[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248059-267a40127d5 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Atom(TM) CPU C2750 @ 2.41GHz (2416.85-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x406d8 Family=0x6 Model=0x4d Stepping=8 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33316921344 (31773 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL TIANO > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20201113/tbfadt-850) [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 3 6 1 2 4 7 5 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> mem 0xdf2c0000-0xdf2dffff irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 [...] pci2: <ACPI PCI bus> on pcib2 [...] vgapci0: <VGA-compatible display> port 0xd000-0xd07f mem 0xde000000-0xdeffffff,0xdf000000-0xdf01ffff irq 16 at device 0.0 on pci2 [...] vgapci0: Boot video device [...] pcib3: <ACPI PCI-PCI bridge> mem 0xdf2a0000-0xdf2bffff irq 16 at device 2.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xdf100000-0xdf101fff irq 17 at device 0.0 on pci3 [...] xhci0: 64 bytes context size, 32-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pcib4: <ACPI PCI-PCI bridge> mem 0xdf280000-0xdf29ffff irq 20 at device 3.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pci0: <base peripheral, IOMMU> at device 15.0 (no driver attached) [...] igb0: <Intel(R) I354 (SGMII)> port 0xe0c0-0xe0df mem 0xdf260000-0xdf27ffff,0xdf2ec000-0xdf2effff irq 20 at device 20.0 on pci0 [...] igb0: EEPROM V1.0-5 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 8 RX queues 8 TX queues [...] igb0: Using MSI-X interrupts with 9 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb1: <Intel(R) I354 (SGMII)> port 0xe0a0-0xe0bf mem 0xdf240000-0xdf25ffff,0xdf2e8000-0xdf2ebfff irq 21 at device 20.1 on pci0 [...] igb1: EEPROM V1.0-5 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 8 RX queues 8 TX queues [...] igb1: Using MSI-X interrupts with 9 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb2: <Intel(R) I354 (SGMII)> port 0xe080-0xe09f mem 0xdf220000-0xdf23ffff,0xdf2e4000-0xdf2e7fff irq 22 at device 20.2 on pci0 [...] igb2: EEPROM V1.0-5 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 8 RX queues 8 TX queues [...] igb2: Using MSI-X interrupts with 9 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb3: <Intel(R) I354 (SGMII)> port 0xe060-0xe07f mem 0xdf200000-0xdf21ffff,0xdf2e0000-0xdf2e3fff irq 23 at device 20.3 on pci0 [...] igb3: EEPROM V1.0-5 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 8 RX queues 8 TX queues [...] igb3: Using MSI-X interrupts with 9 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 8/1024, RX 8/1024 [...] ehci0: <Intel Avoton USB 2.0 controller> mem 0xdf2f3000-0xdf2f33ff irq 23 at device 22.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] ahci0: <Intel Avoton AHCI SATA controller> port 0xe150-0xe157,0xe140-0xe143,0xe130-0xe137,0xe120-0xe123,0xe040-0xe05f mem 0xdf2f2000-0xdf2f27ff irq 19 at device 23.0 on pci0 [...] ahci0: AHCI v1.30 with 4 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahci1: <Intel Avoton AHCI SATA controller> port 0xe110-0xe117,0xe100-0xe103,0xe0f0-0xe0f7,0xe0e0-0xe0e3,0xe020-0xe03f mem 0xdf2f1000-0xdf2f17ff irq 19 at device 24.0 on pci0 [...] ahci1: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported [...] ahcich4: <AHCI channel> at channel 0 on ahci1 [...] ahcich5: <AHCI channel> at channel 1 on ahci1 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1208377091 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 usbus1 CAM [...] ugen0.1: <0x1912 XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ada0 at ahcich4 bus 0 scbus4 target 0 lun 0 [...] ada0: <INTEL SSDSC2BX100G4 G2010150> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 95396MB (195371568 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] uhub0: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] uhub1: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen1.2: <vendor 0x8087 product 0x07db> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x07db, class 9/0, rev 2.00/0.02, addr 2> on usbus1 [...] uhub2: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen1.3: <ACER INCORPORATED. Wireless KB/Touch Pad> at usbus1 [...] ukbd0 on uhub2 [...] ukbd0: <ACER INCORPORATED. Wireless KB/Touch Pad, class 0/0, rev 2.00/1.00, addr 3> on usbus1 [...] kbd1 at ukbd0 [...] ugen1.4: <vendor 0x0000 product 0x0001> at usbus1 [...] uhub3 on uhub2 [...] uhub3: <vendor 0x0000 product 0x0001, class 9/0, rev 2.00/0.00, addr 4> on usbus1 [...] uhub3: 4 ports with 3 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen1.5: <vendor 0x0557 product 0x2419> at usbus1 [...] ukbd1 on uhub3 [...] ukbd1: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 5> on usbus1 [...] kbd2 at ukbd1