[...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p12-HBSD #0 3c6040c7243(stable/21.1)-dirty: Mon Jan 25 12:27:52 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 1024x768 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Xeon(R) E-2274G CPU @ 4.00GHz (4008.31-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0x9c002600<MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16290095104 (15535 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL PE_SC3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 2 5 6 4 3 7 [...] Timecounter "TSC-low" frequency 2004156836 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128f7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000058 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <DELL PE_SC3> on motherboard [...] acpi0: Power Button (fixed) [...] unknown: memory range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0x7c000000-0x7c3fffff,0x7c404000-0x7c407fff at device 0.0 on pci1 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 4 RX queues 4 TX queues [...] ix0: Using MSI-X interrupts with 5 vectors [...] ix0: allocated for 4 queues [...] ix0: allocated for 4 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0x7bc00000-0x7bffffff,0x7c400000-0x7c403fff at device 0.1 on pci1 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 4 RX queues 4 TX queues [...] ix1: Using MSI-X interrupts with 5 vectors [...] ix1: allocated for 4 queues [...] ix1: allocated for 4 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: netmap queues/slots: TX 4/2048, RX 4/2048 [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0x7d200000-0x7d20ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.4 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x2040-0x2047,0x2048-0x204b,0x2020-0x203f mem 0x7d212000-0x7d213fff,0x7d21d000-0x7d21d0ff,0x7d21c000-0x7d21c7ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] ix2: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0x7cc00000-0x7cffffff,0x7d004000-0x7d007fff at device 0.0 on pci2 [...] ix2: Using 2048 TX descriptors and 2048 RX descriptors [...] ix2: Using 4 RX queues 4 TX queues [...] ix2: Using MSI-X interrupts with 5 vectors [...] ix2: allocated for 4 queues [...] ix2: allocated for 4 rx queues [...] ix2: Ethernet address: ... [...] ix2: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix2: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix3: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0x7c800000-0x7cbfffff,0x7d000000-0x7d003fff at device 0.1 on pci2 [...] ix3: Using 2048 TX descriptors and 2048 RX descriptors [...] ix3: Using 4 RX queues 4 TX queues [...] ix3: Using MSI-X interrupts with 5 vectors [...] ix3: allocated for 4 queues [...] ix3: allocated for 4 rx queues [...] ix3: Ethernet address: ... [...] ix3: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix3: netmap queues/slots: TX 4/2048, RX 4/2048 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <PCI-PCI bridge> at device 0.0 on pci3 [...] pci4: <PCI bus> on pcib4 [...] vgapci0: <VGA-compatible display> mem 0x7a000000-0x7affffff,0x7b808000-0x7b80bfff,0x7b000000-0x7b7fffff at device 0.0 on pci4 [...] vgapci0: Boot video device [...] pcib5: <ACPI PCI-PCI bridge> at device 28.1 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] bge0: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x7d130000-0x7d13ffff,0x7d140000-0x7d14ffff,0x7d150000-0x7d15ffff at device 0.0 on pci5 [...] bge0: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus0: <MII bus> on bge0 [...] brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Using defaults for TSO: 65518/35/2048 [...] bge0: Ethernet address: ... [...] bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x7d100000-0x7d10ffff,0x7d110000-0x7d11ffff,0x7d120000-0x7d12ffff at device 0.1 on pci5 [...] bge1: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus1: <MII bus> on bge1 [...] brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge1: Using defaults for TSO: 65518/35/2048 [...] bge1: Ethernet address: ... [...] pci0: <simple comms> at device 30.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xed800-0xf17ff pnpid ORM0000 on isa0 [...] vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff pnpid PNP0900 on isa0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 271c00002c00 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 272500002c00 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 271f00002c00 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 271f00002c00 [...] device_attach: est3 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 271d00002c00 [...] device_attach: est4 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 271c00002c00 [...] device_attach: est5 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 272600002c00 [...] device_attach: est6 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 272400002c00 [...] device_attach: est7 attach returned 6 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SAMSUNG MZ7KM240HMHQ-00005 GXM5104Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <SAMSUNG MZ7KM240HMHQ-00005 GXM5304Q> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 228936MB (468862128 512 byte sectors) [...] ada1: quirks=0x1<4K> [...] GEOM: ada0: the secondary GPT header is not in the last LBA. [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] GEOM: ada1: the secondary GPT header is not in the last LBA. [...] GEOM_MIRROR: Device mirror/OPNsense launched (2/2). [...] uhub0: 26 ports with 26 removable, self powered [...] ugen0.2: <vendor 0x1604 product 0x10c0> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 1> on usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <vendor 0x1604 product 0x10c0> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] uhub2: 4 ports with 4 removable, self powered [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] ugen0.4: <DELLEMC DRAC 5 Virtual Keyboard and Mouse> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <HID Interface> on usbus0 [...] kbd1 at ukbd0 [...] ix2: link state changed to UP [...] ugen0.5: <vendor 0x1604 product 0x10c0> at usbus0 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 4> on usbus0 [...] ix2: link state changed to DOWN [...] uhub3: 4 ports with 4 removable, self powered [...] ums0 on uhub1 [...] ums0: <HID Interface> on usbus0 [...] ums0: 3 buttons and [Z] coordinates ID=0 [...] ix2: link state changed to UP [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] bge1: link state changed to DOWN [...] bge1: link state changed to UP [...] bge1: link state changed to DOWN [...] bge1: link state changed to UP [...] bge0: link state changed to DOWN [...] bge0: link state changed to UP [...] bge0: link state changed to DOWN [...] bge0: link state changed to UP [...] bge0: link state changed to DOWN [...] bge0: link state changed to UP [...] bge0: link state changed to DOWN [...] bge0: link state changed to UP [...] bge0: link state changed to DOWN [...] bge0: link state changed to UP [...] arp: XXX is using my IP address XXX.XXX.XXX.XXX on bge1! [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p12-HBSD #0 3c6040c7243(stable/21.1)-dirty: Mon Jan 25 12:27:52 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 1024x768 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Xeon(R) E-2274G CPU @ 4.00GHz (4008.22-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0x9c002600<MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16290095104 (15535 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL PE_SC3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 2 4 6 5 3 7 [...] Timecounter "TSC-low" frequency 2004112493 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128f7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000058 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <DELL PE_SC3> on motherboard [...] acpi0: Power Button (fixed) [...] unknown: memory range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0x7c000000-0x7c3fffff,0x7c404000-0x7c407fff at device 0.0 on pci1 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 4 RX queues 4 TX queues [...] ix0: Using MSI-X interrupts with 5 vectors [...] ix0: allocated for 4 queues [...] ix0: allocated for 4 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0x7bc00000-0x7bffffff,0x7c400000-0x7c403fff at device 0.1 on pci1 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 4 RX queues 4 TX queues [...] ix1: Using MSI-X interrupts with 5 vectors [...] ix1: allocated for 4 queues [...] ix1: allocated for 4 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: netmap queues/slots: TX 4/2048, RX 4/2048 [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0x7d200000-0x7d20ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.4 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x2040-0x2047,0x2048-0x204b,0x2020-0x203f mem 0x7d212000-0x7d213fff,0x7d21d000-0x7d21d0ff,0x7d21c000-0x7d21c7ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] ix2: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0x7cc00000-0x7cffffff,0x7d004000-0x7d007fff at device 0.0 on pci2 [...] ix2: Using 2048 TX descriptors and 2048 RX descriptors [...] ix2: Using 4 RX queues 4 TX queues [...] ix2: Using MSI-X interrupts with 5 vectors [...] ix2: allocated for 4 queues [...] ix2: allocated for 4 rx queues [...] ix2: Ethernet address: ... [...] ix2: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix2: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix3: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0x7c800000-0x7cbfffff,0x7d000000-0x7d003fff at device 0.1 on pci2 [...] ix3: Using 2048 TX descriptors and 2048 RX descriptors [...] ix3: Using 4 RX queues 4 TX queues [...] ix3: Using MSI-X interrupts with 5 vectors [...] ix3: allocated for 4 queues [...] ix3: allocated for 4 rx queues [...] ix3: Ethernet address: ... [...] ix3: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix3: netmap queues/slots: TX 4/2048, RX 4/2048 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <PCI-PCI bridge> at device 0.0 on pci3 [...] pci4: <PCI bus> on pcib4 [...] vgapci0: <VGA-compatible display> mem 0x7a000000-0x7affffff,0x7b808000-0x7b80bfff,0x7b000000-0x7b7fffff at device 0.0 on pci4 [...] vgapci0: Boot video device [...] pcib5: <ACPI PCI-PCI bridge> at device 28.1 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] bge0: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x7d130000-0x7d13ffff,0x7d140000-0x7d14ffff,0x7d150000-0x7d15ffff at device 0.0 on pci5 [...] bge0: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus0: <MII bus> on bge0 [...] brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Using defaults for TSO: 65518/35/2048 [...] bge0: Ethernet address: ... [...] bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x7d100000-0x7d10ffff,0x7d110000-0x7d11ffff,0x7d120000-0x7d12ffff at device 0.1 on pci5 [...] bge1: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus1: <MII bus> on bge1 [...] brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge1: Using defaults for TSO: 65518/35/2048 [...] bge1: Ethernet address: ... [...] pci0: <simple comms> at device 30.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xed800-0xf17ff pnpid ORM0000 on isa0 [...] vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff pnpid PNP0900 on isa0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 271c00002c00 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 272600002c00 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 271d00002c00 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 271d00002c00 [...] device_attach: est3 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 272600002c00 [...] device_attach: est4 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 271c00002c00 [...] device_attach: est5 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 271d00002c00 [...] device_attach: est6 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 270b00002c00 [...] device_attach: est7 attach returned 6 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SAMSUNG MZ7KM240HMHQ-00005 GXM5104Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <SAMSUNG MZ7KM240HMHQ-00005 GXM5304Q> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 228936MB (468862128 512 byte sectors) [...] ada1: quirks=0x1<4K> [...] GEOM: ada0: the secondary GPT header is not in the last LBA. [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] GEOM: ada1: the secondary GPT header is not in the last LBA. [...] GEOM_MIRROR: Device mirror/OPNsense launched (1/2). [...] GEOM_MIRROR: Device OPNsense: rebuilding provider ada0. [...] WARNING: /mnt was not properly dismounted [...] WARNING: /mnt: mount pending error: blocks 8 files 0 [...] WARNING: /mnt: reload pending error: blocks 8 files 0 [...] uhub0: 26 ports with 26 removable, self powered [...] ugen0.2: <vendor 0x1604 product 0x10c0> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 1> on usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <vendor 0x1604 product 0x10c0> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] uhub2: 4 ports with 4 removable, self powered [...] ugen0.4: <DELLEMC DRAC 5 Virtual Keyboard and Mouse> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <HID Interface> on usbus0 [...] kbd1 at ukbd0 [...] ugen0.5: <vendor 0x1604 product 0x10c0> at usbus0 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 4> on usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] ums0 on uhub1 [...] ums0: <HID Interface> on usbus0 [...] ums0: 3 buttons and [Z] coordinates ID=0 [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] ix2: link state changed to UP [...] ix2: link state changed to DOWN [...] ix2: link state changed to UP [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] ix0: link state changed to DOWN [...] ix1: link state changed to DOWN [...] bge0: link state changed to DOWN [...] bge1: link state changed to DOWN [...] bge0: link state changed to UP [...] bge1: link state changed to UP [...] ix1: link state changed to UP [...] ix0: link state changed to UP [...] GEOM_MIRROR: Device OPNsense: rebuilding provider ada0 finished. [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 1 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p13-HBSD #0 5a415173060(stable/21.1)-dirty: Fri Feb 5 16:41:22 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 1024x768 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Xeon(R) E-2274G CPU @ 4.00GHz (4008.29-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0x9c002600<MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16290095104 (15535 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL PE_SC3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 2 4 6 5 3 7 [...] Timecounter "TSC-low" frequency 2004144517 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000058 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <DELL PE_SC3> on motherboard [...] acpi0: Power Button (fixed) [...] unknown: memory range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0x7c000000-0x7c3fffff,0x7c404000-0x7c407fff at device 0.0 on pci1 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 4 RX queues 4 TX queues [...] ix0: Using MSI-X interrupts with 5 vectors [...] ix0: allocated for 4 queues [...] ix0: allocated for 4 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0x7bc00000-0x7bffffff,0x7c400000-0x7c403fff at device 0.1 on pci1 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 4 RX queues 4 TX queues [...] ix1: Using MSI-X interrupts with 5 vectors [...] ix1: allocated for 4 queues [...] ix1: allocated for 4 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: netmap queues/slots: TX 4/2048, RX 4/2048 [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0x7d200000-0x7d20ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.4 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x2040-0x2047,0x2048-0x204b,0x2020-0x203f mem 0x7d212000-0x7d213fff,0x7d21d000-0x7d21d0ff,0x7d21c000-0x7d21c7ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] ix2: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0x7cc00000-0x7cffffff,0x7d004000-0x7d007fff at device 0.0 on pci2 [...] ix2: Using 2048 TX descriptors and 2048 RX descriptors [...] ix2: Using 4 RX queues 4 TX queues [...] ix2: Using MSI-X interrupts with 5 vectors [...] ix2: allocated for 4 queues [...] ix2: allocated for 4 rx queues [...] ix2: Ethernet address: ... [...] ix2: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix2: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix3: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0x7c800000-0x7cbfffff,0x7d000000-0x7d003fff at device 0.1 on pci2 [...] ix3: Using 2048 TX descriptors and 2048 RX descriptors [...] ix3: Using 4 RX queues 4 TX queues [...] ix3: Using MSI-X interrupts with 5 vectors [...] ix3: allocated for 4 queues [...] ix3: allocated for 4 rx queues [...] ix3: Ethernet address: ... [...] ix3: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix3: netmap queues/slots: TX 4/2048, RX 4/2048 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <PCI-PCI bridge> at device 0.0 on pci3 [...] pci4: <PCI bus> on pcib4 [...] vgapci0: <VGA-compatible display> mem 0x7a000000-0x7affffff,0x7b808000-0x7b80bfff,0x7b000000-0x7b7fffff at device 0.0 on pci4 [...] vgapci0: Boot video device [...] pcib5: <ACPI PCI-PCI bridge> at device 28.1 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] bge0: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x7d130000-0x7d13ffff,0x7d140000-0x7d14ffff,0x7d150000-0x7d15ffff at device 0.0 on pci5 [...] bge0: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus0: <MII bus> on bge0 [...] brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Using defaults for TSO: 65518/35/2048 [...] bge0: Ethernet address: ... [...] bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x7d100000-0x7d10ffff,0x7d110000-0x7d11ffff,0x7d120000-0x7d12ffff at device 0.1 on pci5 [...] bge1: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus1: <MII bus> on bge1 [...] brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge1: Using defaults for TSO: 65518/35/2048 [...] bge1: Ethernet address: ... [...] pci0: <simple comms> at device 30.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xed800-0xf17ff pnpid ORM0000 on isa0 [...] vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff pnpid PNP0900 on isa0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 271d00002c00 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 271800002c00 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 271a00002c00 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 272500002c00 [...] device_attach: est3 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 271d00002c00 [...] device_attach: est4 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 272200002c00 [...] device_attach: est5 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 271d00002c00 [...] device_attach: est6 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 271c00002c00 [...] device_attach: est7 attach returned 6 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SAMSUNG MZ7KM240HMHQ-00005 GXM5104Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <SAMSUNG MZ7KM240HMHQ-00005 GXM5304Q> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 228936MB (468862128 512 byte sectors) [...] ada1: quirks=0x1<4K> [...] GEOM: ada0: the secondary GPT header is not in the last LBA. [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] GEOM: ada1: the secondary GPT header is not in the last LBA. [...] GEOM_MIRROR: Device mirror/OPNsense launched (2/2). [...] uhub0: 26 ports with 26 removable, self powered [...] ugen0.2: <vendor 0x1604 product 0x10c0> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 1> on usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <vendor 0x1604 product 0x10c0> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] uhub2: 4 ports with 4 removable, self powered [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] ugen0.4: <DELLEMC DRAC 5 Virtual Keyboard and Mouse> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <HID Interface> on usbus0 [...] kbd1 at ukbd0 [...] ugen0.5: <vendor 0x1604 product 0x10c0> at usbus0 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 4> on usbus0 [...] bge1: link state changed to DOWN [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] uhub3: 4 ports with 4 removable, self powered [...] ums0 on uhub1 [...] ums0: <HID Interface> on usbus0 [...] ums0: 3 buttons and [Z] coordinates ID=0 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] bge1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ix0: link state changed to UP [...] lagg0: IPv6 addresses on ix0 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] lagg0: link state changed to UP [...] ix1: link state changed to UP [...] lagg0: IPv6 addresses on ix1 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] ix1: link state changed to DOWN [...] ix0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] ix2: link state changed to UP [...] lagg0: IPv6 addresses on ix2 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] ix2: link state changed to DOWN [...] lagg0: IPv6 addresses on ix3 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] ix1: link state changed to UP [...] lagg0: link state changed to UP [...] ix0: link state changed to UP [...] ix2: link state changed to UP [...] vlan0: changing name to 'lagg0_vlan105' [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ix1: link state changed to DOWN [...] ix1: 2 link states coalesced [...] ix1: link state changed to DOWN [...] ix2: 3 link states coalesced [...] ix2: link state changed to DOWN [...] ix0: 2 link states coalesced [...] ix0: link state changed to UP [...] lagg0: link state changed to DOWN [...] lagg0_vlan105: link state changed to DOWN [...] ix0: link state changed to DOWN [...] lagg0: IPv6 addresses on ix3 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] ix2: link state changed to UP [...] lagg0: link state changed to UP [...] lagg0_vlan105: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 4 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p13-HBSD #0 5a415173060(stable/21.1)-dirty: Fri Feb 5 16:41:22 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 1024x768 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Xeon(R) E-2274G CPU @ 4.00GHz (4008.32-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0x9c002600<MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16290095104 (15535 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL PE_SC3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 2 4 6 5 3 7 [...] Timecounter "TSC-low" frequency 2004161416 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000058 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <DELL PE_SC3> on motherboard [...] acpi0: Power Button (fixed) [...] unknown: memory range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0x7c000000-0x7c3fffff,0x7c404000-0x7c407fff at device 0.0 on pci1 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 4 RX queues 4 TX queues [...] ix0: Using MSI-X interrupts with 5 vectors [...] ix0: allocated for 4 queues [...] ix0: allocated for 4 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0x7bc00000-0x7bffffff,0x7c400000-0x7c403fff at device 0.1 on pci1 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 4 RX queues 4 TX queues [...] ix1: Using MSI-X interrupts with 5 vectors [...] ix1: allocated for 4 queues [...] ix1: allocated for 4 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: netmap queues/slots: TX 4/2048, RX 4/2048 [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0x7d200000-0x7d20ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.4 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x2040-0x2047,0x2048-0x204b,0x2020-0x203f mem 0x7d212000-0x7d213fff,0x7d21d000-0x7d21d0ff,0x7d21c000-0x7d21c7ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] ix2: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0x7cc00000-0x7cffffff,0x7d004000-0x7d007fff at device 0.0 on pci2 [...] ix2: Using 2048 TX descriptors and 2048 RX descriptors [...] ix2: Using 4 RX queues 4 TX queues [...] ix2: Using MSI-X interrupts with 5 vectors [...] ix2: allocated for 4 queues [...] ix2: allocated for 4 rx queues [...] ix2: Ethernet address: ... [...] ix2: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix2: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix3: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0x7c800000-0x7cbfffff,0x7d000000-0x7d003fff at device 0.1 on pci2 [...] ix3: Using 2048 TX descriptors and 2048 RX descriptors [...] ix3: Using 4 RX queues 4 TX queues [...] ix3: Using MSI-X interrupts with 5 vectors [...] ix3: allocated for 4 queues [...] ix3: allocated for 4 rx queues [...] ix3: Ethernet address: ... [...] ix3: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix3: netmap queues/slots: TX 4/2048, RX 4/2048 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <PCI-PCI bridge> at device 0.0 on pci3 [...] pci4: <PCI bus> on pcib4 [...] vgapci0: <VGA-compatible display> mem 0x7a000000-0x7affffff,0x7b808000-0x7b80bfff,0x7b000000-0x7b7fffff at device 0.0 on pci4 [...] vgapci0: Boot video device [...] pcib5: <ACPI PCI-PCI bridge> at device 28.1 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] bge0: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x7d130000-0x7d13ffff,0x7d140000-0x7d14ffff,0x7d150000-0x7d15ffff at device 0.0 on pci5 [...] bge0: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus0: <MII bus> on bge0 [...] brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Using defaults for TSO: 65518/35/2048 [...] bge0: Ethernet address: ... [...] bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x7d100000-0x7d10ffff,0x7d110000-0x7d11ffff,0x7d120000-0x7d12ffff at device 0.1 on pci5 [...] bge1: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus1: <MII bus> on bge1 [...] brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge1: Using defaults for TSO: 65518/35/2048 [...] bge1: Ethernet address: ... [...] pci0: <simple comms> at device 30.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xed800-0xf17ff pnpid ORM0000 on isa0 [...] vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff pnpid PNP0900 on isa0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 271c00002c00 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 272200002c00 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 271d00002c00 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 272500002c00 [...] device_attach: est3 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 272600002c00 [...] device_attach: est4 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 271d00002c00 [...] device_attach: est5 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 271c00002c00 [...] device_attach: est6 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 271d00002c00 [...] device_attach: est7 attach returned 6 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SAMSUNG MZ7KM240HMHQ-00005 GXM5104Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <SAMSUNG MZ7KM240HMHQ-00005 GXM5304Q> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 228936MB (468862128 512 byte sectors) [...] ada1: quirks=0x1<4K> [...] GEOM: ada0: the secondary GPT header is not in the last LBA. [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] GEOM: ada1: the secondary GPT header is not in the last LBA. [...] GEOM_MIRROR: Device mirror/OPNsense launched (2/2). [...] uhub0: 26 ports with 26 removable, self powered [...] ugen0.2: <vendor 0x1604 product 0x10c0> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 1> on usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <vendor 0x1604 product 0x10c0> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] uhub2: 4 ports with 4 removable, self powered [...] lo0: link state changed to UP [...] ugen0.4: <DELLEMC DRAC 5 Virtual Keyboard and Mouse> at usbus0 [...] ukbd0 on uhub1 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] ukbd0: [...] <HID Interface> on usbus0 [...] kbd1 at ukbd0 [...] ugen0.5: <vendor 0x1604 product 0x10c0> at usbus0 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 4> on usbus0 [...] ix0: link state changed to UP [...] lagg0: IPv6 addresses on ix0 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] lagg0: link state changed to UP [...] ix1: link state changed to UP [...] lagg0: IPv6 addresses on ix1 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] ix1: link state changed to DOWN [...] ix0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] ix2: link state changed to UP [...] lagg0: IPv6 addresses on ix2 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] ix2: link state changed to DOWN [...] lagg0: IPv6 addresses on ix3 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] uhub3: 4 ports with 4 removable, self powered [...] ums0 on uhub1 [...] ums0: <HID Interface> on usbus0 [...] ums0: 3 buttons and [Z] coordinates ID=0 [...] vlan0: changing name to 'lagg0_vlan105' [...] bge1: link state changed to DOWN [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] bge1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ix1: link state changed to UP [...] ix0: link state changed to UP [...] ix2: link state changed to UP [...] lagg0: link state changed to UP [...] lagg0_vlan105: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] lagg0: link state changed to DOWN [...] lagg0_vlan105: link state changed to DOWN [...] ix1: link state changed to DOWN [...] ix1: 2 link states coalesced [...] ix1: link state changed to DOWN [...] ix2: 3 link states coalesced [...] ix2: link state changed to DOWN [...] ix0: 2 link states coalesced [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] lagg0: IPv6 addresses on ix3 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] ix2: link state changed to UP [...] lagg0: link state changed to UP [...] lagg0_vlan105: link state changed to UP [...] ix3: link state changed to UP [...] ix3: link state changed to DOWN [...] ugen0.4: <DELLEMC DRAC 5 Virtual Keyboard and Mouse> at usbus0 (disconnected) [...] ums0: at uhub1, port 2, addr 3 (disconnected) [...] ums0: detached [...] ukbd0: at uhub1, port 2, addr 3 (disconnected) [...] ukbd0: detached