[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RELEASE-p7 #0: Tue Mar 1 20:47:13 UTC 2022 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] CPU: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz (3093.04-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1d9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3985158144 (3800 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM SLIC-BPC> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 2 3 [...] Timecounter "TSC-low" frequency 1546519216 Hz quality 1000 [...] KTLS: Initialized 4 threads [...] random: entropy device external interface [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd1 at kbdmux0 [...] 000.000183 [4354] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] cryptosoft0: <software crypto> [...] aesni0: No AES or SHA support. [...] acpi0: <HPQOEM SLIC-BPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xfb400000-0xfb7fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel AMT - KT Controller> port 0xf0e0-0xf0e7 mem 0xfbf29000-0xfbf29fff irq 17 at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xfbf00000-0xfbf1ffff,0xfbf28000-0xfbf28fff irq 20 at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xfbf27000-0xfbf273ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Cougar Point HDA Controller> mem 0xfbf20000-0xfbf23fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] bge0: <Broadcom NetXtreme 5720 Dual Port Gigabit NIC, ASIC rev. 0x5720000> mem 0xd0550000-0xd055ffff,0xd0540000-0xd054ffff,0xd0530000-0xd053ffff irq 16 at device 0.0 on pci1 [...] bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus0: <MII bus> on bge0 [...] brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Using defaults for TSO: 65518/35/2048 [...] bge0: Ethernet address: ... [...] bge1: <Broadcom NetXtreme 5720 Dual Port Gigabit NIC, ASIC rev. 0x5720000> mem 0xd0520000-0xd052ffff,0xd0510000-0xd051ffff,0xd0500000-0xd050ffff irq 17 at device 0.1 on pci1 [...] bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus1: <MII bus> on bge1 [...] brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge1: Using defaults for TSO: 65518/35/2048 [...] bge1: Ethernet address: ... [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <PCI-PCI bridge> irq 16 at device 0.0 on pci2 [...] pci3: <PCI bus> on pcib3 [...] pcib4: <PCI-PCI bridge> irq 17 at device 1.0 on pci3 [...] pci4: <PCI bus> on pcib4 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfbb00000-0xfbb00fff,0xd0300000-0xd0303fff irq 17 at device 0.0 on pci4 [...] re0: Using 1 MSI-X message [...] re0: turning off MSI enable bit. [...] re0: Chip rev. 0x2c800000 [...] re0: MAC rev. 0x00100000 [...] miibus2: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus2 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib5: <PCI-PCI bridge> irq 19 at device 3.0 on pci3 [...] pci5: <PCI bus> on pcib5 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem 0xfba00000-0xfba00fff,0xd0200000-0xd0203fff irq 19 at device 0.0 on pci5 [...] re1: Using 1 MSI-X message [...] re1: turning off MSI enable bit. [...] re1: Chip rev. 0x2c800000 [...] re1: MAC rev. 0x00100000 [...] miibus3: <MII bus> on re1 [...] rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus3 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib6: <PCI-PCI bridge> irq 17 at device 5.0 on pci3 [...] pci6: <PCI bus> on pcib6 [...] re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xb000-0xb0ff mem 0xfb900000-0xfb900fff,0xd0100000-0xd0103fff irq 17 at device 0.0 on pci6 [...] re2: Using 1 MSI-X message [...] re2: turning off MSI enable bit. [...] re2: Chip rev. 0x2c800000 [...] re2: MAC rev. 0x00100000 [...] miibus4: <MII bus> on re2 [...] rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus4 [...] rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re2: Using defaults for TSO: 65518/35/2048 [...] re2: Ethernet address: ... [...] re2: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib7: <PCI-PCI bridge> irq 19 at device 7.0 on pci3 [...] pci7: <PCI bus> on pcib7 [...] re3: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xa000-0xa0ff mem 0xfb800000-0xfb800fff,0xd0000000-0xd0003fff irq 19 at device 0.0 on pci7 [...] re3: Using 1 MSI-X message [...] re3: turning off MSI enable bit. [...] re3: Chip rev. 0x2c800000 [...] re3: MAC rev. 0x00100000 [...] miibus5: <MII bus> on re3 [...] rgephy3: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus5 [...] rgephy3: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re3: Using defaults for TSO: 65518/35/2048 [...] re3: Ethernet address: ... [...] re3: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib8: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xfbf26000-0xfbf263ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib10: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] fxp0: <Intel 82558 Pro/100 Ethernet> port 0xe000-0xe01f mem 0xd0400000-0xd0400fff,0xfbd00000-0xfbdfffff irq 20 at device 0.0 on pci10 [...] miibus6: <MII bus> on fxp0 [...] inphy0: <i82555 10/100 media interface> PHY 1 on miibus6 [...] inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow [...] fxp0: Ethernet address: ... [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xfbf25000-0xfbf257ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xce000-0xcefff,0xcf000-0xcf7ff,0xcf800-0xd07ff pnpid ORM0000 on isa0 [...] sc0: <System console> at flags 0x100 on isa0 [...] sc0: VGA <16 virtual consoles, flags=0x300> [...] WARNING: Device "consolectl" is Giant locked and may be deleted before FreeBSD 14.0. [...] vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ipfw2 (+ipv6) initialized, divert enabled, nat loadable, default to accept, logging disabled [...] load_dn_sched dn_sched FIFO loaded [...] load_dn_sched dn_sched FQ_CODEL loaded [...] load_dn_sched dn_sched FQ_PIE loaded [...] load_dn_sched dn_sched PRIO loaded [...] load_dn_sched dn_sched QFQ loaded [...] load_dn_sched dn_sched RR loaded [...] load_dn_sched dn_sched WF2Q+ loaded [...] load_dn_aqm dn_aqm CODEL loaded [...] load_dn_aqm dn_aqm PIE loaded [...] hdacc0: <Realtek ALC662 rev1 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC662 rev1 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC662 rev1 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,25 on hdaa0 [...] pcm1: <Realtek ALC662 rev1 (Onboard Analog Speaker)> at nid 21 on hdaa0 [...] hdacc1: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0 [...] hdaa1: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Cougar Point (HDMI/DP 8ch)> at nid 6 on hdaa1 [...] Trying to mount root from cd9660:/dev/cd0 [ro]... [...] Root mount waiting for: usbus0 usbus1 CAM [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ses0: pass0,cd0 in 'Slot 02', SATA Slot: scbus0 target 0 [...] cd0 at ahcich2 bus 0 scbus0 target 0 lun 0 [...] cd0: <hp DVD D DH16D6SH BHD5> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: 969MB (496197 2048 byte sectors) [...] uhub1: 3 ports with 3 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] bge0: link state changed to UP [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub2: 8 ports with 8 removable, self powered [...] ugen1.3: <ASIX Elec. Corp. AX88x72A> at usbus1 [...] Root mount waiting for: usbus1 [...] ugen1.4: <Kingston DataTraveler 2.00000000310> at usbus1 [...] umass0 on uhub2 [...] umass0: <Kingston DataTraveler 2.00000000310, class 0/0, rev 2.00/2.00, addr 4> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:3:0: Attached to scbus3 [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SCSI-2 device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 477MB (978688 512 byte sectors) [...] da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [...] mountroot: waiting for device /dev/cd0... [...] random: unblocking device. [...] axe0 on uhub2 [...] axe0: <0> on usbus1 [...] miibus7: <MII bus> on axe0 [...] ukphy0: <Generic IEEE 802.3u media interface> PHY 16 on miibus7 [...] ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] ue0: <USB Ethernet> on axe0 [...] ue0: Ethernet address: ... [...] lo0: link state changed to UP [...] bge0: link state changed to DOWN [...] em0: link state changed to UP [...] bge1: link state changed to DOWN [...] re0: link state changed to DOWN [...] re1: link state changed to DOWN [...] re2: link state changed to DOWN [...] re3: link state changed to DOWN [...] fxp0: link state changed to DOWN [...] bge0: link state changed to UP [...] re2: link state changed to UP [...] re3: link state changed to UP [...] ue0: link state changed to DOWN [...] re0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] All buffers synced. [...] ---<<BOOT-PatrioteBSD-64>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p2 PBSD amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] CPU: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz (3093.17-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1d9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3983020032 (3798 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM SLIC-BPC> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 2 3 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] smbios0: <System Management BIOS> at iomem 0xf9bf0-0xf9c0e [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: No AES or SHA support. [...] acpi0: <HPQOEM SLIC-BPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xfb400000-0xfb7fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel AMT - KT Controller> port 0xf0e0-0xf0e7 mem 0xfbf29000-0xfbf29fff irq 17 at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) 82579LM> port 0xf080-0xf09f mem 0xfbf00000-0xfbf1ffff,0xfbf28000-0xfbf28fff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.13-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xfbf27000-0xfbf273ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Cougar Point HDA Controller> mem 0xfbf20000-0xfbf23fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] bge0: <Broadcom NetXtreme 5720 Dual Port Gigabit NIC, ASIC rev. 0x5720000> mem 0xd0550000-0xd055ffff,0xd0540000-0xd054ffff,0xd0530000-0xd053ffff irq 16 at device 0.0 on pci1 [...] bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus0: <MII bus> on bge0 [...] brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Using defaults for TSO: 65518/35/2048 [...] bge0: Ethernet address: ... [...] bge1: <Broadcom NetXtreme 5720 Dual Port Gigabit NIC, ASIC rev. 0x5720000> mem 0xd0520000-0xd052ffff,0xd0510000-0xd051ffff,0xd0500000-0xd050ffff irq 17 at device 0.1 on pci1 [...] bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus1: <MII bus> on bge1 [...] brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge1: Using defaults for TSO: 65518/35/2048 [...] bge1: Ethernet address: ... [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <PCI-PCI bridge> irq 16 at device 0.0 on pci2 [...] pci3: <PCI bus> on pcib3 [...] pcib4: <PCI-PCI bridge> irq 17 at device 1.0 on pci3 [...] pci4: <PCI bus> on pcib4 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfbb00000-0xfbb00fff,0xd0300000-0xd0303fff irq 17 at device 0.0 on pci4 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x2c800000 [...] re0: MAC rev. 0x00100000 [...] miibus2: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus2 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib5: <PCI-PCI bridge> irq 19 at device 3.0 on pci3 [...] pci5: <PCI bus> on pcib5 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem 0xfba00000-0xfba00fff,0xd0200000-0xd0203fff irq 19 at device 0.0 on pci5 [...] re1: Using 1 MSI-X message [...] re1: Chip rev. 0x2c800000 [...] re1: MAC rev. 0x00100000 [...] miibus3: <MII bus> on re1 [...] rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus3 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib6: <PCI-PCI bridge> irq 17 at device 5.0 on pci3 [...] pci6: <PCI bus> on pcib6 [...] re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xb000-0xb0ff mem 0xfb900000-0xfb900fff,0xd0100000-0xd0103fff irq 17 at device 0.0 on pci6 [...] re2: Using 1 MSI-X message [...] re2: Chip rev. 0x2c800000 [...] re2: MAC rev. 0x00100000 [...] miibus4: <MII bus> on re2 [...] rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus4 [...] rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re2: Using defaults for TSO: 65518/35/2048 [...] re2: Ethernet address: ... [...] re2: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib7: <PCI-PCI bridge> irq 19 at device 7.0 on pci3 [...] pci7: <PCI bus> on pcib7 [...] re3: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xa000-0xa0ff mem 0xfb800000-0xfb800fff,0xd0000000-0xd0003fff irq 19 at device 0.0 on pci7 [...] re3: Using 1 MSI-X message [...] re3: Chip rev. 0x2c800000 [...] re3: MAC rev. 0x00100000 [...] miibus5: <MII bus> on re3 [...] rgephy3: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus5 [...] rgephy3: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re3: Using defaults for TSO: 65518/35/2048 [...] re3: Ethernet address: ... [...] re3: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib8: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xfbf26000-0xfbf263ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib10: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] fxp0: <Intel 82558 Pro/100 Ethernet> port 0xe000-0xe01f mem 0xd0400000-0xd0400fff,0xfbd00000-0xfbdfffff irq 20 at device 0.0 on pci10 [...] miibus6: <MII bus> on fxp0 [...] inphy0: <i82555 10/100 media interface> PHY 1 on miibus6 [...] inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow [...] fxp0: Ethernet address: ... [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xfbf25000-0xfbf257ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xce000-0xcefff,0xcf000-0xcf7ff,0xcf800-0xd07ff pnpid ORM0000 on isa0 [...] sc0: <System console> at flags 0x100 on isa0 [...] sc0: VGA <16 virtual consoles, flags=0x300> [...] WARNING: Device "consolectl" is Giant locked and may be deleted before FreeBSD 14.0. [...] vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1546486958 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ipfw2 (+ipv6) initialized, divert enabled, nat loadable, default to accept, logging disabled [...] load_dn_sched dn_sched FQ_PIE loaded [...] load_dn_sched dn_sched PRIO loaded [...] load_dn_sched dn_sched QFQ loaded [...] load_dn_sched dn_sched RR loaded [...] load_dn_sched dn_sched WF2Q+ loaded [...] load_dn_sched dn_sched FIFO loaded [...] load_dn_sched dn_sched FQ_CODEL loaded [...] load_dn_aqm dn_aqm CODEL loaded [...] load_dn_aqm dn_aqm PIE loaded [...] hdacc0: <Realtek ALC662 rev1 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC662 rev1 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC662 rev1 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,25 on hdaa0 [...] pcm1: <Realtek ALC662 rev1 (Onboard Analog Speaker)> at nid 21 on hdaa0 [...] hdacc1: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0 [...] hdaa1: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Cougar Point (HDMI/DP 8ch)> at nid 6 on hdaa1 [...] Trying to mount root from cd9660:/dev/cd0 [ro]... [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: pass0,cd0 in 'Slot 02', SATA Slot: scbus0 target 0 [...] cd0 at ahcich2 bus 0 scbus0 target 0 lun 0 [...] cd0: <hp DVD D DH16D6SH BHD5> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: 1025MB (524806 2048 byte sectors) [...] uhub0: 3 ports with 3 removable, self powered [...] uhub1: 3 ports with 3 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] bge0: link state changed to UP [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub2: 8 ports with 8 removable, self powered [...] ugen1.3: <ASIX Elec. Corp. AX88x72A> at usbus1 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Kingston DataTraveler 2.00000000310 (0x0951:0x1603) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device Kingston DataTraveler 2.00000000310 (0x0951:0x1603) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device Kingston DataTraveler 2.00000000310 (0x0951:0x1603) [...] ugen1.4: <Kingston DataTraveler 2.00000000310> at usbus1 [...] umass0 on uhub2 [...] umass0: <Kingston DataTraveler 2.00000000310, class 0/0, rev 2.00/2.00, addr 4> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:3:0: Attached to scbus3 [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SCSI-2 device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 477MB (978688 512 byte sectors) [...] da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [...] random: unblocking device. [...] axe0 on uhub2 [...] axe0: <0> on usbus1 [...] miibus7: <MII bus> on axe0 [...] ukphy0: <Generic IEEE 802.3u media interface> PHY 16 on miibus7 [...] ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] ue0: <USB Ethernet> on axe0 [...] ue0: Ethernet address: ... [...] lo0: link state changed to UP [...] bge0: link state changed to DOWN [...] em0: link state changed to UP [...] bge1: link state changed to DOWN [...] re0: link state changed to DOWN [...] re1: link state changed to DOWN [...] re2: link state changed to DOWN [...] re3: link state changed to DOWN [...] fxp0: link state changed to DOWN [...] bge0: link state changed to UP [...] re2: link state changed to UP [...] ue0: link state changed to DOWN [...] re0: link state changed to UP [...] re3: link state changed to UP