[...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE-p4 r369361 NOMADBSD amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(vga): text 80x25 [...] CPU: Pentium(R) Dual-Core CPU E5800 @ 3.20GHz (3200.01-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x1067a Family=0x6 Model=0x17 Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0xc00e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE,OSXSAVE> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: HLT,PAUSE [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 4099768320 (3909 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <060110 APIC1940> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 [...] Timecounter "TSC-low" frequency 1600005968 Hz quality 1000 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] 000.000023 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8110fd00, 0) error 19 [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ACRSYS ACRPRDCT> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xd0000000-0xdfffffff,0xfe9e0000-0xfe9fffff irq 16 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <ATI RV910 HDA Controller> mem 0xfe9bc000-0xfe9bffff irq 17 at device 0.1 on pci1 [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xcc00-0xcc1f mem 0xfe8e0000-0xfe8fffff,0xfe8df000-0xfe8dffff irq 20 at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xc880-0xc89f irq 16 at device 26.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xc800-0xc81f irq 21 at device 26.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xc480-0xc49f irq 19 at device 26.2 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xfe8dec00-0xfe8defff irq 18 at device 26.7 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel 82801JI HDA Controller> mem 0xfe8d8000-0xfe8dbfff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] ath0: <Atheros 5418> mem 0xfeaf0000-0xfeafffff irq 16 at device 0.0 on pci2 [...] ath0: [HT] enabling HT modes [...] ath0: [HT] RTS aggregates limited to 8 KiB [...] ath0: [HT] 2 RX streams; 2 TX streams [...] ath0: AR5418 mac 12.10 RF2133 phy 8.1 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00d0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pci3: <serial bus, FireWire> at device 0.0 (no driver attached) [...] uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xc400-0xc41f irq 23 at device 29.0 on pci0 [...] uhci3: LegSup = 0x2f00 [...] usbus4 on uhci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xc080-0xc09f irq 19 at device 29.1 on pci0 [...] uhci4: LegSup = 0x2f00 [...] usbus5 on uhci4 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xc000-0xc01f irq 18 at device 29.2 on pci0 [...] uhci5: LegSup = 0x2f00 [...] usbus6 on uhci5 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xfe8de800-0xfe8debff irq 23 at device 29.7 on pci0 [...] usbus7: EHCI version 1.0 [...] usbus7 on ehci1 [...] usbus7: 480Mbps High Speed USB v2.0 [...] pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH8+ (RAID) AHCI SATA controller> port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb41f mem 0xfe8de000-0xfe8de7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] psm0: model IntelliMouse, device ID 3 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] hdac1: Command 0x300f0000 timeout on address 3 [...] hdac1: Command 0x300f0002 timeout on address 3 [...] hdac1: CODEC at address 3 not responding! [...] hdacc1: <Realtek ALC888 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC888 (Analog 7.1+HP/2.0)> at nid 20,22,21,23,27 and 24,25,28 on hdaa1 [...] pcm2: <Realtek ALC888 (Digital)> at nid 30 on hdaa1 [...] pcm3: <Realtek ALC888 (Rear Digital)> at nid 17 on hdaa1 [...] ugen6.1: <Intel UHCI root HUB> at usbus6 [...] ugen5.1: <Intel UHCI root HUB> at usbus5 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] ugen7.1: <Intel EHCI root HUB> at usbus7 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] ugen4.1: <Intel UHCI root HUB> at usbus4 [...] uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] Trying to mount root from ufs:/dev/label/nomadroot [rw,noatime]... [...] Root mount waiting for: usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 usbus6 usbus7 CAM [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST1000LX015-1U7172 SDM1> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 953869MB (1953525168 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ada1 at ahcich4 bus 0 scbus4 target 0 lun 0 [...] ada1: <MAXTOR STM3250310AS 3.AAC> ATA-7 SATA 1.x device [...] ada1: Serial Number... [...] ada1: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 238474MB (488395055 512 byte sectors) [...] ses0: pass1,cd0 in 'Slot 01', SATA Slot: scbus1 target 0 [...] ses0: pass2,ada1 in 'Slot 04', SATA Slot: scbus4 target 0 [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <HL-DT-ST BD-RE WH14NS40 1.04> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] uhub4: 2 ports with 2 removable, self powered [...] uhub6: 2 ports with 2 removable, self powered [...] uhub7: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub5: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus3 usbus7 [...] Root mount waiting for: usbus3 usbus7 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub2: 6 ports with 6 removable, self powered [...] Root mount waiting for: usbus7 [...] ugen7.2: <Kingston DT 101 G2> at usbus7 [...] umass0 on uhub2 [...] umass0: <Kingston DT 101 G2, class 0/0, rev 2.00/1.00, addr 2> on usbus7 [...] umass0: SCSI over Bulk-Only; quirks = 0x8100 [...] umass0:7:0: Attached to scbus7 [...] da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 [...] da0: <Kingston DT 101 G2 PMAP> Removable Direct Access SPC-2 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 7554MB (15470592 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] Root mount waiting for: usbus7 [...] Root mount waiting for: usbus7 [...] ugen7.3: <Western Digital My Passport 25E2> at usbus7 [...] umass1 on uhub2 [...] umass1: <Western Digital My Passport 25E2, class 0/0, rev 2.10/40.05, addr 3> on usbus7 [...] umass1: SCSI over Bulk-Only; quirks = 0x8000 [...] umass1:8:1: Attached to scbus8 [...] da1 at umass-sim1 bus 1 scbus8 target 0 lun 0 [...] da1: <WD My Passport 25E2 4005> Fixed Direct Access SPC-4 SCSI device [...] da1: Serial Number... [...] da1: 40.000MB/s transfers [...] da1: 3815415MB (7813969920 512 byte sectors) [...] da1: quirks=0x2<NO_6_BYTE> [...] ses1 at umass-sim1 bus 1 scbus8 target 0 lun 1 [...] ses1: <WD SES Device 4005> Fixed Enclosure Services SPC-4 SCSI device [...] ses1: Serial Number... [...] ses1: 40.000MB/s transfers [...] ses1: SES Device [...] ugen7.4: <Generic Mass Storage Device> at usbus7 [...] umass2 on uhub2 [...] umass2: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 4> on usbus7 [...] umass2: SCSI over Bulk-Only; quirks = 0xc000 [...] umass2:9:2: Attached to scbus9 [...] da2 at umass-sim2 bus 2 scbus9 target 0 lun 0 [...] da2: <Generic Compact Flash 0.00> Removable Direct Access SCSI-2 device [...] da2: Serial Number... [...] da2: 40.000MB/s transfers [...] da2: Attempt to query device size failed: NOT READY, Medium not present [...] da2: quirks=0x2<NO_6_BYTE> [...] da3 at umass-sim2 bus 2 scbus9 target 0 lun 1 [...] da3: <Generic SD/MMC 0.00> Removable Direct Access SCSI-2 device [...] da3: Serial Number... [...] da3: 40.000MB/s transfers [...] da3: Attempt to query device size failed: NOT READY, Medium not present [...] da3: quirks=0x2<NO_6_BYTE> [...] da4 at umass-sim2 bus 2 scbus9 target 0 lun 2 [...] da4: <Generic microSD 0.00> Removable Direct Access SCSI-2 device [...] da4: Serial Number... [...] da4: 40.000MB/s transfers [...] da4: Attempt to query device size failed: NOT READY, Medium not present [...] da4: quirks=0x2<NO_6_BYTE> [...] da5 at umass-sim2 bus 2 scbus9 target 0 lun 3 [...] da5: <Generic MS/MS-PRO 0.00> Removable Direct Access SCSI-2 device [...] da5: Serial Number... [...] da5: 40.000MB/s transfers [...] da5: Attempt to query device size failed: NOT READY, Medium not present [...] da5: quirks=0x2<NO_6_BYTE> [...] da6 at umass-sim2 bus 2 scbus9 target 0 lun 4 [...] da6: <Generic SM/xD-Picture 0.00> Removable Direct Access SCSI-2 device [...] da6: Serial Number... [...] da6: 40.000MB/s transfers [...] da6: Attempt to query device size failed: NOT READY, Medium not present [...] da6: quirks=0x2<NO_6_BYTE> [...] WARNING: /: TRIM flag on fs but disk does not support TRIM [...] GEOM_ELI: Device label/nomaddata.eli created. [...] GEOM_ELI: Encryption: AES-XTS 256 [...] GEOM_ELI: Crypto: software [...] WARNING: /data: TRIM flag on fs but disk does not support TRIM [...] Cuse v0.1.36 @ /dev/cuse [...] lo0: link state changed to UP [...] wlan1: Ethernet address: ... [...] wlan1: Ethernet address: ... [...] wlan1: link state changed to UP [...] wlan1: link state changed to DOWN [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] [drm] radeon kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x174B:0xA004 0x00). [...] [drm:radeon_device_init] Unable to find PCI I/O BAR [...] [drm:radeon_atombios_init] Unable to find PCI I/O BAR; using MMIO for ATOM IIO [...] ATOM BIOS: R5 [...] drmn0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used) [...] drmn0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF [...] Failed to add WC MTRR for [0xd0000000-0xdfffffff]: -22; performance may suffer [...] [drm] Detected VRAM RAM=2048M, BAR=256M [...] [drm] RAM width 64bits DDR [...] [TTM] Zone kernel: Available graphics memory: 2077732 kiB [...] [TTM] Initializing pool allocator [...] [drm] radeon: 2048M of VRAM memory ready [...] [drm] radeon: 1024M of GTT memory ready. [...] [drm] Loading CAICOS Microcode [...] radeon/CAICOS_pfp.bin: could not load firmware image, error 2 [...] drmn0: fail (0) to get firmware image with name: radeon/CAICOS_pfp.bin [...] drmn0: successfully loaded firmware image with mapped name: radeon_CAICOS_pfp_bin [...] radeon/CAICOS_me.bin: could not load firmware image, error 2 [...] drmn0: fail (0) to get firmware image with name: radeon/CAICOS_me.bin [...] drmn0: successfully loaded firmware image with mapped name: radeon_CAICOS_me_bin [...] radeon/BTC_rlc.bin: could not load firmware image, error 2 [...] drmn0: fail (0) to get firmware image with name: radeon/BTC_rlc.bin [...] drmn0: successfully loaded firmware image with mapped name: radeon_BTC_rlc_bin [...] radeon/CAICOS_mc.bin: could not load firmware image, error 2 [...] drmn0: fail (0) to get firmware image with name: radeon/CAICOS_mc.bin [...] drmn0: successfully loaded firmware image with mapped name: radeon_CAICOS_mc_bin [...] radeon/CAICOS_smc.bin: could not load firmware image, error 2 [...] drmn0: fail (0) to get firmware image with name: radeon/CAICOS_smc.bin [...] drmn0: successfully loaded firmware image with mapped name: radeon_CAICOS_smc_bin [...] [drm] Internal thermal controller without fan control [...] [drm] radeon: dpm initialized [...] radeon/SUMO_uvd.bin: could not load firmware image, error 2 [...] drmn0: fail (0) to get firmware image with name: radeon/SUMO_uvd.bin [...] drmn0: successfully loaded firmware image with mapped name: radeon_SUMO_uvd_bin [...] [drm] GART: num cpu pages 262144, num gpu pages 262144 [...] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [...] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). [...] drmn0: WB enabled [...] drmn0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x0xfffff80007be6c00 [...] drmn0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x0xfffff80007be6c0c [...] drmn0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x0xfffff800d0072118 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] drmn0: radeon: MSI limited to 32-bit [...] drmn0: radeon: using MSI. [...] [drm] radeon: irq initialized. [...] [drm] ring test on 0 succeeded in 1 usecs [...] [drm] ring test on 3 succeeded in 3 usecs [...] [drm] ring test on 5 succeeded in 1 usecs [...] [drm] UVD initialized successfully. [...] [drm] ib test on ring 0 succeeded in 0 usecs [...] [drm] ib test on ring 3 succeeded in 0 usecs [...] [drm] ib test on ring 5 succeeded [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DVI-D-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DVI-D-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector VGA-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.VGA-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Radeon Display Connectors [...] [drm] Connector 0: [...] [drm] HDMI-A-1 [...] [drm] HPD2 [...] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [...] [drm] Encoders: [...] [drm] DFP1: INTERNAL_UNIPHY1 [...] [drm] Connector 1: [...] [drm] DVI-D-1 [...] [drm] HPD4 [...] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [...] [drm] Encoders: [...] [drm] DFP2: INTERNAL_UNIPHY [...] [drm] Connector 2: [...] [drm] VGA-1 [...] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [...] [drm] Encoders: [...] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [...] [drm] fb mappable at 0xD0363000 [...] [drm] vram apper at 0xD0000000 [...] [drm] size 4325376 [...] [drm] fb depth is 24 [...] [drm] pitch is 5632 [...] VT: Replacing driver "vga" with new "fb". [...] start FB_INFO: [...] type=11 height=768 width=1360 depth=32 [...] cmsize=16 size=4325376 [...] pbase=0xd0363000 vbase=0xfffff800d0363000 [...] name=drmn0 flags=0x0 stride=5632 bpp=32 [...] cmap[0]=141414 cmap[1]=ba5451 cmap[2]=8e9b60 cmap[3]=eabf77 [...] end FB_INFO [...] drmn0: fb0: radeondrmfb frame buffer device [...] [drm] Initialized radeon 2.50.0 20080528 for drmn0 on minor 0 [...] ichwd0: <Intel ICH10R watchdog timer> on isa0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] device_attach: acpi_wmi0 attach returned 6 [...] GEOM_SCHED: Initializing global data. [...] GEOM_SCHED: Loading: mp = 0xffffffff829c5480, g_sched_class = 0xffffffff829c5480. [...] GEOM_SCHED: Modevent 0. [...] GEOM_SCHED: Loaded module rr error 0. [...] GEOM_SCHED: Device da0.sched. created. [...] wlan1: link state changed to UP