[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE releng/13.1-n250148-fc952ac2212 GENERIC amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1920x1080 [...] CPU: Intel(R) Core(TM) i7-8565U CPU @ 1.80GHz (2000.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x806ec Family=0x6 Model=0x8e Stepping=12 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x2b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16295612416 (15540 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM SLIC-MPC> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 3 7 4 5 2 6 [...] Cuse v0.1.36 @ /dev/cuse [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x7ec87000-0x7ec8701e [...] smbios0: Version: 3.0, BCD Revision: 3.0 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-MPC> [...] Firmware Error (ACPI): Failure creating named object [\134_TZ.ETMD], AE_ALREADY_EXISTS (20201113/dswload2-480) [...] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20201113/psobject-372) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x50> port 0x62,0x66,0x68-0x6f iomem 0xfe800000-0xfe80ffff on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0xa2000000-0xa2ffffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa4200000-0xa420ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] xhci_interrupt: host controller halted [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] iwm0: <Intel(R) Dual Band Wireless AC 9560> mem 0xa4218000-0xa421bfff irq 16 at device 20.3 on pci0 [...] sdhci_pci0: <Generic SD HCI> mem 0xa4227000-0xa4227fff irq 19 at device 20.5 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <serial bus> at device 21.1 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel ICH8M+ (RAID) AHCI SATA controller> port 0x4080-0x4087,0x4088-0x408b,0x4060-0x407f mem 0xa4222000-0xa4223fff,0xa422e000-0xa422e0ff,0xa422d000-0xa422d7ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 16 3Gbps ports, Port Multiplier not supported [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci1: <VGA-compatible display> port 0x3000-0x307f mem 0xa3000000-0xa3ffffff,0x90000000-0x9fffffff,0xa0000000-0xa1ffffff irq 16 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 29.4 on pci0 [...] pci2: <ACPI PCI bus> on pcib3 [...] nvme0: <Generic NVMe Device> mem 0xa4100000-0xa4103fff irq 16 at device 0.0 on pci2 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Cannon Lake HDA Controller> mem 0xa421c000-0xa421ffff,0xa4000000-0xa40fffff irq 16 at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_tz0: <Thermal Zone> port 0x100-0x107 on acpi0 [...] acpi_tz1: <Thermal Zone> port 0x100-0x107 on acpi0 [...] acpi_tz2: <Thermal Zone> port 0x100-0x107 on acpi0 [...] acpi_tz2: _CRT value is absurd, ignored (-273.1C) [...] acpi_syscontainer0: <System Container> port 0x100-0x107 on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] Timecounter "TSC" frequency 1992018199 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] acpi_tz2: _CRT value is absurd, ignored (-273.1C) [...] acpi_tz2: _CRT value is absurd, ignored (-273.1C) [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] iwm0: hw rev 0x310, fw ver 34.3125811985.0, address XXX [...] nvd0: <INTEL SSDPEKNW010T8H> NVMe namespace [...] nvd0: 976762MB (2000409264 512 byte sectors) [...] GEOM_ELI: Device nvd0p4.eli created. [...] hdacc0: <Realtek ALC285 HDA CODEC>GEOM_ELI: Encryption: AES-XTS 256 [...] GEOM_ELI: Crypto: accelerated software [...] at cad 0 on hdac0 [...] hdaa0: <Realtek ALC285 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC285 (Analog)> at nid 23 and 25 on hdaa0 [...] pcm1: <Realtek ALC285 (Left Analog Headphones)> at nid 33 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 18 ports with 18 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <DHQYLA19ICO9Y9 HP Wide Vision HD Camera> at usbus0 [...] ugen0.3: <vendor 0x06cb product 0x00c9> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.4: <vendor 0x8087 product 0x0aaa> at usbus0 [...] GEOM_ELI: Device nvd0p3.eli created. [...] GEOM_ELI: Encryption: AES-XTS 128 [...] GEOM_ELI: Crypto: accelerated software [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] [drm] Got stolen memory base 0x89800000, size 0x4000000 [...] drmn0: successfully loaded firmware image 'i915/kbl_dmc_ver1_04.bin' [...] drmn0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized i915 1.6.0 20200917 for drmn0 on minor 0 [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] pbase=0xb0000000 vbase=0xfffff800b0000000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] end FB_INFO [...] nvidia1: <NVIDIA GeForce MX250> on vgapci1 [...] vgapci1: child nvidia1 requested pci_enable_io [...] vgapci1: child nvidia1 requested pci_enable_io [...] pchtherm0: <CannonLake-LP Thermal Subsystem> mem 0xa4225000-0xa4225fff irq 16 at device 18.0 on pci0 [...] ig4iic0: <Intel Cannon Lake-LP I2C Controller-2> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] iicbus0: <unknown card> at addr 0x2c [...] ig4iic1: <Intel Cannon Lake-LP I2C Controller-3> at device 21.1 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] iicbus1: <unknown card> at addr 0x10 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi3: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi3: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQDD: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi4: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi4: Embedded MOF found [...] ACPI: \134_SB.WMID.WQAB: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi5: <ACPI-WMI mapping> on acpi0 [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] wlan0: link state changed to UP [...] iichid0: <SYNA328E:00 06CB:CD50 I2C HID device> at addr 0x2c on iicbus0 [...] iichid0: Interrupt setup failed. Fallback to sampling [...] hidbus0: <HID bus> on iichid0 [...] iichid1: <ELAN2513:00 04F3:23E9 I2C HID device> at addr 0x10 on iicbus1 [...] iichid1: Interrupt setup failed. Fallback to sampling [...] hidbus1: <HID bus> on iichid1 [...] hms0: <SYNA328E:00 06CB:CD50 Mouse> on hidbus0 [...] hms0: 2 buttons and [XY] coordinates ID=2 [...] hmt0: <SYNA328E:00 06CB:CD50 TouchPad> on hidbus0 [...] hconf0: <SYNA328E:00 06CB:CD50 Configuration> on hidbus0 [...] hmt0: Multitouch touchpad with 0 external buttons, click-pad [...] hmt0: 5 contacts with [C] properties. Report range [0:0] - [1272:612] [...] hmt1: <ELAN2513:00 04F3:23E9 TouchScreen> on hidbus1 [...] hmt1: Multitouch touchscreen with 0 external buttons [...] hmt1: 10 contacts with [WH] properties. Report range [0:0] - [2832:1584]