[...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p20-HBSD #0 e4fc5be9c3d(stable/21.7)-dirty: Thu Sep 2 10:30:36 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i5-10400 CPU @ 2.90GHz (2904.12-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xa0655 Family=0x6 Model=0xa5 Stepping=5 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000008<PKU,SGXLC> [...] Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x2b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33153384448 (31617 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 7 5 3 9 11 6 4 2 8 10 [...] Timecounter "TSC-low" frequency 1452060260 Hz quality 1000 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812907f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000062 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 350 [...] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] ix0: <Intel(R) X550-T1> mem 0x50800000-0x50bfffff,0x50c00000-0x50c03fff at device 0.0 on pci1 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 6 RX queues 6 TX queues [...] ix0: Using MSI-X interrupts with 7 vectors [...] ix0: allocated for 6 queues [...] ix0: allocated for 6 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: netmap queues/slots: TX 6/2048, RX 6/2048 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x51000000-0x51ffffff,0x40000000-0x4fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x52420000-0x5242ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0x52434000-0x52435fff,0x5243a000-0x5243a0ff,0x52439000-0x524397ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 27.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] nvme0: <Generic NVMe Device> mem 0x52200000-0x52203fff at device 0.0 on pci3 [...] pcib4: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] ix1: <Intel(R) X550-T1> mem 0x50000000-0x503fffff,0x50400000-0x50403fff at device 0.0 on pci4 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 6 RX queues 6 TX queues [...] ix1: Using MSI-X interrupts with 7 vectors [...] ix1: allocated for 6 queues [...] ix1: allocated for 6 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: netmap queues/slots: TX 6/2048, RX 6/2048 [...] pcib5: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 29.4 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel (0x06c8) HDA Controller> mem 0x52430000-0x52433fff,0x52000000-0x520fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] em0: <Intel(R) I219-V CMP(11)> mem 0x52400000-0x5241ffff at device 31.6 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] acpi_tz2: <Thermal Zone> on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <WD_BLACK SN850 1TB> NVMe namespace [...] nvd0: 953869MB (1953525168 512 byte sectors) [...] hdacc0: <Realtek ALC887 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] uhub0: 24 ports with 24 removable, self powered [...] ugen0.2: <vendor 0x1997 mini keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <vendor 0x1997 mini keyboard, class 0/0, rev 1.10/1.02, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus0 [...] ugen0.3: <TSTP MTouch> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.4: <ITE Tech. Inc. ITE Device> at usbus0 [...] ums0 on uhub0 [...] ums0: <vendor 0x1997 mini keyboard, class 0/0, rev 1.10/1.02, addr 1> on usbus0 [...] ums0: 5 buttons and [XYZ] coordinates ID=1 [...] ums1 on uhub0 [...] ums1: <TSTP MTouch, class 0/0, rev 2.00/0.00, addr 2> on usbus0 [...] ums1: error reading report description [...] device_attach: ums1 attach returned 12 [...] ums1 on uhub0 [...] ums1: <TSTP MTouch, class 0/0, rev 2.00/0.00, addr 2> on usbus0 [...] ums1: error reading report description [...] device_attach: ums1 attach returned 12 [...] uhid0 on uhub0 [...] uhid0: <ITE Tech. Inc. ITE Device, class 0/0, rev 2.00/0.01, addr 3> on usbus0 [...] ums1 on uhub0 [...] ums1: <TSTP MTouch, class 0/0, rev 2.00/0.00, addr 2> on usbus0 [...] ums1: error reading report description [...] device_attach: ums1 attach returned 12 [...] ums1 on uhub0 [...] ums1: <TSTP MTouch, class 0/0, rev 2.00/0.00, addr 2> on usbus0 [...] ums1: error reading report description [...] device_attach: ums1 attach returned 12 [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] ix0: link state changed to DOWN [...] ix1: link state changed to DOWN [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] 268.292017 [ 853] iflib_netmap_config txr 6 rxr 6 txd 2048 rxd 2048 rbufsz 2048 [...] ix0: permanently promiscuous mode enabled [...] 268.593678 [ 853] iflib_netmap_config txr 6 rxr 6 txd 2048 rxd 2048 rbufsz 2048 [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] 182.104800 [ 853] iflib_netmap_config txr 6 rxr 6 txd 2048 rxd 2048 rbufsz 2048 [...] 182.105004 [ 853] iflib_netmap_config txr 6 rxr 6 txd 2048 rxd 2048 rbufsz 2048 [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] 202.433303 [ 853] iflib_netmap_config txr 6 rxr 6 txd 2048 rxd 2048 rbufsz 2048 [...] 202.433512 [ 853] iflib_netmap_config txr 6 rxr 6 txd 2048 rxd 2048 rbufsz 2048 [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] 639.661517 [ 853] iflib_netmap_config txr 6 rxr 6 txd 2048 rxd 2048 rbufsz 2048 [...] ix1: permanently promiscuous mode enabled [...] 639.663005 [ 853] iflib_netmap_config txr 6 rxr 6 txd 2048 rxd 2048 rbufsz 2048 [...] ix1: link state changed to DOWN [...] ix1: link state changed to UP [...] ix1: link state changed to DOWN [...] 640.286852 [ 853] iflib_netmap_config txr 6 rxr 6 txd 2048 rxd 2048 rbufsz 2048 [...] ix1: link state changed to UP [...] ix1: link state changed to DOWN [...] ix1: link state changed to UP [...] ix1: link state changed to DOWN [...] ix1: link state changed to UP [...] 006.916376 [ 853] iflib_netmap_config txr 6 rxr 6 txd 2048 rxd 2048 rbufsz 2048 [...] 006.917923 [ 853] iflib_netmap_config txr 6 rxr 6 txd 2048 rxd 2048 rbufsz 2048 [...] ix1: link state changed to DOWN [...] ix1: link state changed to UP [...] ix1: link state changed to DOWN [...] 007.544619 [ 853] iflib_netmap_config txr 6 rxr 6 txd 2048 rxd 2048 rbufsz 2048 [...] ix1: link state changed to UP [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] pid 62953 (eastpect), jid 0, uid 0: exited on signal 11 (core dumped) [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] 531.514743 [ 853] iflib_netmap_config txr 6 rxr 6 txd 2048 rxd 2048 rbufsz 2048 [...] 531.514944 [ 853] iflib_netmap_config txr 6 rxr 6 txd 2048 rxd 2048 rbufsz 2048 [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] [HBSD SEGVGUARD] [/usr/local/sensei//bin//eastpect (62639)] Suspension expired. [...] -> pid: 62639 ppid: 42153 p_pax: 0xa50<SEGVGUARD,ASLR,NOSHLIBRANDOM,NODISALLOWMAP32BIT> [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] ix1: link state changed to DOWN [...] ix1: link state changed to UP [...] ix1: link state changed to DOWN [...] ix1: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 1 1 1 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] Uptime: 3h24m25s [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p20-HBSD #0 e4fc5be9c3d(stable/21.7)-dirty: Thu Sep 2 10:30:36 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i5-10400 CPU @ 2.90GHz (2904.17-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xa0655 Family=0x6 Model=0xa5 Stepping=5 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000008<PKU,SGXLC> [...] Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x2b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33153384448 (31617 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 7 3 5 9 11 2 4 6 8 10 [...] Timecounter "TSC-low" frequency 1452085226 Hz quality 1000 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812907f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000062 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 350 [...] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] ix0: <Intel(R) X550-T1> mem 0x50800000-0x50bfffff,0x50c00000-0x50c03fff at device 0.0 on pci1 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 6 RX queues 6 TX queues [...] ix0: Using MSI-X interrupts with 7 vectors [...] ix0: allocated for 6 queues [...] ix0: allocated for 6 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: netmap queues/slots: TX 6/2048, RX 6/2048 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x51000000-0x51ffffff,0x40000000-0x4fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x52420000-0x5242ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0x52434000-0x52435fff,0x5243a000-0x5243a0ff,0x52439000-0x524397ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 27.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] nvme0: <Generic NVMe Device> mem 0x52200000-0x52203fff at device 0.0 on pci3 [...] pcib4: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] ix1: <Intel(R) X550-T1> mem 0x50000000-0x503fffff,0x50400000-0x50403fff at device 0.0 on pci4 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 6 RX queues 6 TX queues [...] ix1: Using MSI-X interrupts with 7 vectors [...] ix1: allocated for 6 queues [...] ix1: allocated for 6 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: netmap queues/slots: TX 6/2048, RX 6/2048 [...] pcib5: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 29.4 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel (0x06c8) HDA Controller> mem 0x52430000-0x52433fff,0x52000000-0x520fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] em0: <Intel(R) I219-V CMP(11)> mem 0x52400000-0x5241ffff at device 31.6 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] acpi_tz2: <Thermal Zone> on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <WD_BLACK SN850 1TB> NVMe namespace [...] nvd0: 953869MB (1953525168 512 byte sectors) [...] hdacc0: <Realtek ALC887 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] uhub0: 24 ports with 24 removable, self powered [...] ugen0.2: <vendor 0x1997 mini keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <vendor 0x1997 mini keyboard, class 0/0, rev 1.10/1.02, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus0 [...] ugen0.3: <TSTP MTouch> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.4: <ITE Tech. Inc. ITE Device> at usbus0 [...] ums0 on uhub0 [...] ums0: <vendor 0x1997 mini keyboard, class 0/0, rev 1.10/1.02, addr 1> on usbus0 [...] ums0: 5 buttons and [XYZ] coordinates ID=1 [...] ums1 on uhub0 [...] ums1: <TSTP MTouch, class 0/0, rev 2.00/0.00, addr 2> on usbus0 [...] ums1: error reading report description [...] device_attach: ums1 attach returned 12 [...] ums1 on uhub0 [...] ums1: <TSTP MTouch, class 0/0, rev 2.00/0.00, addr 2> on usbus0 [...] ums1: error reading report description [...] device_attach: ums1 attach returned 12 [...] uhid0 on uhub0 [...] uhid0: <ITE Tech. Inc. ITE Device, class 0/0, rev 2.00/0.01, addr 3> on usbus0 [...] ums1 on uhub0 [...] ums1: <TSTP MTouch, class 0/0, rev 2.00/0.00, addr 2> on usbus0 [...] ums1: error reading report description [...] device_attach: ums1 attach returned 12 [...] ums1 on uhub0 [...] ums1: <TSTP MTouch, class 0/0, rev 2.00/0.00, addr 2> on usbus0 [...] ums1: error reading report description [...] device_attach: ums1 attach returned 12 [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] ix0: link state changed to DOWN [...] ix1: link state changed to DOWN [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] 560.169906 [ 853] iflib_netmap_config txr 6 rxr 6 txd 2048 rxd 2048 rbufsz 2048 [...] ix0: permanently promiscuous mode enabled [...] 560.222960 [ 853] iflib_netmap_config txr 6 rxr 6 txd 2048 rxd 2048 rbufsz 2048 [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] 646.547445 [ 853] iflib_netmap_config txr 6 rxr 6 txd 2048 rxd 2048 rbufsz 2048 [...] ix1: permanently promiscuous mode enabled [...] 646.549018 [ 853] iflib_netmap_config txr 6 rxr 6 txd 2048 rxd 2048 rbufsz 2048 [...] ix1: link state changed to DOWN [...] ix1: link state changed to UP [...] ix1: link state changed to DOWN [...] 647.175699 [ 853] iflib_netmap_config txr 6 rxr 6 txd 2048 rxd 2048 rbufsz 2048 [...] ix1: link state changed to UP [...] ix1: link state changed to DOWN [...] ix1: link state changed to UP [...] ix1: link state changed to DOWN [...] ix1: link state changed to UP [...] pid 13024 (eastpect), jid 0, uid 0: exited on signal 11 (core dumped) [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] 375.782349 [ 853] iflib_netmap_config txr 6 rxr 6 txd 2048 rxd 2048 rbufsz 2048 [...] 375.782561 [ 853] iflib_netmap_config txr 6 rxr 6 txd 2048 rxd 2048 rbufsz 2048 [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 2 2 2 2 1 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] Uptime: 17m13s [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p20-HBSD #0 e4fc5be9c3d(stable/21.7)-dirty: Thu Sep 2 10:30:36 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i5-10400 CPU @ 2.90GHz (2904.13-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xa0655 Family=0x6 Model=0xa5 Stepping=5 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000008<PKU,SGXLC> [...] Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x2b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33153384448 (31617 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 7 5 3 9 11 2 6 4 8 10 [...] Timecounter "TSC-low" frequency 1452063550 Hz quality 1000 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812907f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000062 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 350 [...] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] ix0: <Intel(R) X550-T1> mem 0x50800000-0x50bfffff,0x50c00000-0x50c03fff at device 0.0 on pci1 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 6 RX queues 6 TX queues [...] ix0: Using MSI-X interrupts with 7 vectors [...] ix0: allocated for 6 queues [...] ix0: allocated for 6 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: netmap queues/slots: TX 6/2048, RX 6/2048 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x51000000-0x51ffffff,0x40000000-0x4fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x52420000-0x5242ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0x52434000-0x52435fff,0x5243a000-0x5243a0ff,0x52439000-0x524397ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 27.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] nvme0: <Generic NVMe Device> mem 0x52200000-0x52203fff at device 0.0 on pci3 [...] pcib4: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] ix1: <Intel(R) X550-T1> mem 0x50000000-0x503fffff,0x50400000-0x50403fff at device 0.0 on pci4 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 6 RX queues 6 TX queues [...] ix1: Using MSI-X interrupts with 7 vectors [...] ix1: allocated for 6 queues [...] ix1: allocated for 6 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: netmap queues/slots: TX 6/2048, RX 6/2048 [...] pcib5: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 29.4 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel (0x06c8) HDA Controller> mem 0x52430000-0x52433fff,0x52000000-0x520fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] em0: <Intel(R) I219-V CMP(11)> mem 0x52400000-0x5241ffff at device 31.6 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] acpi_tz2: <Thermal Zone> on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <WD_BLACK SN850 1TB> NVMe namespace [...] nvd0: 953869MB (1953525168 512 byte sectors) [...] hdacc0: <Realtek ALC887 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] uhub0: 24 ports with 24 removable, self powered [...] ugen0.2: <vendor 0x1997 mini keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <vendor 0x1997 mini keyboard, class 0/0, rev 1.10/1.02, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus0 [...] ugen0.3: <TSTP MTouch> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.4: <ITE Tech. Inc. ITE Device> at usbus0 [...] ums0 on uhub0 [...] ums0: <vendor 0x1997 mini keyboard, class 0/0, rev 1.10/1.02, addr 1> on usbus0 [...] ums0: 5 buttons and [XYZ] coordinates ID=1 [...] ums1 on uhub0 [...] ums1: <TSTP MTouch, class 0/0, rev 2.00/0.00, addr 2> on usbus0 [...] ums1: error reading report description [...] device_attach: ums1 attach returned 12 [...] ums1 on uhub0 [...] ums1: <TSTP MTouch, class 0/0, rev 2.00/0.00, addr 2> on usbus0 [...] ums1: error reading report description [...] device_attach: ums1 attach returned 12 [...] uhid0 on uhub0 [...] uhid0: <ITE Tech. Inc. ITE Device, class 0/0, rev 2.00/0.01, addr 3> on usbus0 [...] ums1 on uhub0 [...] ums1: <TSTP MTouch, class 0/0, rev 2.00/0.00, addr 2> on usbus0 [...] ums1: error reading report description [...] device_attach: ums1 attach returned 12 [...] ums1 on uhub0 [...] ums1: <TSTP MTouch, class 0/0, rev 2.00/0.00, addr 2> on usbus0 [...] ums1: error reading report description [...] device_attach: ums1 attach returned 12 [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] ix0: link state changed to DOWN [...] ix1: link state changed to DOWN [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] 614.368817 [ 853] iflib_netmap_config txr 6 rxr 6 txd 2048 rxd 2048 rbufsz 2048 [...] ix0: permanently promiscuous mode enabled [...] 614.420138 [ 853] iflib_netmap_config txr 6 rxr 6 txd 2048 rxd 2048 rbufsz 2048 [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] pid 69718 (eastpect), jid 0, uid 0: exited on signal 11 (core dumped) [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] 696.017565 [ 853] iflib_netmap_config txr 6 rxr 6 txd 2048 rxd 2048 rbufsz 2048 [...] 696.017778 [ 853] iflib_netmap_config txr 6 rxr 6 txd 2048 rxd 2048 rbufsz 2048 [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] [HBSD SEGVGUARD] [/usr/local/sensei/bin/eastpect (81933)] Suspension expired. [...] -> pid: 81933 ppid: 23392 p_pax: 0xa50<SEGVGUARD,ASLR,NOSHLIBRANDOM,NODISALLOWMAP32BIT>