[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p1 GENERIC amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 1280x720 [...] CPU: Intel(R) Core(TM) i5-7500T CPU @ 2.70GHz (2700.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906e9 Family=0x6 Model=0x9e Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x2000c04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16496279552 (15732 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM 829E > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 3 1 2 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xc9765000-0xc976501e [...] smbios0: Version: 3.0, BCD Revision: 3.0 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-BPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x1ff0000000-0x1ff0ffffff,0x1fe0000000-0x1fefffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Union Point USB 3.0 controller> mem 0xcea20000-0xcea2ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms, UART> at device 22.3 (no driver attached) [...] ahci0: <Intel Union Point AHCI SATA controller> port 0x3080-0x3087,0x3090-0x3093,0x3060-0x307f mem 0xcea34000-0xcea35fff,0xcea37000-0xcea370ff,0xcea36000-0xcea367ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <network> at device 0.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Kaby Lake-H HDA Controller> mem 0x1ff1010000-0x1ff1013fff,0x1ff1000000-0x1ff100ffff at device 31.3 on pci0 [...] em0: <Intel(R) I219-LM SPT(5)> mem 0xcea00000-0xcea1ffff at device 31.6 on pci0 [...] em0: EEPROM V0.1-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC-low" frequency 1355999828 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Conexant CX20632 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Conexant CX20632 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Conexant CX20632 (Analog)> at nid 31 and 26 on hdaa0 [...] pcm1: <Conexant CX20632 (Front Analog Headphones)> at nid 25 on hdaa0 [...] pcm2: <Conexant CX20632 (Front Analog Headphones)> at nid 28 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from ufs:/dev/gpt/rt03351 [rw,sync]... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <GOLDEN MEMORY-256GB W0825A0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 01', SATA Slot: scbus0 target 0 [...] Root mount waiting for: usbus0 [...] uhub0: 26 ports with 26 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Wacom Co.,Ltd. CTE-450> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.3: <Microsoft Comfort Curve Keyboard 2000> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device HP v212w (0x03f0:0xa240) [...] Root mount waiting for: usbus0 [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device HP v212w (0x03f0:0xa240) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device HP v212w (0x03f0:0xa240) [...] ugen0.4: <HP v212w> at usbus0 [...] umass0 on uhub0 [...] umass0: <HP v212w, class 0/0, rev 2.00/1.00, addr 3> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x8101 [...] umass0:2:0: Attached to scbus2 [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <hp v212w PMAP> Removable Direct Access SPC-2 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 29604MB (60628992 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] Root mount waiting for: usbus0 [...] ugen0.5: <vendor 0x8087 product 0x0a2a> at usbus0 [...] WARNING: / was not properly dismounted [...] WARNING: /: mount pending error: blocks 8 files 0 [...] warning: KLD '/boot/kernel/iic.ko' is newer than the linker.hints file [...] warning: KLD '/boot/kernel/linuxkpi_hdmi.ko' is newer than the linker.hints file [...] warning: KLD '/boot/kernel/lindebugfs.ko' is newer than the linker.hints file [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] [drm] Got stolen memory base 0xcc800000, size 0x2000000 [...] kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/kbl_dmc_ver1_04.bin either [...] i915/kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/i915/kbl_dmc_ver1_04.bin either [...] i915_kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/i915_kbl_dmc_ver1_04.bin either [...] drmn0: successfully loaded firmware image 'i915/kbl_dmc_ver1_04.bin' [...] drmn0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [...] lkpi_iic0: <LinuxKPI I2C> on drmn0 [...] iicbus0: <Philips I2C bus> on lkpi_iic0 [...] iic0: <I2C generic I/O> on iicbus0 [...] lkpi_iic1: <LinuxKPI I2C> on drmn0 [...] iicbus1: <Philips I2C bus> on lkpi_iic1 [...] iic1: <I2C generic I/O> on iicbus1 [...] lkpi_iic2: <LinuxKPI I2C> on drmn0 [...] iicbus2: <Philips I2C bus> on lkpi_iic2 [...] iic2: <I2C generic I/O> on iicbus2 [...] drmn0: [drm] failed to retrieve link info, disabling eDP [...] drmn0: [drm] [ENCODER:94:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [...] drmn0: [drm] [ENCODER:109:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] lkpi_iic3: <LinuxKPI I2C> on drm1 [...] iicbus3: <Philips I2C bus> on lkpi_iic3 [...] iic3: <I2C generic I/O> on iicbus3 [...] lkpi_iic4: <LinuxKPI I2C> on drm3 [...] iicbus4: <Philips I2C bus> on lkpi_iic4 [...] iic4: <I2C generic I/O> on iicbus4 [...] lkpi_iic5: <LinuxKPI I2C> on drm5 [...] iicbus5: <Philips I2C bus> on lkpi_iic5 [...] iic5: <I2C generic I/O> on iicbus5 [...] [drm] Initialized i915 1.6.0 20201103 for drmn0 on minor 0 [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=720 width=1280 depth=32 [...] pbase=0x1fe0000000 vbase=0xfffffe00f5200000 [...] name=drmn0 flags=0x0 stride=5120 bpp=32 [...] end FB_INFO [...] warning: KLD '/boot/kernel/acpi_wmi.ko' is newer than the linker.hints file [...] warning: KLD '/boot/kernel/ichsmb.ko' is newer than the linker.hints file [...] warning: KLD '/boot/kernel/smbus.ko' is newer than the linker.hints file [...] warning: KLD '/boot/kernel/if_iwlwifi.ko' is newer than the linker.hints file [...] Intel(R) Wireless WiFi based driver for FreeBSD [...] ichsmb0: <Intel Kaby Lake SMBus controller> port 0xefa0-0xefbf mem 0x1ff1014000-0x1ff10140ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] iwm0: <Intel(R) Dual Band Wireless AC 7265> mem 0xce900000-0xce901fff at device 0.0 on pci1 [...] iwm0: hw rev 0x210, fw ver 22.361476.0, address XXX [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMIB.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WMIV.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: Embedded MOF found [...] wlan0: Ethernet address: ... [...] tap10: Ethernet address: ... [...] bridge10: Ethernet address: ... [...] em0: link state changed to UP [...] em0: changing name to 'lan0' [...] tap10: changing name to 'ajdns' [...] bridge10: changing name to 'bhyvemgr0' [...] lo1: changing name to 'appjail0' [...] lo0: link state changed to UP [...] lan0: link state changed to DOWN [...] lan0: link state changed to UP [...] warning: KLD '/boot/kernel/pflog.ko' is newer than the linker.hints file [...] warning: KLD '/boot/kernel/pf.ko' is newer than the linker.hints file [...] pflog0: promiscuous mode enabled [...] wlan0: link state changed to UP [...] warning: KLD '/boot/kernel/uhid.ko' is newer than the linker.hints file [...] warning: KLD '/boot/kernel/ums.ko' is newer than the linker.hints file [...] ums0 on uhub0 [...] ums0: <Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1> on usbus0 [...] ums0: 3 buttons and [XYZ] coordinates ID=1 [...] uhid0 on uhub0 [...] uhid0: <Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2> on usbus0 [...] warning: KLD '/boot/kernel/wmt.ko' is newer than the linker.hints file [...] ugen0.5: <vendor 0x8087 product 0x0a2a> at usbus0 (disconnected) [...] warning: KLD '/boot/kernel/ng_ubt.ko' is newer than the linker.hints file [...] warning: KLD '/boot/kernel/netgraph.ko' is newer than the linker.hints file [...] warning: KLD '/boot/kernel/ng_hci.ko' is newer than the linker.hints file [...] warning: KLD '/boot/kernel/ng_bluetooth.ko' is newer than the linker.hints file [...] ugen0.5: <vendor 0x8087 product 0x0a2a> at usbus0 [...] lan0: link state changed to DOWN [...] nd6_setmtu0: new link MTU on lan0 (576) is too small for IPv6 [...] ng_ubt: HCI command 0x0c03 timed out [...] lan0: link state changed to UP [...] ng_ubt: HCI command 0x0c03 timed out