[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.0-RELEASE #0 releng/14.0-n265380-f9716eee8ab4: Fri Nov 10 05:57:23 UTC 2023 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152) [...] VT(efifb): resolution 1280x1024 [...] CPU: AMD FX(tm)-6300 Six-Core Processor (3516.20-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC> [...] Structured Extended Features=0x8<BMI1> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8075075584 (7700 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20221020/tbfadt-796) [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 1 5 4 3 2 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 450 [...] Event timer "HPET2" frequency 14318180 Hz quality 450 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xc0000000-0xcfffffff,0xfea20000-0xfea3ffff irq 24 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <ATI RV930 HDA Controller> mem 0xfea40000-0xfea43fff irq 25 at device 0.1 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe900000-0xfe900fff irq 44 at device 0.0 on pci2 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pcib3: <ACPI PCI-PCI bridge> irq 53 at device 9.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfe800000-0xfe800fff,0xd0000000-0xd0003fff irq 48 at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x2c800000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf050-0xf05f mem 0xfeb0b000-0xfeb0b3ff irq 19 at device 17.0 on pci0 [...] ahci0: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb0a000-0xfeb0afff irq 18 at device 18.0 on pci0 [...] usbus1 on ohci0 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb09000-0xfeb090ff irq 17 at device 18.2 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb08000-0xfeb08fff irq 18 at device 19.0 on pci0 [...] usbus3 on ohci1 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb07000-0xfeb070ff irq 17 at device 19.2 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci1 [...] usbus4: 480Mbps High Speed USB v2.0 [...] atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 20.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ata1: <ATA channel> at channel 1 on atapci0 [...] hdac1: <ATI SB600 HDA Controller> mem 0xfeb00000-0xfeb03fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb06000-0xfeb06fff irq 18 at device 20.5 on pci0 [...] usbus5 on ohci2 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] pcib5: <ACPI PCI-PCI bridge> at device 21.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] nvme0: <Generic NVMe Device> mem 0xfe700000-0xfe703fff irq 16 at device 0.0 on pci5 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb05000-0xfeb05fff irq 18 at device 22.0 on pci0 [...] usbus6 on ohci3 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb04000-0xfeb040ff irq 17 at device 22.2 on pci0 [...] usbus7: EHCI version 1.0 [...] usbus7 on ehci2 [...] usbus7: 480Mbps High Speed USB v2.0 [...] acpi_button0: <Power Button> on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1758020729 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm2: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm3: <Realtek ALC887 (Onboard Digital)> at nid 17 on hdaa1 [...] ugen3.1: <ATI OHCI root HUB> at usbus3 [...] ugen5.1: <ATI OHCI root HUB> at usbus5 [...] uhub0 on usbus3 [...] ugen4.1: <ATI EHCI root HUB> at usbus4 [...] uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] ugen7.1: <ATI EHCI root HUB> at usbus7 [...] uhub1 on usbus5 [...] ugen0.1: <(0x1106) XHCI root HUB> at usbus0 [...] uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] uhub2 on usbus7 [...] uhub3 on usbus0 [...] uhub3: <(0x1106) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub4 on usbus4 [...] ugen1.1: <ATI OHCI root HUB> at usbus1 [...] uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] uhub5 on usbus1 [...] uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] ugen2.1: <ATI EHCI root HUB> at usbus2 [...] uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 [...] uhub6 on usbus2 [...] uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ugen6.1: <ATI OHCI root HUB> at usbus6 [...] uhub7 on usbus6 [...] uhub7: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] nvme0: Allocated 64MB host memory buffer [...] Trying to mount root from cd9660:/dev/iso9660/LIVE []... [...] uhub1: 2 ports with 2 removable, self powered [...] uhub7: 4 ports with 4 removable, self powered [...] uhub0: 5 ports with 5 removable, self powered [...] uhub5: 5 ports with 5 removable, self powered [...] uhub3: 5 ports with 4 removable, self powered [...] ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0 [...] uhub8 on uhub3 [...] uhub8: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.20, addr 1> on usbus0 [...] Root mount waiting for: usbus0 CAM usbus2 usbus4 usbus7 [...] uhub8: 4 ports with 4 removable, self powered [...] uhub2: 4 ports with 4 removable, self powered [...] uhub4: 5 ports with 5 removable, self powered [...] uhub6: 5 ports with 5 removable, self powered [...] Root mount waiting for: CAM usbus4 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Prolific Technology Inc. USB SD Card Reader (0x067b:0x2731) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device Prolific Technology Inc. USB SD Card Reader (0x067b:0x2731) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device Prolific Technology Inc. USB SD Card Reader (0x067b:0x2731) [...] Root mount waiting for: CAM usbus4 [...] ugen4.2: <Prolific Technology Inc. USB SD Card Reader> at usbus4 [...] umass0 on uhub4 [...] umass0: <Prolific Technology Inc. USB SD Card Reader, class 0/0, rev 2.10/1.00, addr 2> on usbus4 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:7:0: Attached to scbus7 [...] (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim0:0:0:0): SCSI status: Check Condition [...] (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) [...] (probe0:umass-sim0:0:0:0): Error 22, Unretryable error [...] nda0 at nvme0 bus 0 scbus6 target 0 lun 1 [...] nda0: <HP SSD EX900 250GB R0802E0 HBSE28488000012> [...] nda0: Serial Number... [...] nda0: nvme version 1.3 [...] nda0: 238475MB (488397168 512 byte sectors) [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST1000DM003-1CH162 CC49> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 953869MB (1953525168 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] ada1 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada1: <ST1000DM003-1ER162 CC61> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 953869MB (1953525168 512 byte sectors) [...] ada1: quirks=0x1<4K> [...] GEOM_LABEL[1]: MSDOSFS: nda0: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider nda0 is diskid/XXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: Label for provider nda0p1 is gpt/efiboot0. [...] GEOM_LABEL[1]: Label for provider nda0p1 is gptid/HASH_19C-155F-FB1B-C9CE-A2EAEF5CBAEA. [...] GEOM_LABEL[1]: MSDOSFS: nda0p1: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: MSDOSFS: nda0p1: FAT12/16 volume has no name. [...] GEOM_LABEL[1]: Label for provider nda0p2 is gpt/gptboot0. [...] GEOM_LABEL[1]: Label for provider nda0p2 is gptid/HASH_5B7-EF5A-72C5-344D-CA1F51BDF948. [...] GEOM_LABEL[1]: MSDOSFS: nda0p2: no FAT signature found. [...] GEOM_LABEL[1]: Label for provider nda0p3 is gpt/swap0. [...] GEOM_LABEL[1]: Label for provider nda0p3 is gptid/HASH_CD9-D0AE-FB87-0585-937F40AB3075. [...] GEOM_LABEL[1]: MSDOSFS: nda0p3: no FAT signature found. [...] GEOM_LABEL[1]: Label for provider nda0p4 is gpt/zfs0. [...] GEOM_LABEL[1]: Label for provider nda0p4 is gptid/HASH_E75-75E7-62F2-92E9-4FF03B301168. [...] GEOM_LABEL[1]: MSDOSFS: nda0p4: no FAT signature found. [...] da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 [...] da0: < SD Card Reader 1.00> Removable Direct Access SPC-4 SCSI device [...] da0: 40.000MB/s transfers [...] da0: 3781MB (7744512 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] GEOM_LABEL[1]: MSDOSFS: ada1: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada1 is diskid/XXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada0: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada0 is diskid/XXXXXXXXXXXXXX [...] GEOM_LABEL[1]: Label efiboot0(gpt/efiboot0) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_19C-155F-FB1B-C9CE-A2EAEF5CBAEA(gptid/HASH_19C-155F-FB1B-C9CE-A2EAEF5CBAEA) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXX FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXX FAT12/16 volume has no name. [...] GEOM_LABEL[1]: Label gptboot0(gpt/gptboot0) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_5B7-EF5A-72C5-344D-CA1F51BDF948(gptid/HASH_5B7-EF5A-72C5-344D-CA1F51BDF948) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: Label swap0(gpt/swap0) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_CD9-D0AE-FB87-0585-937F40AB3075(gptid/HASH_CD9-D0AE-FB87-0585-937F40AB3075) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: Label zfs0(gpt/zfs0) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_E75-75E7-62F2-92E9-4FF03B301168(gptid/HASH_E75-75E7-62F2-92E9-4FF03B301168) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: MSDOSFS: ada1s1: FAT32 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada1s1 is ntfs/Web. [...] random: unblocking device. [...] GEOM_LABEL[1]: MSDOSFS: ada1s2: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: ada1s3: no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on ada1s3. [...] GEOM_LABEL[1]: MSDOSFS: ada1s4: no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on ada1s4. [...] GEOM_LABEL[1]: MSDOSFS: ada0s1: FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: ada0s2: no FAT volume detected. [...] GEOM_LABEL[1]: ISO9660 file system detected on da0. [...] GEOM_LABEL[1]: Label for provider da0 is iso9660/LIVE. [...] GEOM_LABEL[1]: MSDOSFS: da0: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: ada1s2+00000001: no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on ada1s2+00000001. [...] GEOM_LABEL[1]: MSDOSFS: ada1s2+07801873: FAT32 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada1s2+07801873 is ntfs/Mariadb. [...] GEOM_LABEL[1]: MSDOSFS: ada1s2+14892309: FAT32 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada1s2+14892309 is ntfs/Servers. [...] GEOM_LABEL[1]: MSDOSFS: ada1s2+21982745: FAT32 volume not valid. [...] ugen3.2: <Logitech USB Receiver> at usbus3 [...] ukbd0 on uhub0 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 2> on usbus3 [...] kbd2 at ukbd0 [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label Web(ntfs/Web) already exists (diskid/XXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXX FAT12/16 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on diskid/XXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on diskid/XXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada0s2+00000001: FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: ada0s2+02663221: FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: ada0s2+09321016: FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: ada0s2+19307581: FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXX no FAT volume detected. [...] GEOM_LABEL[1]: Label for provider da0p1 is gptid/HASH_A6C-8A82-B15F-2118-77A70ED453A2. [...] GEOM_LABEL[1]: MSDOSFS: da0p1: no FAT signature found. [...] GEOM_LABEL[1]: Label for provider da0p2 is gptid/HASH_C10-F528-E24E-32D2-F2B3F220F3C0. [...] GEOM_LABEL[1]: MSDOSFS: da0p2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label for provider da0p2 is msdosfs/EFISYS. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on diskid/XXXXXXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label Mariadb(ntfs/Mariadb) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label Servers(ntfs/Servers) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label HASH_A6C-8A82-B15F-2118-77A70ED453A2(gptid/HASH_A6C-8A82-B15F-2118-77A70ED453A2) already exists (iso9660/LIVEp1). [...] GEOM_LABEL[1]: MSDOSFS: iso9660/LIVEp1: no FAT signature found. [...] GEOM_LABEL[1]: Label HASH_C10-F528-E24E-32D2-F2B3F220F3C0(gptid/HASH_C10-F528-E24E-32D2-F2B3F220F3C0) already exists (iso9660/LIVEp2). [...] GEOM_LABEL[1]: MSDOSFS: iso9660/LIVEp2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label EFISYS(msdosfs/EFISYS) already exists (iso9660/LIVEp2). [...] GEOM_LABEL[1]: MSDOSFS: md0: no FAT signature found. [...] GEOM_LABEL[1]: UFS1 file system detected on md0.uzip. [...] GEOM_LABEL[1]: Label for provider md0.uzip is ufsid/XXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: UFS1 file system detected on md0.uzip. [...] GEOM_LABEL[1]: MSDOSFS: md0.uzip: no FAT signature found. [...] Cuse v0.1.37 @ /dev/cuse [...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] [drm] radeon kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] initializing kernel modesetting (TURKS 0x1002:0x6759 0x174B:0xE194 0x00). [...] [drm ERROR :radeon_atombios_init] Unable to find PCI I/O BAR; using MMIO for ATOM IIO [...] ATOM BIOS: TURKS [...] drmn0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [...] drmn0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [...] [drm] Detected VRAM RAM=1024M, BAR=256M [...] [drm] RAM width 128bits DDR [...] [TTM] Zone kernel: Available graphics memory: 4077432 KiB [...] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [...] [TTM] Initializing pool allocator [...] [drm] radeon: 1024M of VRAM memory ready [...] [drm] radeon: 1024M of GTT memory ready. [...] [drm] Loading TURKS Microcode [...] drmn0: successfully loaded firmware image 'radeon/TURKS_pfp.bin' [...] drmn0: successfully loaded firmware image 'radeon/TURKS_me.bin' [...] drmn0: successfully loaded firmware image 'radeon/BTC_rlc.bin' [...] drmn0: successfully loaded firmware image 'radeon/TURKS_mc.bin' [...] drmn0: successfully loaded firmware image 'radeon/TURKS_smc.bin' [...] [drm] Internal thermal controller with fan control [...] [drm] radeon: dpm initialized [...] drmn0: successfully loaded firmware image 'radeon/SUMO_uvd.bin' [...] [drm] GART: num cpu pages 262144, num gpu pages 262144 [...] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [...] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). [...] drmn0: WB enabled [...] drmn0: fence driver on ring 0 use gpu addr 0x0000000040000c00 [...] drmn0: fence driver on ring 3 use gpu addr 0x0000000040000c0c [...] drmn0: fence driver on ring 5 use gpu addr 0x0000000000072118 [...] drmn0: radeon: MSI limited to 32-bit [...] drmn0: radeon: using MSI. [...] [drm] radeon: irq initialized. [...] [drm] ring test on 0 succeeded in 4 usecs [...] [drm] ring test on 3 succeeded in 7 usecs [...] [drm] ring test on 5 succeeded in 3 usecs [...] [drm] UVD initialized successfully. [...] [drm] ib test on ring 0 succeeded in 0 usecs [...] [drm] ib test on ring 3 succeeded in 0 usecs [...] [drm] ib test on ring 5 succeeded [...] lkpi_iicbb0: <LinuxKPI I2CBB> on drmn0 [...] iicbb0: <I2C bit-banging driver> on lkpi_iicbb0 [...] iicbus0: <Philips I2C bus> on iicbb0 addr 0xff [...] iic0: <I2C generic I/O> on iicbus0 [...] lkpi_iicbb1: <LinuxKPI I2CBB> on drmn0 [...] iicbb1: <I2C bit-banging driver> on lkpi_iicbb1 [...] iicbus1: <Philips I2C bus> on iicbb1 addr 0xff [...] iic1: <I2C generic I/O> on iicbus1 [...] lkpi_iicbb2: <LinuxKPI I2CBB> on drmn0 [...] iicbb2: <I2C bit-banging driver> on lkpi_iicbb2 [...] iicbus2: <Philips I2C bus> on iicbb2 addr 0xff [...] iic2: <I2C generic I/O> on iicbus2 [...] lkpi_iicbb3: <LinuxKPI I2CBB> on drmn0 [...] iicbb3: <I2C bit-banging driver> on lkpi_iicbb3 [...] iicbus3: <Philips I2C bus> on iicbb3 addr 0xff [...] iic3: <I2C generic I/O> on iicbus3 [...] lkpi_iicbb4: <LinuxKPI I2CBB> on drmn0 [...] iicbb4: <I2C bit-banging driver> on lkpi_iicbb4 [...] iicbus4: <Philips I2C bus> on iicbb4 addr 0xff [...] iic4: <I2C generic I/O> on iicbus4 [...] lkpi_iicbb5: <LinuxKPI I2CBB> on drmn0 [...] iicbb5: <I2C bit-banging driver> on lkpi_iicbb5 [...] iicbus5: <Philips I2C bus> on iicbb5 addr 0xff [...] iic5: <I2C generic I/O> on iicbus5 [...] lkpi_iicbb6: <LinuxKPI I2CBB> on drmn0 [...] iicbb6: <I2C bit-banging driver> on lkpi_iicbb6 [...] iicbus6: <Philips I2C bus> on iicbb6 addr 0xff [...] iic6: <I2C generic I/O> on iicbus6 [...] lkpi_iicbb7: <LinuxKPI I2CBB> on drmn0 [...] iicbb7: <I2C bit-banging driver> on lkpi_iicbb7 [...] iicbus7: <Philips I2C bus> on iicbb7 addr 0xff [...] iic7: <I2C generic I/O> on iicbus7 [...] [drm] Radeon Display Connectors [...] [drm] Connector 0: [...] [drm] HDMI-A-1 [...] [drm] HPD1 [...] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c [...] [drm] Encoders: [...] [drm] DFP1: INTERNAL_UNIPHY2 [...] [drm] Connector 1: [...] [drm] DVI-D-1 [...] [drm] HPD4 [...] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [...] [drm] Encoders: [...] [drm] DFP2: INTERNAL_UNIPHY [...] [drm] Connector 2: [...] [drm] VGA-1 [...] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [...] [drm] Encoders: [...] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [...] [drm] fb mappable at 0xC0363000 [...] [drm] vram apper at 0xC0000000 [...] [drm] size 8294400 [...] [drm] fb depth is 24 [...] [drm] pitch is 7680 [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] pbase=0xc0363000 vbase=0xfffff800c0363000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] end FB_INFO [...] [drm] Initialized radeon 2.50.0 20080528 for drmn0 on minor 0 [...] re0: link state changed to UP [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] ugen3.2: <Logitech USB Receiver> at usbus3 (disconnected) [...] ukbd0: at uhub0, port 3, addr 2 (disconnected) [...] ukbd0: detached [...] re0: link state changed to UP [...] re0: link state changed to DOWN [...] ugen3.2: <Logitech USB Receiver> at usbus3 [...] ukbd0 on uhub0 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 2> on usbus3 [...] kbd2 at ukbd0 [...] re0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] ums0 on uhub0 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 2> on usbus3 [...] ums0: 16 buttons and [XYZT] coordinates ID=2 [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label ntfs/Web removed. [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label ntfs/Mariadb removed. [...] GEOM_LABEL[1]: Label ntfs/Servers removed. [...] GEOM_LABEL[1]: MSDOSFS: ada1s4: no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on ada1s4. [...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4 [...] GEOM_LABEL[1]: MSDOSFS: ada1s3: no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on ada1s3. [...] GEOM_LABEL[1]: MSDOSFS: ada1s2+00000001: no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on ada1s2+00000001.