[...] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [...] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [...] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved. [...] Copyright (c) 1982, 1986, 1989, 1991, 1993 [...] The Regents of the University of California. All rights reserved. [...] [...] NetBSD 9.1 (GENERIC) #0: Sun Oct 18 19:24:30 UTC 2020 [...] XXX@XXX:/usr/src/sys/arch/amd64/compile/GENERIC [...] total memory = 8094 MB [...] avail memory = 7820 MB [...] cpu_rng: RDSEED [...] rnd: seeded with 256 bits [...] timecounter: Timecounters tick every 10.000 msec [...] Kernelized RAIDframe activated [...] running cgd selftest aes-xts-256 aes-xts-512 done [...] RTC BIOS diagnostic error 0xff<clock_battery,ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time> [...] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 [...] efi: systbl at pa 8ae8ee10 [...] Apple Inc. MacBookPro12,1 (1.0) [...] mainbus0 (root) [...] ACPI: RSDP 0x000000008AD8E014 000024 (v02 APPLE ) [...] ACPI: XSDT 0x000000008AD8E1C0 00009C (v01 APPLE Apple00 00000000 01000013) [...] ACPI: FACP 0x000000008AD8C000 0000F4 (v05 APPLE Apple00 00000000 Loki 0000005F) [...] ACPI: DSDT 0x000000008AD7E000 0089FE (v03 APPLE MacBookP 00010000 INTL 20140424) [...] ACPI: FACS 0x000000008AD06000 000040 [...] ACPI: HPET 0x000000008AD8B000 000038 (v01 APPLE Apple00 00000001 Loki 0000005F) [...] ACPI: APIC 0x000000008AD8A000 0000BC (v02 APPLE Apple00 00000001 Loki 0000005F) [...] ACPI: SBST 0x000000008AD88000 000030 (v01 APPLE Apple00 00000001 Loki 0000005F) [...] ACPI: ECDT 0x000000008AD87000 000053 (v01 APPLE Apple00 00000001 Loki 0000005F) [...] ACPI: SSDT 0x000000008AD7D000 00010B (v01 APPLE SataAhci 00001000 INTL 20140424) [...] ACPI: SSDT 0x000000008AD7C000 000024 (v01 APPLE SmcDppt 00001000 INTL 20140424) [...] ACPI: SSDT 0x000000008AD7B000 000032 (v01 APPLE SsdtS3 00001000 INTL 20140424) [...] ACPI: SSDT 0x000000008AD78000 002B50 (v01 APPLE PcieTbt 00001000 INTL 20140424) [...] ACPI: SSDT 0x000000008AD6B000 0000B8 (v01 APPLE Sdxc 00001000 INTL 20140424) [...] ACPI: SSDT 0x000000008AD6A000 000A74 (v02 APPLE Xhci 00001000 INTL 20140424) [...] ACPI: SSDT 0x000000008AD63000 000618 (v01 PmRef Cpu0Ist 00003000 INTL 20140424) [...] ACPI: SSDT 0x000000008AD62000 000C17 (v01 CpuRef CpuSsdt 00003000 INTL 20140424) [...] ACPI: DMAR 0x000000008AD61000 000088 (v01 APPLE BDW 00000001 INTL 00000001) [...] ACPI: MCFG 0x000000008AD89000 00003C (v01 APPLE Apple00 00000001 Loki 0000005F) [...] ACPI: 9 ACPI AML tables successfully acquired and loaded [...] ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 40 pins [...] x2APIC available but disabled by DMAR table [...] cpu0 at mainbus0 apid 0 [...] cpu0: Intel(R) Core(TM) i5-5257U CPU @ 2.70GHz, id 0x306d4 [...] cpu0: package 0, core 0, smt 0 [...] cpu1 at mainbus0 apid 2 [...] cpu1: Intel(R) Core(TM) i5-5257U CPU @ 2.70GHz, id 0x306d4 [...] cpu1: package 0, core 1, smt 0 [...] cpu2 at mainbus0 apid 1 [...] cpu2: Intel(R) Core(TM) i5-5257U CPU @ 2.70GHz, id 0x306d4 [...] cpu2: package 0, core 0, smt 1 [...] cpu3 at mainbus0 apid 3 [...] cpu3: Intel(R) Core(TM) i5-5257U CPU @ 2.70GHz, id 0x306d4 [...] cpu3: package 0, core 1, smt 1 [...] acpi0 at mainbus0: Intel ACPICA 20190405 [...] acpi0: X/RSDT: OemId <APPLE , Apple00,00000000>, AslId < ,01000013> [...] acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT [...] acpi0: MCFG: segment 0, bus 0-155, address 0x00000000e0000000 [...] ACPI Error: Needed type [Reference], found [Integer] 0xffffc09a7a77e4c0 (20190405/exresop-114) [...] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20190405/dswexec-500) [...] ACPI Error: Aborting method \_PR.CPU0._PDC due to previous error (AE_AML_OPERAND_TYPE) (20190405/psparse-581) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFC09A7A7D7008 00067C (v01 PmRef ApIst 00003000 INTL 20140424) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFC09A7A717388 000119 (v01 PmRef ApCst 00003000 INTL 20140424) [...] acpi0: SCI interrupting at int 9 [...] acpi0: fixed power button present [...] timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 [...] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) [...] timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000 [...] acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0 [...] acpivga0 at acpi0 (IGPU): ACPI Display Adapter [...] acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device [...] acpiout0: brightness levels: [0-100] [...] acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device [...] acpiout2 at acpivga0 (DD03, 0x0200): ACPI Display Output Device [...] acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device [...] acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device [...] acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device [...] acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device [...] acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device [...] acpiout8 at acpivga0 (DD1F, 0x001f): ACPI Display Output Device [...] acpivga0: connected output devices: [...] acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0 [...] FWHD (INT0800) at acpi0 not configured [...] LDRC (PNP0C02) at acpi0 not configured [...] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 [...] SMC (APP0001) at acpi0 not configured [...] ALS0 (ACPI0008) at acpi0 not configured [...] SBS0 (ACPI0002) at acpi0 not configured [...] SPIT (APP000D) at acpi0 not configured [...] PDRC (PNP0C02) at acpi0 not configured [...] MEM2 (PNP0C01) at acpi0 not configured [...] acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery [...] acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter [...] acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch [...] acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button [...] PNLF (APP0002) at acpi0 not configured [...] acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button [...] ACPI: Enabled 4 GPEs in block 00 to 7F [...] pci0 at mainbus0 bus 0: configuration mode 1 [...] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [...] pchb0 at pci0 dev 0 function 0: vendor 8086 product 1604 (rev. 0x09) [...] i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 162b (rev. 0x09) [...] hdaudio0 at pci0 dev 3 function 0: HD Audio Controller [...] hdaudio0: interrupting at msi0 vec 0 [...] hdaudio0: autoconfiguration error: RIRB timeout [...] hdaudio0: autoconfiguration error: RIRB timeout [...] xhci0 at pci0 dev 20 function 0: vendor 8086 product 9cb1 (rev. 0x03) [...] xhci0: interrupting at msi1 vec 0 [...] xhci0: xHCI version 1.0 [...] usb0 at xhci0: USB revision 3.0 [...] usb1 at xhci0: USB revision 2.0 [...] vendor 8086 product 9ce0 (DMA system, EISA, revision 0x03) at pci0 dev 21 function 0 not configured [...] vendor 8086 product 9ce6 (miscellaneous serial bus, revision 0x03) at pci0 dev 21 function 4 not configured [...] vendor 8086 product 9cba (miscellaneous communications, revision 0x03) at pci0 dev 22 function 0 not configured [...] hdaudio1 at pci0 dev 27 function 0: HD Audio Controller [...] hdaudio1: interrupting at msi2 vec 0 [...] hdafg0 at hdaudio1: vendor 1013 product 4208 [...] hdafg0: DAC00 4ch: Speaker [Built-In] [...] hdafg0: DAC01 2ch: HP Out [Jack] [...] hdafg0: DIG02 2ch: SPDIF Out [Jack] [...] hdafg0: ADC03 2ch: Mic In [Jack] [...] hdafg0: 4ch/2ch 48000Hz PCM16* [...] audio0 at hdafg0: playback, capture, full duplex, independent [...] audio0: slinear_le:16 4ch 48000Hz, blk 3840 bytes (10ms) for playback [...] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording [...] spkr0 at audio0: PC Speaker (synthesized) [...] wsbell at spkr0 not configured [...] ppb0 at pci0 dev 28 function 0: vendor 8086 product 9c90 (rev. 0xe3) [...] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s [...] pci1 at ppb0 bus 1 [...] pci1: i/o space, memory space enabled, rd/line, wr/inv ok [...] ppb1 at pci0 dev 28 function 1: vendor 8086 product 9c92 (rev. 0xe3) [...] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s [...] pci2 at ppb1 bus 2 [...] pci2: i/o space, memory space enabled, rd/line, wr/inv ok [...] vendor 14e4 product 1570 (miscellaneous multimedia) at pci2 dev 0 function 0 not configured [...] ppb2 at pci0 dev 28 function 2: vendor 8086 product 9c94 (rev. 0xe3) [...] ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s [...] ppb2: link is x1 @ 2.5GT/s [...] pci3 at ppb2 bus 3 [...] pci3: i/o space, memory space enabled, rd/line, wr/inv ok [...] bwfm0 at pci3 dev 0 function 0: msi3 vec 0 [...] ppb3 at pci0 dev 28 function 4: vendor 8086 product 9c98 (rev. 0xe3) [...] ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s [...] pci4 at ppb3 bus 5 [...] pci4: i/o space, memory space enabled, rd/line, wr/inv ok [...] ppb4 at pci0 dev 28 function 5: vendor 8086 product 9c9a (rev. 0xe3) [...] ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s [...] pci5 at ppb4 bus 4 [...] pci5: i/o space, memory space enabled, rd/line, wr/inv ok [...] nvme0 at pci5 dev 0 function 0: vendor 126f product 2263 (rev. 0x03) [...] nvme0: NVMe 1.3 [...] nvme0: for admin queue interrupting at msix4 vec 0 [...] nvme0: SSD-PM2-512, firmware V1.0, serial ... [...] nvme0: for io queue 1 interrupting at msix4 vec 1 affinity to cpu0 [...] nvme0: for io queue 2 interrupting at msix4 vec 2 affinity to cpu1 [...] nvme0: for io queue 3 interrupting at msix4 vec 3 affinity to cpu2 [...] nvme0: for io queue 4 interrupting at msix4 vec 4 affinity to cpu3 [...] ld0 at nvme0 nsid 1 [...] ld0: 476 GB, 62260 cyl, 255 head, 63 sec, 512 bytes/sect x 1000215216 sectors [...] pcib0 at pci0 dev 31 function 0: vendor 8086 product 9cc3 (rev. 0x03) [...] ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 9ca2 (rev. 0x03) [...] ichsmb0: interrupting at ioapic0 pin 18 [...] iic0 at ichsmb0: I2C bus [...] vendor 8086 product 9ca4 (miscellaneous DASP, revision 0x03) at pci0 dev 31 function 6 not configured [...] isa0 at pcib0 [...] pcppi0 at isa0 port 0x61 [...] spkr1 at pcppi0: PC Speaker [...] wsbell at spkr1 not configured [...] midi0 at pcppi0: PC speaker [...] sysbeep0 at pcppi0 [...] attimer1: attached to pcppi0 [...] acpicpu0 at cpu0: ACPI CPU [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFC09A7AA74808 0004F0 (v01 PmRef Cpu0Cst 00003001 INTL 20140424) [...] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW [...] acpicpu0: C2: FFH, lat 148 us, pow 200 mW [...] acpicpu0: C3: FFH, lat 530 us, pow 200 mW [...] acpicpu0: P0: FFH, lat 10 us, pow 28000 mW, 2701 MHz, turbo boost [...] acpicpu0: P1: FFH, lat 10 us, pow 28000 mW, 2700 MHz [...] acpicpu0: P2: FFH, lat 10 us, pow 26574 mW, 2600 MHz [...] acpicpu0: P3: FFH, lat 10 us, pow 22727 mW, 2300 MHz [...] acpicpu0: P4: FFH, lat 10 us, pow 19103 mW, 2000 MHz [...] acpicpu0: P5: FFH, lat 10 us, pow 16636 mW, 1800 MHz [...] acpicpu0: P6: FFH, lat 10 us, pow 14519 mW, 1600 MHz [...] acpicpu0: P7: FFH, lat 10 us, pow 12247 mW, 1400 MHz [...] acpicpu0: P8: FFH, lat 10 us, pow 10307 mW, 1200 MHz [...] acpicpu0: P9: FFH, lat 10 us, pow 7446 mW, 900 MHz [...] acpicpu0: P10: FFH, lat 10 us, pow 5498 mW, 700 MHz [...] acpicpu0: P11: FFH, lat 10 us, pow 3858 mW, 500 MHz [...] acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 % [...] acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 % [...] acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 % [...] acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 % [...] acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 % [...] acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 % [...] acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 % [...] acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 % [...] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105 [...] acpicpu1 at cpu1: ACPI CPU [...] coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=105 [...] acpicpu2 at cpu2: ACPI CPU [...] acpicpu3 at cpu3: ACPI CPU [...] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [...] timecounter: Timecounter "TSC" frequency 2700164920 Hz quality 3000 [...] uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0 [...] uhub0: 4 ports with 4 removable, self powered [...] uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0 [...] uhub1: 11 ports with 11 removable, self powered [...] acpiacad0: AC adapter online. [...] ld0: GPT GUID: HASH_0A7-2780-979B-FC5B-0642BBEAE596 [...] dk0 at ld0: "EFI System Partition", 409600 blocks at 40, type: msdos [...] dk1 at ld0: "HASH_29E-817B-1ABC-04BE-FB0C1E8AB158", 608918392 blocks at 409640, type: <unknown> [...] dk2 at ld0: "HASH_E2C-FE01-23BF-1C87-5E904F9D2424", 374306816 blocks at 609329152, type: ffs [...] dk3 at ld0: "HASH_C69-F803-0CE6-D4BF-4FF29A159FC9", 16578560 blocks at 983635968, type: swap [...] IPsec: Initialized Security Association Processing. [...] uhidev0 at uhub1 port 1 configuration 1 interface 0 [...] uhidev0: Logitech (0x46d) G413 Silver Mechanical Gaming Keyboard (0xc33a), rev 2.00/14.00, addr 2, iclass 3/1 [...] ukbd0 at uhidev0 [...] umass0 at uhub0 port 3 configuration 1 interface 0 [...] umass0: Apple (0x5ac) Card Reader (0x8406), rev 3.00/8.20, addr 1 [...] umass0: using SCSI over Bulk-Only [...] scsibus0 at umass0: 2 targets, 1 lun per target [...] sd0 at scsibus0 target 0 lun 0: <APPLE, SD Card Reader, 3.00> disk removable [...] sd0: drive offline [...] wskbd0 at ukbd0: console keyboard [...] uhidev1 at uhub1 port 1 configuration 1 interface 1 [...] uhidev1: Logitech (0x46d) G413 Silver Mechanical Gaming Keyboard (0xc33a), rev 2.00/14.00, addr 2, iclass 3/0 [...] uhidev1: 18 report ids [...] ukbd1 at uhidev1 reportid 1 [...] wskbd1 at ukbd1 mux 1 [...] uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 [...] uhid1 at uhidev1 reportid 17: input=19, output=19, feature=0 [...] uhid2 at uhidev1 reportid 18: input=63, output=63, feature=0 [...] uhidev2 at uhub1 port 2 configuration 1 interface 0 [...] uhidev2: Logitech (0x46d) USB Receiver (0xc52f), rev 2.00/30.00, addr 3, iclass 3/1 [...] ums0 at uhidev2: 16 buttons, W and Z dirs [...] wsmouse0 at ums0 mux 0 [...] uhidev3 at uhub1 port 2 configuration 1 interface 1 [...] uhidev3: Logitech (0x46d) USB Receiver (0xc52f), rev 2.00/30.00, addr 3, iclass 3/0 [...] uhidev3: 17 report ids [...] uhid3 at uhidev3 reportid 3: input=4, output=0, feature=0 [...] uhid4 at uhidev3 reportid 16: input=6, output=6, feature=0 [...] uhid5 at uhidev3 reportid 17: input=19, output=19, feature=0 [...] uhidev4 at uhub1 port 3 configuration 1 interface 0 [...] uhidev4: Broadcom Corp. (0x5ac) Bluetooth USB Host Controller (0x8290), rev 2.01/1.69, addr 4, iclass 3/1 [...] uhidev4: 1 report ids [...] ukbd2 at uhidev4 reportid 1 [...] wskbd2 at ukbd2 mux 1 [...] uhidev5 at uhub1 port 3 configuration 1 interface 1 [...] uhidev5: Broadcom Corp. (0x5ac) Bluetooth USB Host Controller (0x8290), rev 2.01/1.69, addr 4, iclass 3/1 [...] uhidev5: 2 report ids [...] ums1 at uhidev5 reportid 2: 3 buttons [...] wsmouse1 at ums1 mux 0 [...] uhidev6 at uhub1 port 5 configuration 1 interface 0 [...] uhidev6: Apple Inc. (0x5ac) Apple Internal Keyboard / Trackpad (0x273), rev 2.00/6.22, addr 5, iclass 3/0 [...] uhidev6: 224 report ids [...] uhid6 at uhidev6 reportid 224: input=4, output=0, feature=0 [...] uhidev7 at uhub1 port 5 configuration 1 interface 1 [...] uhidev7: Apple Inc. (0x5ac) Apple Internal Keyboard / Trackpad (0x273), rev 2.00/6.22, addr 5, iclass 3/1 [...] uhidev7: 63 report ids [...] ukbd3 at uhidev7 reportid 1 [...] wskbd3 at ukbd3 mux 1 [...] uhid7 at uhidev7 reportid 9: input=0, output=0, feature=3 [...] uhid8 at uhidev7 reportid 63: input=64, output=0, feature=0 [...] uhidev8 at uhub1 port 5 configuration 1 interface 2 [...] uhidev8: Apple Inc. (0x5ac) Apple Internal Keyboard / Trackpad (0x273), rev 2.00/6.22, addr 5, iclass 3/1 [...] uhidev8: 68 report ids [...] ums2 at uhidev8 reportid 2: 3 buttons [...] wsmouse2 at ums2 mux 0 [...] uhid9 at uhidev8 reportid 63: input=16, output=0, feature=0 [...] uhid10 at uhidev8 reportid 68: input=991, output=0, feature=0 [...] uhidev9 at uhub1 port 5 configuration 1 interface 3 [...] uhidev9: Apple Inc. (0x5ac) Apple Internal Keyboard / Trackpad (0x273), rev 2.00/6.22, addr 5, iclass 3/0 [...] uhidev9: 83 report ids [...] uhid11 at uhidev9 reportid 63: input=15, output=0, feature=0 [...] uhid12 at uhidev9 reportid 83: input=0, output=63, feature=0 [...] uhidev10 at uhub1 port 5 configuration 1 interface 4 [...] uhidev10: Apple Inc. (0x5ac) Apple Internal Keyboard / Trackpad (0x273), rev 2.00/6.22, addr 5, iclass 3/0 [...] uhidev10: 192 report ids [...] uhid13 at uhidev10 reportid 192: input=107, output=0, feature=0 [...] WARNING: 2 errors while detecting hardware; check system log. [...] boot device: ld0 [...] root on dk2 dumps on dk3 [...] root file system type: ffs [...] kern.module.path=/stand/amd64/9.1/modules [...] kern info: [drm] Memory usable by graphics device = 4096M [...] WARNING: clock gained 3 days [...] kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] kern info: [drm] Driver supports precise vblank timestamp query. [...] kern info: [drm] failed to find VBIOS tables [...] i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0) [...] bwfm0: wl0: Nov 10 2015 06:38:10 version XXX.XXX.XXX.XXX (r598657) FWID 01-ea662a8c [...] bwfm0: address XXX [...] bwfm0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [...] bwfm0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [...] bwfm0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [...] intelfb0 at i915drmkms0 [...] intelfb0: framebuffer at 0xffff8400afd48000, size 2560x1600, depth 32, stride 10240 [...] wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0 [...] wsmux1: connecting to wsdisplay0 [...] wskbd1: connecting to wsdisplay0 [...] wskbd2: connecting to wsdisplay0 [...] wskbd3: connecting to wsdisplay0 [...] wsdisplay0: screen 1 added (default, vt100 emulation) [...] wsdisplay0: screen 2 added (default, vt100 emulation) [...] wsdisplay0: screen 3 added (default, vt100 emulation) [...] wsdisplay0: screen 4 added (default, vt100 emulation)