[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p6 stable/24.7-n267981-8375762712f SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM)2 Quad CPU Q9505 @ 2.83GHz (2826.41-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x1067a Family=0x6 Model=0x17 Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0xc08e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,OSXSAVE> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: HLT,PAUSE [...] TSC: P-state invariant, performance statistics [...] real memory = 8594128896 (8196 MB) [...] avail memory = 8156733440 (7778 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <COMPAQ EAGLLAKE> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Address but zero Length: 0x0000000000000050/0x0 (20221020/tbfadt-796) [...] Firmware Warning (ACPI): Invalid length for FADT/Pm2ControlBlock: 0, using default 8 (20221020/tbfadt-850) [...] ioapic0: MADT APIC ID 1 != hw id 0 [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 3 2 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf9c00-0xf9c1e [...] smbios0: Version: 2.6, BCD Revision: 2.6 [...] aesni0: No AES or SHA support. [...] acpi0: <HPQOEM SLIC-BPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] device_attach: hpet0 attach returned 12 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] Firmware Error (ACPI): \134_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20221020/nsarguments-311) [...] Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20221020/dsfield-352) [...] ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20221020/dswload2-639) [...] ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20221020/psparse-689) [...] pcib0: _OSC failed: AE_ALREADY_EXISTS [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x2230-0x2237 mem 0xf0000000-0xf03fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] vgapci1: <VGA-compatible display> mem 0xf0400000-0xf04fffff at device 2.1 on pci0 [...] pci0: <simple comms> at device 3.0 (no driver attached) [...] atapci0: <Intel ATA controller> port 0x2238-0x223f,0x2260-0x2263,0x2240-0x2247,0x2264-0x2267,0x2220-0x222f irq 18 at device 3.2 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci0 [...] ata3: <ATA channel> at channel 1 on atapci0 [...] uart2: <4 Series Chipset Serial KT Controller> port 0x2248-0x224f mem 0xf0524000-0xf0524fff irq 17 at device 3.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) 82567LM-3 ICH10> port 0x2100-0x211f mem 0xf0500000-0xf051ffff,0xf0525000-0xf0525fff irq 19 at device 25.0 on pci0 [...] em0: EEPROM V0.5-3 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] uhci0: <UHCI (generic) USB controller> port 0x2120-0x213f irq 20 at device 26.0 on pci0 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <UHCI (generic) USB controller> port 0x2140-0x215f irq 21 at device 26.1 on pci0 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <UHCI (generic) USB controller> port 0x2160-0x217f irq 22 at device 26.2 on pci0 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf0527000-0xf05273ff irq 22 at device 26.7 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel 82801JD HDA Controller> mem 0xf0520000-0xf0523fff irq 21 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] Firmware Error (ACPI): \134_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20221020/nsarguments-311) [...] Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20221020/dsfield-352) [...] ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20221020/dswload2-639) [...] ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20221020/psparse-689) [...] pcib0: _OSC failed: AE_ALREADY_EXISTS [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0 [...] Firmware Error (ACPI): \134_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20221020/nsarguments-311) [...] Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20221020/dsfield-352) [...] ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20221020/dswload2-639) [...] ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20221020/psparse-689) [...] pcib0: _OSC failed: AE_ALREADY_EXISTS [...] pci2: <ACPI PCI bus> on pcib2 [...] em1: <Intel(R) Gigabit CT 82574L> port 0x1100-0x111f mem 0xf0680000-0xf069ffff,0xf0600000-0xf067ffff,0xf06a0000-0xf06a3fff irq 17 at device 0.0 on pci2 [...] em1: EEPROM V1.8-0 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] uhci3: <UHCI (generic) USB controller> port 0x2180-0x219f irq 20 at device 29.0 on pci0 [...] usbus4 on uhci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] uhci4: <UHCI (generic) USB controller> port 0x21a0-0x21bf irq 21 at device 29.1 on pci0 [...] usbus5 on uhci4 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] uhci5: <UHCI (generic) USB controller> port 0x21c0-0x21df irq 22 at device 29.2 on pci0 [...] usbus6 on uhci5 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf0528000-0xf05283ff irq 20 at device 29.7 on pci0 [...] usbus7: EHCI version 1.0 [...] usbus7 on ehci1 [...] usbus7: 480Mbps High Speed USB v2.0 [...] pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ath0: <Atheros 9220> mem 0xf0700000-0xf070ffff irq 20 at device 0.0 on pci3 [...] [ath] enabling AN_TOP2_FIXUP [...] ath0: [HT] enabling HT modes [...] ath0: [HT] 1 stream STBC receive enabled [...] ath0: [HT] 1 stream STBC transmit enabled [...] ath0: [HT] 2 RX streams; 2 TX streams [...] ath0: Enabling register serialisation [...] ath0: AR9220 mac 128.2 RF5133 phy 13.0 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <AHCI SATA controller> port 0x2250-0x2257,0x2268-0x226b,0x2258-0x225f,0x226c-0x226f,0x21e0-0x21ff mem 0xf0526000-0xf05267ff irq 18 at device 31.2 on pci0 [...] ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xe5800-0xeffff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1413124840 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen7.1: <Intel EHCI root HUB> at usbus7 [...] ugen4.1: <Intel UHCI root HUB> at usbus4 [...] ugen5.1: <Intel UHCI root HUB> at usbus5 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] uhub0 on usbus7 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 [...] uhub1 on usbus1 [...] uhub2 on usbus4 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] uhub3 on usbus5 [...] uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] ugen6.1: <Intel UHCI root HUB> at usbus6 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub4 on usbus6 [...] uhub5 on usbus2 [...] uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] uhub6 on usbus3 [...] uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] uhub7 on usbus0 [...] uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] hdacc0: <Realtek ALC662 rev1 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC662 rev1 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC662 rev1 (Rear Analog)> at nid 20 and 24 on hdaa0 [...] pcm1: <Realtek ALC662 rev1 (Analog)> at nid 21 and 25 on hdaa0 [...] pcm2: <Realtek ALC662 rev1 (Front Analog Headphones)> at nid 27 on hdaa0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub2: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub5: 2 ports with 2 removable, self powered [...] uhub4: 2 ports with 2 removable, self powered [...] uhub7: 2 ports with 2 removable, self powered [...] Root mount waiting for: CAM usbus3 usbus7 [...] ada0 at ahcich0 bus 0 scbus2 target 0 lun 0 [...] ada0: <INTEL SSDSC2CT180A4 335t> ACS-2 ATA SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 171705MB (351651888 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] cd0 at ahcich1 bus 0 scbus3 target 0 lun 0 [...] cd0: <hp DVD-RAM GH40L RB0E> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] Root mount waiting for: usbus3 usbus7 [...] uhub0: 6 ports with 6 removable, self powered [...] uhub6: 6 ports with 6 removable, self powered