[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p2 stable/22.7-n250239-dde4437e8f2 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU E5-2420 v2 @ 2.20GHz (2200.09-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 68719476736 (65536 MB) [...] avail memory = 66797711360 (63703 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL PE_SC3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 24 CPUs [...] FreeBSD/SMP: 2 package(s) x 6 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic1: MADT APIC ID 1 != hw id 15 [...] ioapic2: MADT APIC ID 2 != hw id 15 [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 32-55 [...] ioapic2 <Version 2.0> irqs 64-87 [...] Launching APs: 1 10 12 19 6 4 15 8 5 17 3 13 21 14 2 16 9 18 23 20 11 7 22 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xfcea0-0xfcebe [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL PE_SC3> [...] acpi0: Power Button (fixed) [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci0: <ACPI PCI bus> numa-domain 0 on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 53 at device 1.0 numa-domain 0 on pci0 [...] pci1: <ACPI PCI bus> numa-domain 0 on pcib1 [...] AVAGO MegaRAID SAS FreeBSD mrsas driver version: XXX.XXX.XXX.XXX-fbsd [...] mfi0: <Dell PERC H710 Mini (monolithics)> port 0xfc00-0xfcff mem 0xdcffc000-0xdcffffff,0xdcf80000-0xdcfbffff irq 34 at device 0.0 numa-domain 0 on pci1 [...] mfi0: Using MSI [...] mfi0: Megaraid SAS driver Ver 4.23 [...] mfi0: FW MaxCmds = 1008, limiting to 128 [...] mfi0: MaxCmd = 1008, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb73c03f0 [...] mfi0: cmd_tbolt 0xfffff800040fb000 has invalid sync_cmd_idx=128 - skipping [...] mfi0: 15363 (718973571s/0x0020/info) - Shutdown command received from host [...] mfi0: 15364 (boot + 4s/0x0020/info) - Firmware initialization started (PCI ID 005b/1000/1f38/1028) [...] mfi0: 15365 (boot + 4s/0x0020/info) - Firmware version 3.131.05-8148 [...] mfi0: 15366 (boot + 5s/0x0008/info) - Battery Present [...] mfi0: 15367 (boot + 5s/0x0020/info) - Package version 21.3.5-0002 [...] mfi0: 15368 (boot + 5s/0x0020/info) - Board Revision A01 [...] mfi0: 15369 (boot + 6s/0x0008/info) - Battery temperature is normal [...] mfi0: 15370 (boot + 6s/0x0008/info) - Current capacity of the battery is above threshold [...] mfi0: 15371 (boot + 20s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored [...] mfi0: 15372 (boot + 20s/0x0002/info) - Inserted: Encl PD 20 [...] mfi0: 15373 (boot + 20s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=5e4ae020ac16pcib2: <ACPI PCI-PCI bridge>1c00,0000000000000000 [...] mfi0: 15374 (boot + 20s/0x0002/info) - Inserted: PD 00(e0x20/s0) [...] mfi0: 15375 (boot + 20s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c5003b36f2a5,0000000000000000 [...] mfi0: 15376 (boot + 20s/0x0002/info) - Inserted: PD 01(e0x20/s1) [...] mfi0: 15377 (boot + 20s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50075f9736d,0000000000000000 [...] mfi0: 15378 (718973627s/0x0020/info) - Time established as 10/13/22 10:53:47; (43 seconds since power on) [...] mfi0: 15379 (718973655s/0x0008/info) - Battery started charging [...] mfi0: 15380 (718973720s/0x0008/info) - Battery charge complete [...] mfi0: 15381 (718973793s/0x0020/info) - Host driver is loaded and operational [...] irq 53 at device 3.0 numa-domain 0 on pci0 [...] pci2: <ACPI PCI bus>mfi0: 15382 (boot + 4s/0x0020/info) - Firmware initialization started (PCI ID 005b/1000/1f38/1028) [...] mfi0: 15383 (boot + 4s/0x0020/info) - Firmware version 3.131.05-8148 [...] mfi0: 15384 (boot + 5s/0x0008/info) - Battery Present [...] mfi0: 15385 (boot + 5s/0x0020/info) - Package version 21.3.5-0002 [...] mfi0: 15386 (boot + 5s/0x0020/info) - Board Revision A01 [...] mfi0: 15387 (boot + 6s/0x0008/info) - Battery temperature is normal [...] mfi0: 15388 (boot + 6s/0x0008/info) - Current capacity of the battery is above threshold [...] mfi0: 15389 (boot + 19s/0x0002/info) - Unexpected sense: Encl PD 20 Path 5e4ae020ac161c00, CDB: 1c 01 00 00 20 00, Sense: 6/29/00 [...] mfi0: 15390 (boot + 21s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored [...] numa-domain 0 on pcib2 [...] mfi0: 15391 (boot + 21s/0x0002/info) - Inserted: Encl PD 20 [...] mfi0: 15392 (boot + 21s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=5e4ae020ac161c00,0000000000000000 [...] mfi0: 15393 (boot + 21s/0x0002/info) - Inserted: PD 00(e0x20/s0) [...] mfi0: 15394 (boot + 21s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c5003b36f2a5,0000000000000000 [...] mfi0: 15395 (boot + 21s/0x0002/info) - Inserted: PD 01(e0x20/s1) [...] mfi0: 15396 (boot + 21s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c50075f9736d,0000000000000000 [...] mfi0: 15397 (boot + 21s/0x0001/info) - Policy change on VD 00/0 to [ID=00,dcp=05,ccp=04,ap=0,dc=0] from [ID=00,dcp=05,ccp=05,ap=0,dc=0] [...] mfi0: 15398 (boot + 43s/0x0020/info) - Cache data recovered successfully [...] mfi0: 15399 (boot + 43s/0x0001/info) - Policy change on VD 00/0 to [ID=00,dcp=05,ccp=05,ap=0,dc=0] from [ID=00,dcp=05,ccp=04,ap=0,dc=0] [...] mfi0: 15400 (719566639s/0x0020/info) - Time established as 10/20/22 7:37:19; (43 seconds since power on) [...] mfi0: 15401 (719566667s/0x0008/info) - Battery started charging [...] mfi0: 15402 (719566751s/0x0020/info) - Host driver is loaded and operational [...] pcib3: <PCI-PCI bridge> irq 16 at device 17.0 numa-domain 0 on pci0 [...] pci3: <PCI bus> numa-domain 0 on pcib3 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] ehci0: <Intel Patsburg USB 2.0 controller> mem 0xdf0fd000-0xdf0fd3ff irq 23 at device 26.0 numa-domain 0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 numa-domain 0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pcib4: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci0 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci0 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] pci0:2:0:0: no valid vpd ident found [...] pci0:2:0:0: failed to read VPD data. [...] bge0: <Broadcom BCM5720 A0, ASIC rev. 0x5720000> mem 0xd90a0000-0xd90affff,0xd90b0000-0xd90bffff,0xd90c0000-0xd90cffff irq 16 at device 0.0 numa-domain 0 on pci5 [...] bge0: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus0: <MII bus> numa-domain 0 on bge0 [...] brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Using defaults for TSO: 65518/35/2048 [...] bge0: Ethernet address: ... [...] bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0xd90d0000-0xd90dffff,0xd90e0000-0xd90effff,0xd90f0000-0xd90fffff irq 17 at device 0.1 numa-domain 0 on pci5 [...] bge1: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus1: <MII bus> numa-domain 0 on bge1 [...] brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge1: Using defaults for TSO: 65518/35/2048 [...] bge1: Ethernet address: ... [...] pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.7 numa-domain 0 on pci0 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib6 [...] pcib7: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci6 [...] pci7: <PCI bus> numa-domain 0 on pcib7 [...] pcib8: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci7 [...] pci8: <PCI bus> numa-domain 0 on pcib8 [...] pcib9: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci8 [...] pci9: <PCI bus> numa-domain 0 on pcib9 [...] vgapci0: <VGA-compatible display> mem 0xd8000000-0xd8ffffff,0xde7fc000-0xde7fffff,0xdd800000-0xddffffff irq 19 at device 0.0 numa-domain 0 on pci9 [...] vgapci0: Boot video device [...] pcib10: <PCI-PCI bridge> at device 1.0 numa-domain 0 on pci7 [...] pci10: <PCI bus> numa-domain 0 on pcib10 [...] ehci1: <Intel Patsburg USB 2.0 controller> mem 0xdf0fe000-0xdf0fe3ff irq 22 at device 29.0 numa-domain 0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib11: <PCI-PCI bridge> at device 30.0 numa-domain 0 on pci0 [...] pci11: <PCI bus> numa-domain 0 on pcib11 [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] ahci0: <Intel Patsburg AHCI SATA controller> port 0xece8-0xecef,0xecf8-0xecfb,0xecf0-0xecf7,0xecfc-0xecff,0xecc0-0xecdf mem 0xdf0ff000-0xdf0ff7ff irq 20 at device 31.2 numa-domain 0 on pci0 [...] ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib12: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 [...] pci12: <ACPI PCI bus> numa-domain 1 on pcib12 [...] pcib13: <ACPI PCI-PCI bridge> irq 85 at device 3.0 numa-domain 1 on pci12 [...] pci13: <ACPI PCI bus> numa-domain 1 on pcib13 [...] pcib14: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 [...] pci14: <ACPI PCI bus> numa-domain 0 on pcib14 [...] pci14: <dasp, performance counters> at device 14.1 (no driver attached) [...] pci14: <dasp, performance counters> at device 19.1 (no driver attached) [...] pci14: <dasp, performance counters> at device 19.5 (no driver attached) [...] pcib15: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 [...] pci15: <ACPI PCI bus> numa-domain 1 on pcib15 [...] pci15: <dasp, performance counters> at device 14.1 (no driver attached) [...] pci15: <dasp, performance counters> at device 19.1 (no driver attached) [...] pci15: <dasp, performance counters> at device 19.5 (no driver attached) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xcc000-0xd37ff,0xec000-0xeffff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1e1a00001900 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1e1a00001900 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1e1a00001900 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1e1a00001900 [...] device_attach: est3 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1e1a00001900 [...] device_attach: est4 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1e1a00001900 [...] device_attach: est5 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1e1a00001900 [...] device_attach: est6 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1e1a00001900 [...] device_attach: est7 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1e1a00001900 [...] device_attach: est8 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1e1a00001900 [...] device_attach: est9 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1e1a00001900 [...] device_attach: est10 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1e1a00001900 [...] device_attach: est11 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1e1a00001900 [...] device_attach: est12 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1e1a00001900 [...] device_attach: est13 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1e1a00001900 [...] device_attach: est14 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1e1a00001900 [...] device_attach: est15 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1e1a00001900 [...] device_attach: est16 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1e1a00001900 [...] device_attach: est17 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1e1a00001900 [...] device_attach: est18 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1e1a00001900 [...] device_attach: est19 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1e1a00001900 [...] device_attach: est20 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1e1a00001900 [...] device_attach: est21 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1e1a00001900 [...] device_attach: est22 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1e1a00001900 [...] device_attach: est23 attach returned 6 [...] Timecounter "TSC-low" frequency 1099999776 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] mfid0 numa-domain 0 on mfi0 [...] mfid0: 285568MB (584843264 sectors) RAID volume 'raid1' is optimal [...] ses0 at ahciem0 bus 0 scbus5 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: pass0,cd0 in 'Slot 04', SATA Slot: scbus4 target 0 [...] cd0 at ahcich4 bus 0 scbus4 target 0 lun 0 [...] cd0: <PLDS DVD+-RW DS-8A9SH ED51> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] WARNING: /mnt was not properly dismounted [...] WARNING: /mnt: mount pending error: blocks 2256 files 16 [...] uhub0 numa-domain 0 on usbus1 [...] uhub1 numa-domain 0 on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub2 numa-domain 0 on uhub1 [...] uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 numa-domain 0 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] uhub2: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen0.3: <no manufacturer Gadget USB HUB> at usbus0 [...] uhub4 numa-domain 0 on uhub2 [...] uhub4: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 3> on usbus0