[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p2 stable/25.1-n269753-d27208952e13 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(vga): resolution 640x480 [...] CPU microcode: updated from 0x27 to 0x28 [...] CPU: Intel(R) Core(TM) i3-4370T CPU @ 3.30GHz (3300.10-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8244490240 (7862 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 2 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf04d0-0xf04ee [...] smbios0: Version: 2.8, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <processor> at device 0.0 (no driver attached) [...] pci1: <network, ethernet> at device 0.1 (no driver attached) [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7f04000-0xf7f043ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb0: <Intel(R) I210 (Copper)> port 0xd000-0xd01f mem 0xf7c00000-0xf7cfffff,0xf7d00000-0xf7d03fff irq 16 at device 0.0 on pci3 [...] igb0: EEPROM V3.25-0 eTrack 0x800005cd [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb1: <Intel(R) I210 (Copper)> port 0xc000-0xc01f mem 0xf7900000-0xf79fffff,0xf7a00000-0xf7a03fff irq 17 at device 0.0 on pci4 [...] igb1: EEPROM V3.25-0 eTrack 0x800005cd [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igb2: <Intel(R) I210 (Copper)> port 0xb000-0xb01f mem 0xf7600000-0xf76fffff,0xf7700000-0xf7703fff irq 18 at device 0.0 on pci5 [...] igb2: EEPROM V3.25-0 eTrack 0x800005cd [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igb3: <Intel(R) I210 (Copper)> port 0xa000-0xa01f mem 0xf7300000-0xf73fffff,0xf7400000-0xf7403fff irq 19 at device 0.0 on pci6 [...] igb3: EEPROM V3.25-0 eTrack 0x800005cd [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] igb4: <Intel(R) I210 (Copper)> port 0x9000-0x901f mem 0xf7000000-0xf70fffff,0xf7100000-0xf7103fff irq 16 at device 0.0 on pci7 [...] igb4: EEPROM V3.25-0 eTrack 0x800005cd [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 2 RX queues 2 TX queues [...] igb4: Using MSI-X interrupts with 3 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib8: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] igb5: <Intel(R) I210 (Copper)> port 0x8000-0x801f mem 0xf6d00000-0xf6dfffff,0xf6e00000-0xf6e03fff irq 17 at device 0.0 on pci8 [...] igb5: EEPROM V3.25-0 eTrack 0x800005cd [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 2 RX queues 2 TX queues [...] igb5: Using MSI-X interrupts with 3 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib9: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] igb6: <Intel(R) I210 (Fiber)> port 0x7000-0x701f mem 0xf6a00000-0xf6afffff,0xf6b00000-0xf6b03fff irq 18 at device 0.0 on pci9 [...] igb6: EEPROM V3.25-0 eTrack 0x800005d2 [...] igb6: Using 1024 TX descriptors and 1024 RX descriptors [...] igb6: Using 2 RX queues 2 TX queues [...] igb6: Using MSI-X interrupts with 3 vectors [...] igb6: Ethernet address: ... [...] igb6: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib10: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] igb7: <Intel(R) I210 (Fiber)> port 0x6000-0x601f mem 0xf6700000-0xf67fffff,0xf6800000-0xf6803fff irq 19 at device 0.0 on pci10 [...] igb7: EEPROM V3.25-0 eTrack 0x800005d2 [...] igb7: Using 1024 TX descriptors and 1024 RX descriptors [...] igb7: Using 2 RX queues 2 TX queues [...] igb7: Using MSI-X interrupts with 3 vectors [...] igb7: Ethernet address: ... [...] igb7: netmap queues/slots: TX 2/1024, RX 2/1024 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7f03000-0xf7f033ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf7f02000-0xf7f027ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] ppc0: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1649998440 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ada0 at ahcich2 bus 0 scbus0 target 0 lun 0 [...] ada0: <JAJS600M128C T1125A0> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 02', SATA Slot: scbus0 target 0 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] ugen0.2: <vendor 0x8087 product 0x8008> at usbus0 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus0 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub2: 8 ports with 8 removable, self powered