[...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE r366954 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i5-2537M CPU @ 1.40GHz (1396.86-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1dbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 7956987904 (7588 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <SECCSD LH43STAR> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] arc4random: no preloaded entropy cache [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 2 3 [...] Timecounter "TSC" frequency 1396856376 Hz quality 1000 [...] random: entropy device external interface [...] md0: Preloaded image </data/XXXXXXXXXXXX 14385152 bytes at 0xffffffff828820c8 [...] 000.000054 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 [...] kbd1 at kbdmux0 [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <SECCSD LH43STAR> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xf0000000-0xf03fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf0600000-0xf060ffff irq 21 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf061a000-0xf061a3ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Panther Point HDA Controller> mem 0xf0610000-0xf0613fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] iwn0: <Intel Centrino Advanced 6235> mem 0xf0500000-0xf0501fff irq 16 at device 0.0 on pci1 [...] arc4random: no preloaded entropy cache [...] pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xf0404000-0xf0404fff,0xf0400000-0xf0403fff irq 19 at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x2c800000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf0619000-0xf06193ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Panther Point AHCI SATA controller> port 0x3088-0x308f,0x3094-0x3097,0x3080-0x3087,0x3090-0x3093,0x3060-0x307f mem 0xf0618000-0xf06187ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] psm0: model Elantech Touchpad, device ID 0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior. [...] Consider tuning vm.kmem_size and vm.kmem_size_max [...] in /boot/loader.conf. [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] arc4random: no preloaded entropy cache [...] hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] pcm0: <Realtek ALC269 (Analog)> at nid 20 and 24 on hdaa0 [...] pcm1: <Realtek ALC269 (Analog)> at nid 21 and 25 on hdaa0 [...] hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0 [...] hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Panther Point (HDMI/DP 8ch)> at nid 5 on hdaa1 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] arc4random: no preloaded entropy cache [...] Trying to mount root from ufs:/dev/md0 []... [...] Root mount waiting for: usbus0 usbus1 usbus2 CAM [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Hitachi HTS545050A7E380 GG2OA6C0> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <SanDisk SSD i100 24GB 11.56.04> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 22902MB (46905264 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: pass1,ada1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] uhub0: 8 ports with 8 removable, self powered [...] uhub2: 3 ports with 3 removable, self powered [...] uhub1: 3 ports with 3 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 on uhub2 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub4 on uhub1 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] ugen0.2: <Kingston DataTraveler 2.0> at usbus0 [...] umass0 on uhub0 [...] umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.00, addr 1> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:3:0: Attached to scbus3 [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <Kingston DataTraveler 2.0 PMAP> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 3823MB (7829504 512 byte sectors) [...] da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [...] ugen0.3: <Logitech USB Optical Mouse> at usbus0 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 6 ports with 6 removable, self powered [...] ugen2.3: <vendor 0x8087 product 0x07da> at usbus2 [...] Root mount waiting for: usbus1 [...] ugen1.3: <Generic WebCam SC-13HDL12131N> at usbus1 [...] random: unblocking device. [...] Trying to mount root from zfs:livecd []... [...] Cuse v0.1.36 @ /dev/cuse [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] ums0 on uhub0 [...] ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/54.00, addr 2> on usbus0 [...] ums0: 8 buttons and [XYZT] coordinates ID=0 [...] ubt0 on uhub4 [...] ubt0: <vendor 0x8087 product 0x07da, class 224/1, rev 2.00/78.69, addr 3> on usbus2 [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] wlan0: Ethernet address: ... [...] wlan0: Ethernet address: ... [...] iwn0: iwn_read_firmware: ucode rev=0x12a80601 [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] Failed to add WC MTRR for [0xe0000000-0xefffffff]: -28; performance may suffer [...] [drm] Got stolen memory base 0xdba00000, size 0x4000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector LVDS-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.LVDS-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector VGA-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.VGA-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0 [...] VT: Replacing driver "vga" with new "fb". [...] start FB_INFO: [...] type=11 height=768 width=1366 depth=32 [...] cmsize=16 size=4227072 [...] pbase=0xe0061000 vbase=0xfffff800e0061000 [...] name=drmn0 flags=0x0 stride=5504 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: inteldrmfb frame buffer device [...] iwn0: iwn_read_firmware: ucode rev=0x12a80601 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_video0: <ACPI video extension> on vgapci0 [...] interface fusefs.1 already present in the KLD 'fuse.ko'! [...] linker_load_file: /boot/kernel/fusefs.ko - unsupported file type [...] ichwd0: <Intel Panther Point watchdog timer> on isa0 [...] pid 3545 (launch), jid 0, uid 1000: exited on signal 6 [...] pid 3540 (menubar), jid 0, uid 1000: exited on signal 6 [...] pid 3543 (launch), jid 0, uid 1000: exited on signal 6 [...] pid 3542 (filer-qt), jid 0, uid 1000: exited on signal 6 [...] pid 3544 (launch), jid 0, uid 1000: exited on signal 6 [...] pid 3547 (cyber-dock), jid 0, uid 1000: exited on signal 6 [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE r366954 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i5-2537M CPU @ 1.40GHz (1396.86-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1dbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 7971618816 (7602 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <SECCSD LH43STAR> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 2 3 [...] Timecounter "TSC" frequency 1396857112 Hz quality 1000 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] 000.000023 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <SECCSD LH43STAR> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xf0000000-0xf03fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf0600000-0xf060ffff irq 21 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf061a000-0xf061a3ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Panther Point HDA Controller> mem 0xf0610000-0xf0613fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] iwn0: <Intel Centrino Advanced 6235> mem 0xf0500000-0xf0501fff irq 16 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xf0404000-0xf0404fff,0xf0400000-0xf0403fff irq 19 at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x2c800000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf0619000-0xf06193ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Panther Point AHCI SATA controller> port 0x3088-0x308f,0x3094-0x3097,0x3080-0x3087,0x3090-0x3093,0x3060-0x307f mem 0xf0618000-0xf06187ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] psm0: model Elantech Touchpad, device ID 0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC269 (Analog)> at nid 20 and 24 on hdaa0 [...] pcm1: <Realtek ALC269 (Analog)> at nid 21 and 25 on hdaa0 [...] hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0 [...] hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Panther Point (HDMI/DP 8ch)> at nid 5 on hdaa1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 usbus1 usbus2 CAM [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Hitachi HTS545050A7E380 GG2OA6C0> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <SanDisk SSD i100 24GB 11.56.04> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 22902MB (46905264 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: pass1,ada1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] uhub0: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] ugen0.2: <Logitech USB Optical Mouse> at usbus0 [...] uhub2: 3 ports with 3 removable, self powered [...] uhub1: 3 ports with 3 removable, self powered [...] Root mount waiting for: usbus1 usbus2 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 on uhub2 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub4 on uhub1 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] uhub3: Root mount waiting for:6 ports with 6 removable, self powered [...] usbus1 usbus2 [...] uhub4: 6 ports with 6 removable, self powered [...] ugen2.3: <vendor 0x8087 product 0x07da> at usbus2 [...] ugen1.3: <Generic WebCam SC-13HDL12131N> at usbus1 [...] Cuse v0.1.36 @ /dev/cuse [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] iwn0: iwn_read_firmware: ucode rev=0x12a80601 [...] iwn0: iwn_read_firmware: ucode rev=0x12a80601 [...] ums0 on uhub0 [...] ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/54.00, addr 1> on usbus0 [...] ums0: 8 buttons and [XYZT] coordinates ID=0 [...] ubt0 on uhub4 [...] ubt0: <vendor 0x8087 product 0x07da, class 224/1, rev 2.00/78.69, addr 3> on usbus2 [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] Failed to add WC MTRR for [0xe0000000-0xefffffff]: -28; performance may suffer [...] [drm] Got stolen memory base 0xdba00000, size 0x4000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector LVDS-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.LVDS-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector VGA-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.VGA-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0 [...] VT: Replacing driver "vga" with new "fb". [...] start FB_INFO: [...] type=11 height=768 width=1366 depth=32 [...] cmsize=16 size=4227072 [...] pbase=0xe0061000 vbase=0xfffff800e0061000 [...] name=drmn0 flags=0x0 stride=5504 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: inteldrmfb frame buffer device [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_video0: <ACPI video extension> on vgapci0 [...] uhub_reattach_port: giving up port reset - device vanished [...] ugen0.3: <Realtek 802.11n NIC> at usbus0 [...] rtwn0 on uhub0 [...] rtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.00/0.00, addr 2> on usbus0 [...] rtwn0: MAC/BB RTL8188EU, RF 6052 1T1R [...] wlan1: Ethernet address: ... [...] rtwn0: rtwn_load_firmware: failed to upload firmware rtwn-rtl8188eufw (error 5) [...] wlan1: ieee80211_new_state_locked: pending INIT -> SCAN transition lost [...] wlan1: link state changed to UP [...] pid 2114 (python3.7), jid 0, uid 1001: exited on signal 6 [...] pid 1577 (filer-qt), jid 0, uid 1001: exited on signal 11 [...] rtwn0: at uhub0, port 1, addr 2 (disconnected) [...] rtwn0: device timeout [...] wlan1: link state changed to DOWN [...] rtwn0: r88eu_power_off: failed to block Tx queues [...] rtwn0: detached [...] rtwn0 on uhub0 [...] rtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.00/0.00, addr 2> on usbus0 [...] rtwn0: MAC/BB RTL8188EU, RF 6052 1T1R [...] ugen0.3: <Realtek 802.11n NIC> at usbus0 (disconnected) [...] rtwn0: at uhub0, port 1, addr 2 (disconnected) [...] rtwn0: detached [...] ugen0.3: <Realtek 802.11n NIC> at usbus0 [...] rtwn0 on uhub0 [...] rtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.00/0.00, addr 3> on usbus0 [...] rtwn0: MAC/BB RTL8188EU, RF 6052 1T1R [...] wlan1: Ethernet address: ... [...] wlan1: link state changed to UP [...] iwn0: iwn_intr: fatal firmware error [...] firmware error log: [...] error type = "UNKNOWN" (0x0000198A) [...] program counter = 0x00015920 [...] source line = 0x000001DC [...] error data = 0x0001B34B00000001 [...] branch link = 0x0001591000015910 [...] interrupt link = 0x0000DBEA00000000 [...] time = 3521116122 [...] driver status: [...] tx ring 0: qid=0 cur=0 queued=0 [...] tx ring 1: qid=1 cur=0 queued=0 [...] tx ring 2: qid=2 cur=0 queued=0 [...] tx ring 3: qid=3 cur=48 queued=0 [...] tx ring 4: qid=4 cur=0 queued=0 [...] tx ring 5: qid=5 cur=0 queued=0 [...] tx ring 6: qid=6 cur=0 queued=0 [...] tx ring 7: qid=7 cur=0 queued=0 [...] tx ring 8: qid=8 cur=0 queued=0 [...] tx ring 9: qid=9 cur=140 queued=0 [...] tx ring 10: qid=10 cur=0 queued=0 [...] tx ring 11: qid=11 cur=0 queued=0 [...] tx ring 12: qid=12 cur=0 queued=0 [...] tx ring 13: qid=13 cur=0 queued=0 [...] tx ring 14: qid=14 cur=0 queued=0 [...] tx ring 15: qid=15 cur=0 queued=0 [...] tx ring 16: qid=16 cur=0 queued=0 [...] tx ring 17: qid=17 cur=0 queued=0 [...] tx ring 18: qid=18 cur=0 queued=0 [...] tx ring 19: qid=19 cur=0 queued=0 [...] rx ring: cur=16 [...] iwn0: iwn_panicked: controller panicked, iv_state = 1; restarting [...] iwn0: iwn_read_firmware: ucode rev=0x12a80601