ACPI PCI-PCI bridge> at device 3.1 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfcf00000-0xfcf3ffff at device 0.0 on pci7 [...] hdac0: <ATI (0xaae0) HDA Controller> mem 0xfcf60000-0xfcf63fff at device 0.1 on pci7 [...] pcib8: <ACPI PCI-PCI bridge> at device 7.1 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] pci8: <unknown> at device 0.0 (no driver attached) [...] pcib9: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] pci9: <unknown> at device 0.0 (no driver attached) [...] pci9: <encrypt/decrypt> at device 0.1 (no driver attached) [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfcc00000-0xfccfffff at device 0.3 on pci9 [...] xhci1: 64 bytes context size, 64-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] hdac1: <AMD X570 HDA Controller> mem 0xfce00000-0xfce07fff at device 0.4 on pci9 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] uart2: <16x50 with 256 byte FIFO> iomem 0xfedc9000-0xfedc9fff,0xfedc7000-0xfedc7fff irq 3 on acpi0 [...] uart3: <16x50 with 256 byte FIFO> iomem 0xfedca000-0xfedcafff,0xfedc8000-0xfedc8fff irq 4 on acpi0 [...] uart4: <16x50 with 256 byte FIFO> iomem 0xfedce000-0xfedcefff,0xfedcc000-0xfedccfff irq 3 on acpi0 [...] uart5: <16x50 with 256 byte FIFO> iomem 0xfedcf000-0xfedcffff,0xfedcd000-0xfedcdfff irq 4 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x1022 XHCI root HUB> at usbus0 [...] ugen1.1: <0x1022 XHCI root HUB> at usbus1 [...] uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] nvme0: Allocated 200MB host memory buffer [...] uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <WDC WDS500G2B0C-00PXH0> NVMe namespace [...] nvd0: 476940MB (976773168 512 byte sectors) [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0 [...] hdacc1: <Realtek ALCS1200A HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALCS1200A Audio Function Group> at nid 1 on hdacc1 [...] pcm5: <Realtek ALCS1200A (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1 [...] pcm6: <Realtek ALCS1200A (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm7: <Realtek ALCS1200A (Rear Digital)> at nid 30 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 CAM usbus1 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <WDC WD20SPZX-22UA7T0 01.01A01> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 1907729MB (3907029168 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <SanDisk SSD G5 BICS4 415000WD> ACS-4 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 953869MB (1953525168 512 byte sectors) [...] ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada2: <WDC WD20SPZX-22UA7T0 01.01A01> ACS-3 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 1907729MB (3907029168 512 byte sectors) [...] ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada3: <SanDisk SSD G5 BICS4 415000WD> ACS-4 ATA SATA 3.x device [...] ada3: Serial Number... [...] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada3: Command Queueing enabled [...] ada3: 953869MB (1953525168 512 byte sectors) [...] uhub0: 8 ports with 8 removable, self powered [...] uhub1: 14 ports with 14 removable, self powered [...] ugen0.2: <AsusTek Computer Inc. AURA LED Controller> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.3: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.60, addr 2> on usbus0 [...] uhub2: MTT enabled [...] Root mount waiting for: usbus0 [...] uhub2: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.4: <Razer Razer DeathAdder Essential White Edition> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <Razer Razer DeathAdder Essential White Edition, class 0/0, rev 2.00/2.00, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] ukbd1 on uhub1 [...] ukbd1: <Razer Razer DeathAdder Essential White Edition, class 0/0, rev 2.00/2.00, addr 3> on usbus0 [...] kbd3 at ukbd1 [...] ugen0.5: <Logitech Logi TKL Mechanical Keyboard> at usbus0 [...] ukbd2 on uhub1 [...] ukbd2: <Logitech Logi TKL Mechanical Keyboard, class 0/0, rev 2.00/56.00, addr 4> on usbus0 [...] kbd4 at ukbd2 [...] ukbd3 on uhub1 [...] ukbd3: <Logitech Logi TKL Mechanical Keyboard, class 0/0, rev 2.00/56.00, addr 4> on usbus0 [...] kbd5 at ukbd3 [...] Root mount waiting for: usbus0 [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] uhid0 on uhub1 [...] uhid0: <AsusTek Computer Inc. AURA LED Controller, class 0/0, rev 2.00/1.00, addr 1> on usbus0 [...] ums0 on uhub1 [...] ums0: <Razer Razer DeathAdder Essential White Edition, class 0/0, rev 2.00/2.00, addr 3> on usbus0 [...] ums0: 5 buttons and [XYZ] coordinates ID=0 [...] uhid1 on uhub1 [...] uhid1: <Logitech Logi TKL Mechanical Keyboard, class 0/0, rev 2.00/56.00, addr 4> on usbus0 [...] re0: link state changed to UP [...] Security policy loaded: MAC/ntpd (mac_ntpd)