[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248063-ac40e064d3c SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: AMD FX(tm)-8320 Eight-Core Processor (3511.80-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC> [...] Structured Extended Features=0x8<BMI1> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8181428224 (7802 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796) [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 1 2 6 4 7 5 3 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <PCI-PCI bridge> at device 0.0 on pci1 [...] pci2: <PCI bus> on pcib2 [...] pcib3: <PCI-PCI bridge> at device 2.0 on pci2 [...] pci3: <PCI bus> on pcib3 [...] igb0: <Intel(R) PRO/1000 ET 82576 (Quad Copper)> port 0xd020-0xd03f mem 0xfe820000-0xfe83ffff,0xfe400000-0xfe7fffff,0xfe844000-0xfe847fff irq 26 at device 0.0 on pci3 [...] igb0: EEPROM V1.5-1 eTrack 0x00016169 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 8 RX queues 8 TX queues [...] igb0: Using MSI-X interrupts with 9 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb1: <Intel(R) PRO/1000 ET 82576 (Quad Copper)> port 0xd000-0xd01f mem 0xfe800000-0xfe81ffff,0xfdc00000-0xfdffffff,0xfe840000-0xfe843fff irq 27 at device 0.1 on pci3 [...] igb1: EEPROM V1.5-1 eTrack 0x00016169 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 8 RX queues 8 TX queues [...] igb1: Using MSI-X interrupts with 9 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 8/1024, RX 8/1024 [...] pcib4: <PCI-PCI bridge> at device 4.0 on pci2 [...] pci4: <PCI bus> on pcib4 [...] igb2: <Intel(R) PRO/1000 ET 82576 (Quad Copper)> port 0xc020-0xc03f mem 0xfd420000-0xfd43ffff,0xfd000000-0xfd3fffff,0xfd444000-0xfd447fff irq 24 at device 0.0 on pci4 [...] igb2: EEPROM V1.5-1 eTrack 0x0001616a [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 8 RX queues 8 TX queues [...] igb2: Using MSI-X interrupts with 9 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb3: <Intel(R) PRO/1000 ET 82576 (Quad Copper)> port 0xc000-0xc01f mem 0xfd400000-0xfd41ffff,0xfc800000-0xfcbfffff,0xfd440000-0xfd443fff irq 25 at device 0.1 on pci4 [...] igb3: EEPROM V1.5-1 eTrack 0x0001616a [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 8 RX queues 8 TX queues [...] igb3: Using MSI-X interrupts with 9 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 8/1024, RX 8/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xfc304000-0xfc304fff,0xfc300000-0xfc303fff irq 44 at device 0.0 on pci5 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] pcib6: <ACPI PCI-PCI bridge> irq 52 at device 5.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] xhci0: <ASMedia ASM1042A USB 3.0 controller> mem 0xfea00000-0xfea07fff irq 46 at device 0.0 on pci6 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pcib7: <ACPI PCI-PCI bridge> irq 53 at device 7.0 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] xhci1: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe900000-0xfe907fff irq 50 at device 0.0 on pci7 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf040-0xf047,0xf030-0xf033,0xf020-0xf027,0xf010-0xf013,0xf000-0xf00f mem 0xfeb0b000-0xfeb0b3ff irq 19 at device 17.0 on pci0 [...] ahci0: AHCI v1.20 with 1 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb0a000-0xfeb0afff irq 18 at device 18.0 on pci0 [...] usbus2 on ohci0 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb09000-0xfeb090ff irq 17 at device 18.2 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb08000-0xfeb08fff irq 20 at device 19.0 on pci0 [...] usbus4 on ohci1 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb07000-0xfeb070ff irq 21 at device 19.2 on pci0 [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci1 [...] usbus5: 480Mbps High Speed USB v2.0 [...] hdac0: <ATI SB600 HDA Controller> mem 0xfeb00000-0xfeb03fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib8: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb06000-0xfeb06fff irq 18 at device 20.5 on pci0 [...] usbus6 on ohci2 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb05000-0xfeb05fff irq 22 at device 22.0 on pci0 [...] usbus7 on ohci3 [...] usbus7: 12Mbps Full Speed USB v1.0 [...] ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb04000-0xfeb040ff irq 23 at device 22.2 on pci0 [...] usbus8: EHCI version 1.0 [...] usbus8 on ehci2 [...] usbus8: 480Mbps High Speed USB v2.0 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] Timecounter "TSC-low" frequency 1755855645 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC887 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC887 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm2: <Realtek ALC887 (Rear Digital)> at nid 17 on hdaa0 [...] pcm3: <Realtek ALC887 (Onboard Digital)> at nid 30 on hdaa0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] Root mount waiting for: usbus0 usbus1 CAM usbus2 usbus3 usbus4 usbus5 usbus6 usbus7 usbus8 [...] ugen1.1: <0x1b21 XHCI root HUB> at usbus1 [...] ugen5.1: <ATI EHCI root HUB> at usbus5 [...] uhub0 on usbus1 [...] uhub0: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus5 [...] uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] ugen2.1: <ATI OHCI root HUB> at usbus2 [...] ugen6.1: <ATI OHCI root HUB> at usbus6 [...] ugen0.1: <0x1b21 XHCI root HUB> at usbus0 [...] ugen4.1: <ATI OHCI root HUB> at usbus4 [...] uhub2 on usbus2 [...] uhub3 on usbus4 [...] uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] ugen8.1: <ATI EHCI root HUB> at usbus8 [...] ugen3.1: <ATI EHCI root HUB> at usbus3 [...] ugen7.1: <ATI OHCI root HUB> at usbus7 [...] uhub4 on usbus8 [...] uhub5 on usbus7 [...] uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7 [...] uhub6 on usbus0 [...] uhub6: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub7 on usbus3 [...] uhub7: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub8 on usbus6 [...] uhub8: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 870 EVO 250GB SVT01B6Q> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] uhub8: 2 ports with 2 removable, self powered [...] uhub5: 4 ports with 4 removable, self powered [...] uhub2: 5 ports with 5 removable, self powered [...] uhub3: 5 ports with 5 removable, self powered [...] uhub0: 4 ports with 4 removable, self powered [...] uhub6: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus3 usbus5 usbus8 [...] uhub4: 4 ports with 4 removable, self powered [...] uhub1: 5 ports with 5 removable, self powered [...] uhub7: 5 ports with 5 removable, self powered [...] mountroot: waiting for device /dev/gpt/rootfs...