[...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p19-HBSD #0 f692db99f3c(stable/21.7)-dirty: Mon Aug 2 13:29:29 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Atom(TM) CPU D525 @ 1.80GHz (1800.04-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x106ca Family=0x6 Model=0x1c Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 4086013952 (3896 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <082114 APIC1347> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0: Changing APIC ID to 4 [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 3 2 1 [...] Timecounter "TSC" frequency 1800039888 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812907f0, 0) error 19 [...] 000.000054 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <082114 RSDT1347> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x7800-0x7807 mem 0xfe500000-0xfe57ffff,0xd0000000-0xdfffffff,0xfe400000-0xfe4fffff irq 16 at device 2.0 on pci0 [...] agp0: <Intel Pineview SVGA controller> on vgapci0 [...] agp0: aperture size is 256M, detected 8188k stolen memory [...] vgapci0: Boot video device [...] vgapci1: <VGA-compatible display> mem 0xfe380000-0xfe3fffff at device 2.1 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 22 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] em0: <Intel(R) Gigabit CT 82574L> port 0x9c00-0x9c1f mem 0xfe6e0000-0xfe6fffff,0xfe6dc000-0xfe6dffff irq 16 at device 0.0 on pci1 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 23 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] em1: <Intel(R) 82583V> port 0xac00-0xac1f mem 0xfe7e0000-0xfe7fffff,0xfe7dc000-0xfe7dffff irq 17 at device 0.0 on pci2 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 20 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] em2: <Intel(R) 82583V> port 0xbc00-0xbc1f mem 0xfe8e0000-0xfe8fffff,0xfe8dc000-0xfe8dffff irq 18 at device 0.0 on pci3 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using an MSI interrupt [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 21 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] em3: <Intel(R) 82583V> port 0xcc00-0xcc1f mem 0xfe9e0000-0xfe9fffff,0xfe9dc000-0xfe9dffff irq 19 at device 0.0 on pci4 [...] em3: Using 1024 TX descriptors and 1024 RX descriptors [...] em3: Using an MSI interrupt [...] em3: Ethernet address: ... [...] em3: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 22 at device 28.4 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] em4: <Intel(R) 82583V> port 0xdc00-0xdc1f mem 0xfeae0000-0xfeafffff,0xfeadc000-0xfeadffff irq 16 at device 0.0 on pci5 [...] em4: Using 1024 TX descriptors and 1024 RX descriptors [...] em4: Using an MSI interrupt [...] em4: Ethernet address: ... [...] em4: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 23 at device 28.5 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] em5: <Intel(R) 82583V> port 0xec00-0xec1f mem 0xfebe0000-0xfebfffff,0xfebdc000-0xfebdffff irq 17 at device 0.0 on pci6 [...] em5: Using 1024 TX descriptors and 1024 RX descriptors [...] em5: Using an MSI interrupt [...] em5: Ethernet address: ... [...] em5: netmap queues/slots: TX 1/1024, RX 1/1024 [...] uhci0: <Intel 82801H (ICH8) USB controller USB-A> port 0x8000-0x801f irq 23 at device 29.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801H (ICH8) USB controller USB-B> port 0x7c00-0x7c1f irq 19 at device 29.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801H (ICH8) USB controller USB-C> port 0x7880-0x789f irq 18 at device 29.2 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfe5ff000-0xfe5ff3ff irq 23 at device 29.7 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ahci0: <Intel ICH8M AHCI SATA controller> port 0x8400-0x8407,0x8c00-0x8c03,0x8880-0x8887,0x8800-0x8803,0x8480-0x849f mem 0xfe5ff800-0xfe5fffff irq 18 at device 31.2 on pci0 [...] ahci0: AHCI v1.10 with 3 3Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] orm0: <ISA Option ROMs> at iomem 0xce000-0xcefff,0xcf000-0xcffff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] Timecounters tick every 1.000 msec [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] uhub1: 6 ports with 6 removable, self powered [...] ugen3.2: <Generic Mass Storage> at usbus3 [...] umass0 on uhub1 [...] umass0: <Generic Mass Storage, class 0/0, rev 2.00/1.04, addr 2> on usbus3 [...] umass0: SCSI over Bulk-Only; quirks = 0x4101 [...] umass0:4:0: Attached to scbus4 [...] ada0 at ahcich2 bus 0 scbus3 target 0 lun 0 [...] ada0: <TS32GSSD370 N0815B> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 1024bytes) [...] ada0: Command Queueing enabled [...] ada0: 30533MB (62533296 512 byte sectors) [...] GEOM: ada0: the primary GPT table is corrupt or invalid. [...] GEOM: ada0: using the secondary instead -- recovery strongly advised. [...] da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 [...] da0: <Generic Flash Disk 8.07> Removable Direct Access SCSI-2 device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 4038MB (8269824 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] Trying to mount root from ufs:/dev/ufs/OPNsense_Install [ro,noatime]... [...] GEOM: diskid/XXXXXXXXXXXXXXXX the primary GPT table is corrupt or invalid. [...] GEOM: diskid/XXXXXXXXXXXXXXXX using the secondary instead -- recovery strongly advised. [...] em3: link state changed to UP [...] em5: link state changed to UP [...] em3: link state changed to DOWN [...] em5: link state changed to DOWN [...] em3: link state changed to UP [...] em5: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: No AES or SHA support. [...] em3: link state changed to DOWN [...] em5: link state changed to DOWN [...] em3: link state changed to UP [...] em5: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present; [...] to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] GEOM: diskid/XXXXXXXXXXXXXXXX the primary GPT table is corrupt or invalid. [...] GEOM: diskid/XXXXXXXXXXXXXXXX using the secondary instead -- recovery strongly advised. [...] Warning: memory type solaris leaked memory on destroy (4 allocations, 576 bytes leaked). [...] ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present; [...] to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Warning: memory type solaris leaked memory on destroy (4 allocations, 576 bytes leaked). [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] All buffers synced. [...] Uptime: 25m56s [...] umass0: detached [...] Rebooting... [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p19-HBSD #0 f692db99f3c(stable/21.7)-dirty: Mon Aug 2 13:29:29 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Atom(TM) CPU D525 @ 1.80GHz (1800.04-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x106ca Family=0x6 Model=0x1c Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 4086013952 (3896 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <082114 APIC1347> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0: Changing APIC ID to 4 [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 2 3 1 [...] Timecounter "TSC" frequency 1800035307 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812907f0, 0) error 19 [...] 000.000054 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <082114 RSDT1347> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x7800-0x7807 mem 0xfe500000-0xfe57ffff,0xd0000000-0xdfffffff,0xfe400000-0xfe4fffff irq 16 at device 2.0 on pci0 [...] agp0: <Intel Pineview SVGA controller> on vgapci0 [...] agp0: aperture size is 256M, detected 8188k stolen memory [...] vgapci0: Boot video device [...] vgapci1: <VGA-compatible display> mem 0xfe380000-0xfe3fffff at device 2.1 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 22 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] em0: <Intel(R) Gigabit CT 82574L> port 0x9c00-0x9c1f mem 0xfe6e0000-0xfe6fffff,0xfe6dc000-0xfe6dffff irq 16 at device 0.0 on pci1 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 23 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] em1: <Intel(R) 82583V> port 0xac00-0xac1f mem 0xfe7e0000-0xfe7fffff,0xfe7dc000-0xfe7dffff irq 17 at device 0.0 on pci2 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 20 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] em2: <Intel(R) 82583V> port 0xbc00-0xbc1f mem 0xfe8e0000-0xfe8fffff,0xfe8dc000-0xfe8dffff irq 18 at device 0.0 on pci3 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using an MSI interrupt [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 21 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] em3: <Intel(R) 82583V> port 0xcc00-0xcc1f mem 0xfe9e0000-0xfe9fffff,0xfe9dc000-0xfe9dffff irq 19 at device 0.0 on pci4 [...] em3: Using 1024 TX descriptors and 1024 RX descriptors [...] em3: Using an MSI interrupt [...] em3: Ethernet address: ... [...] em3: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 22 at device 28.4 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] em4: <Intel(R) 82583V> port 0xdc00-0xdc1f mem 0xfeae0000-0xfeafffff,0xfeadc000-0xfeadffff irq 16 at device 0.0 on pci5 [...] em4: Using 1024 TX descriptors and 1024 RX descriptors [...] em4: Using an MSI interrupt [...] em4: Ethernet address: ... [...] em4: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 23 at device 28.5 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] em5: <Intel(R) 82583V> port 0xec00-0xec1f mem 0xfebe0000-0xfebfffff,0xfebdc000-0xfebdffff irq 17 at device 0.0 on pci6 [...] em5: Using 1024 TX descriptors and 1024 RX descriptors [...] em5: Using an MSI interrupt [...] em5: Ethernet address: ... [...] em5: netmap queues/slots: TX 1/1024, RX 1/1024 [...] uhci0: <Intel 82801H (ICH8) USB controller USB-A> port 0x8000-0x801f irq 23 at device 29.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801H (ICH8) USB controller USB-B> port 0x7c00-0x7c1f irq 19 at device 29.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801H (ICH8) USB controller USB-C> port 0x7880-0x789f irq 18 at device 29.2 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfe5ff000-0xfe5ff3ff irq 23 at device 29.7 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ahci0: <Intel ICH8M AHCI SATA controller> port 0x8400-0x8407,0x8c00-0x8c03,0x8880-0x8887,0x8800-0x8803,0x8480-0x849f mem 0xfe5ff800-0xfe5fffff irq 18 at device 31.2 on pci0 [...] ahci0: AHCI v1.10 with 3 3Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] orm0: <ISA Option ROMs> at iomem 0xce000-0xcefff,0xcf000-0xcffff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 6 ports with 6 removable, self powered [...] ugen3.2: <Generic Mass Storage> at usbus3 [...] umass0 on uhub1 [...] umass0: <Generic Mass Storage, class 0/0, rev 2.00/1.04, addr 2> on usbus3 [...] umass0: SCSI over Bulk-Only; quirks = 0x4101 [...] umass0:4:0: Attached to scbus4 [...] ada0 at ahcich2 bus 0 scbus3 target 0 lun 0 [...] ada0: <TS32GSSD370 N0815B> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 1024bytes) [...] ada0: Command Queueing enabled [...] ada0: 30533MB (62533296 512 byte sectors) [...] Trying to mount root from ufs:/dev/ufs/OPNsense_Install [ro,noatime]... [...] da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 [...] da0: <Generic Flash Disk 8.07> Removable Direct Access SCSI-2 device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 4038MB (8269824 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] em3: link state changed to UP [...] em5: link state changed to UP [...] em3: link state changed to DOWN [...] em5: link state changed to DOWN [...] em3: link state changed to UP [...] em5: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: No AES or SHA support. [...] em3: link state changed to DOWN [...] em5: link state changed to DOWN [...] em3: link state changed to UP [...] em5: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present; [...] to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Warning: memory type solaris leaked memory on destroy (4 allocations, 576 bytes leaked). [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] All buffers synced. [...] Uptime: 10m59s [...] umass0: detached [...] Rebooting... [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p19-HBSD #0 f692db99f3c(stable/21.7)-dirty: Mon Aug 2 13:29:29 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Atom(TM) CPU D525 @ 1.80GHz (1800.04-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x106ca Family=0x6 Model=0x1c Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 4086013952 (3896 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <082114 APIC1347> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0: Changing APIC ID to 4 [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 3 1 2 [...] Timecounter "TSC" frequency 1800039879 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812907f0, 0) error 19 [...] 000.000054 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <082114 RSDT1347> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x7800-0x7807 mem 0xfe500000-0xfe57ffff,0xd0000000-0xdfffffff,0xfe400000-0xfe4fffff irq 16 at device 2.0 on pci0 [...] agp0: <Intel Pineview SVGA controller> on vgapci0 [...] agp0: aperture size is 256M, detected 8188k stolen memory [...] vgapci0: Boot video device [...] vgapci1: <VGA-compatible display> mem 0xfe380000-0xfe3fffff at device 2.1 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 22 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] em0: <Intel(R) Gigabit CT 82574L> port 0x9c00-0x9c1f mem 0xfe6e0000-0xfe6fffff,0xfe6dc000-0xfe6dffff irq 16 at device 0.0 on pci1 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 23 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] em1: <Intel(R) 82583V> port 0xac00-0xac1f mem 0xfe7e0000-0xfe7fffff,0xfe7dc000-0xfe7dffff irq 17 at device 0.0 on pci2 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 20 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] em2: <Intel(R) 82583V> port 0xbc00-0xbc1f mem 0xfe8e0000-0xfe8fffff,0xfe8dc000-0xfe8dffff irq 18 at device 0.0 on pci3 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using an MSI interrupt [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 21 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] em3: <Intel(R) 82583V> port 0xcc00-0xcc1f mem 0xfe9e0000-0xfe9fffff,0xfe9dc000-0xfe9dffff irq 19 at device 0.0 on pci4 [...] em3: Using 1024 TX descriptors and 1024 RX descriptors [...] em3: Using an MSI interrupt [...] em3: Ethernet address: ... [...] em3: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 22 at device 28.4 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] em4: <Intel(R) 82583V> port 0xdc00-0xdc1f mem 0xfeae0000-0xfeafffff,0xfeadc000-0xfeadffff irq 16 at device 0.0 on pci5 [...] em4: Using 1024 TX descriptors and 1024 RX descriptors [...] em4: Using an MSI interrupt [...] em4: Ethernet address: ... [...] em4: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 23 at device 28.5 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] em5: <Intel(R) 82583V> port 0xec00-0xec1f mem 0xfebe0000-0xfebfffff,0xfebdc000-0xfebdffff irq 17 at device 0.0 on pci6 [...] em5: Using 1024 TX descriptors and 1024 RX descriptors [...] em5: Using an MSI interrupt [...] em5: Ethernet address: ... [...] em5: netmap queues/slots: TX 1/1024, RX 1/1024 [...] uhci0: <Intel 82801H (ICH8) USB controller USB-A> port 0x8000-0x801f irq 23 at device 29.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801H (ICH8) USB controller USB-B> port 0x7c00-0x7c1f irq 19 at device 29.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801H (ICH8) USB controller USB-C> port 0x7880-0x789f irq 18 at device 29.2 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfe5ff000-0xfe5ff3ff irq 23 at device 29.7 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ahci0: <Intel ICH8M AHCI SATA controller> port 0x8400-0x8407,0x8c00-0x8c03,0x8880-0x8887,0x8800-0x8803,0x8480-0x849f mem 0xfe5ff800-0xfe5fffff irq 18 at device 31.2 on pci0 [...] ahci0: AHCI v1.10 with 3 3Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] orm0: <ISA Option ROMs> at iomem 0xce000-0xcefff,0xcf000-0xcffff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] Timecounters tick every 1.000 msec [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] ada0 at ahcich2 bus 0 scbus3 target 0 lun 0 [...] ada0: <TS32GSSD370 N0815B> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 1024bytes) [...] ada0: Command Queueing enabled [...] ada0: 30533MB (62533296 512 byte sectors) [...] Trying to mount root from ufs:/dev/ada0p2 [rw]... [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] uhub2: 6 ports with 6 removable, self powered [...] em3: link state changed to UP [...] em5: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: No AES or SHA support. [...] em3: link state changed to DOWN [...] em5: link state changed to DOWN [...] em3: link state changed to UP [...] em5: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 4 4 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] All buffers synced. [...] Uptime: 16m46s [...] Rebooting... [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p20-HBSD #0 e4fc5be9c3d(stable/21.7)-dirty: Thu Sep 2 10:30:36 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Atom(TM) CPU D525 @ 1.80GHz (1800.04-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x106ca Family=0x6 Model=0x1c Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 4086013952 (3896 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <082114 APIC1347> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0: Changing APIC ID to 4 [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 3 1 2 [...] Timecounter "TSC" frequency 1800035514 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812907f0, 0) error 19 [...] 000.000054 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <082114 RSDT1347> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x7800-0x7807 mem 0xfe500000-0xfe57ffff,0xd0000000-0xdfffffff,0xfe400000-0xfe4fffff irq 16 at device 2.0 on pci0 [...] agp0: <Intel Pineview SVGA controller> on vgapci0 [...] agp0: aperture size is 256M, detected 8188k stolen memory [...] vgapci0: Boot video device [...] vgapci1: <VGA-compatible display> mem 0xfe380000-0xfe3fffff at device 2.1 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 22 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] em0: <Intel(R) Gigabit CT 82574L> port 0x9c00-0x9c1f mem 0xfe6e0000-0xfe6fffff,0xfe6dc000-0xfe6dffff irq 16 at device 0.0 on pci1 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 23 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] em1: <Intel(R) 82583V> port 0xac00-0xac1f mem 0xfe7e0000-0xfe7fffff,0xfe7dc000-0xfe7dffff irq 17 at device 0.0 on pci2 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 20 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] em2: <Intel(R) 82583V> port 0xbc00-0xbc1f mem 0xfe8e0000-0xfe8fffff,0xfe8dc000-0xfe8dffff irq 18 at device 0.0 on pci3 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using an MSI interrupt [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 21 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] em3: <Intel(R) 82583V> port 0xcc00-0xcc1f mem 0xfe9e0000-0xfe9fffff,0xfe9dc000-0xfe9dffff irq 19 at device 0.0 on pci4 [...] em3: Using 1024 TX descriptors and 1024 RX descriptors [...] em3: Using an MSI interrupt [...] em3: Ethernet address: ... [...] em3: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 22 at device 28.4 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] em4: <Intel(R) 82583V> port 0xdc00-0xdc1f mem 0xfeae0000-0xfeafffff,0xfeadc000-0xfeadffff irq 16 at device 0.0 on pci5 [...] em4: Using 1024 TX descriptors and 1024 RX descriptors [...] em4: Using an MSI interrupt [...] em4: Ethernet address: ... [...] em4: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 23 at device 28.5 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] em5: <Intel(R) 82583V> port 0xec00-0xec1f mem 0xfebe0000-0xfebfffff,0xfebdc000-0xfebdffff irq 17 at device 0.0 on pci6 [...] em5: Using 1024 TX descriptors and 1024 RX descriptors [...] em5: Using an MSI interrupt [...] em5: Ethernet address: ... [...] em5: netmap queues/slots: TX 1/1024, RX 1/1024 [...] uhci0: <Intel 82801H (ICH8) USB controller USB-A> port 0x8000-0x801f irq 23 at device 29.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801H (ICH8) USB controller USB-B> port 0x7c00-0x7c1f irq 19 at device 29.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801H (ICH8) USB controller USB-C> port 0x7880-0x789f irq 18 at device 29.2 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfe5ff000-0xfe5ff3ff irq 23 at device 29.7 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ahci0: <Intel ICH8M AHCI SATA controller> port 0x8400-0x8407,0x8c00-0x8c03,0x8880-0x8887,0x8800-0x8803,0x8480-0x849f mem 0xfe5ff800-0xfe5fffff irq 18 at device 31.2 on pci0 [...] ahci0: AHCI v1.10 with 3 3Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] orm0: <ISA Option ROMs> at iomem 0xce000-0xcefff,0xcf000-0xcffff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] Timecounters tick every 1.000 msec [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] ada0 at ahcich2 bus 0 scbus3 target 0 lun 0 [...] ada0: <TS32GSSD370 N0815B> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 1024bytes) [...] ada0: Command Queueing enabled [...] ada0: 30533MB (62533296 512 byte sectors) [...] Trying to mount root from ufs:/dev/ada0p2 [rw]... [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub3: 6 ports with 6 removable, self powered [...] em3: link state changed to UP [...] em5: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: No AES or SHA support. [...] em5: link state changed to DOWN [...] em3: link state changed to DOWN [...] pflog0: permanently promiscuous mode enabled [...] em3: link state changed to UP [...] em5: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] em5: promiscuous mode enabled [...] WARNING: attempt to domain_add(netgraph) after domainfinalize()