[...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE GENERIC amd64 [...] FreeBSD clang version 12.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-12.0.1-0-gfed41342a82f) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz (1896.08-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x806ea Family=0x6 Model=0x8e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8081858560 (7707 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM 83B3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 7 2 4 5 6 3 [...] Timecounter "TSC" frequency 1896082380 Hz quality 1000 [...] random: entropy device external interface [...] md0: Preloaded image </data/XXXXXXXXXXXX 16351232 bytes at 0xffffffff82b26640 [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-BPC> [...] acpi0: Power Button (fixed) [...] Firmware Error (ACPI): AE_AML_BUFFER_LIMIT, Field [CAP1] at bit offset/length 64/32 exceeds size of target Buffer (64 bits) (20201113/dsopcode-356) [...] ACPI Error: Aborting method \134_SB._OSC due to previous error (AE_AML_BUFFER_LIMIT) (20201113/psparse-689) [...] acpi0: _OSC failed: AE_AML_BUFFER_LIMIT [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x1ff2000000-0x1ff2ffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem 0xe6320000-0xe632ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms, UART> at device 22.3 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <network> at device 0.0 (no driver attached) [...] pcib2: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <PCI-PCI bridge> at device 0.0 on pci3 [...] pci4: <PCI bus> on pcib4 [...] pcib5: <PCI-PCI bridge> at device 1.0 on pci3 [...] pcib6: <ACPI PCI-PCI bridge> at device 2.0 on pci3 [...] pci5: <ACPI PCI bus> on pcib6 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xe5f00000-0xe5f0ffff at device 0.0 on pci5 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib7: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib7 [...] nvme0: <Generic NVMe Device> mem 0xe6100000-0xe6103fff at device 0.0 on pci6 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Kaby Lake-LP HDA Controller> mem 0x1ff3018000-0x1ff301bfff,0x1ff3000000-0x1ff300ffff at device 31.3 on pci0 [...] em0: <Intel(R) I219-LM SPT(4)> mem 0xe6300000-0xe631ffff at device 31.6 on pci0 [...] em0: EEPROM V0.1-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] acpi_tz2: <Thermal Zone> on acpi0 [...] acpi_tz3: <Thermal Zone> on acpi0 [...] acpi_tz4: <Thermal Zone> on acpi0 [...] acpi_tz5: <Thermal Zone> on acpi0 [...] acpi_tz6: <Thermal Zone> on acpi0 [...] acpi_tz7: <Thermal Zone> on acpi0 [...] acpi_tz8: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0. [...] psm0: model IntelliMouse, device ID 3 [...] acpi_tz9: <Thermal Zone> on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen1.1: <0x8086 XHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] nvd0: <WDC PC SN520 SDAPNUW-256G-1006> NVMe namespace [...] nvd0: 244198MB (500118192 512 byte sectors) [...] hdacc0: <Conexant (0x2008) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Conexant (0x2008) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Conexant (0x2008) (Analog)> at nid 23 and 26 on hdaa0 [...] pcm1: <Conexant (0x2008) (Right Analog Headphones)> at nid 29 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from ufs:/dev/md0 []... [...] uhub1: 4 ports with 4 removable, self powered [...] uhub0: 18 ports with 18 removable, self powered [...] ugen0.2: <HP Inc. HP lt4132 LTE/HSPA+ 4G Module> at usbus0 [...] ugen0.3: <vendor 0x8087 product 0x0a2b> at usbus0 [...] ugen0.4: <vendor 0x138a product 0x00ab> at usbus0 [...] random: unblocking device. [...] ugen0.5: <Quanta HP HD Camera> at usbus0 [...] ugen0.6: <Kingston DataTraveler 3.0> at usbus0 [...] umass0 on uhub0 [...] umass0: <Kingston DataTraveler 3.0, class 0/0, rev 3.20/1.10, addr 5> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc000 [...] umass0:0:0: Attached to scbus0 [...] da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 [...] da0: <Kingston DataTraveler 3.0 PMAP> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: 29568MB (60555264 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] GEOM: ventoy/IMAGE: the secondary GPT table is corrupt or invalid. [...] GEOM: ventoy/IMAGE: using the primary only -- recovery suggested. [...] GEOM: iso9660/GHOSTBSD: the secondary GPT table is corrupt or invalid. [...] GEOM: iso9660/GHOSTBSD: using the primary only -- recovery suggested. [...] Trying to mount root from zfs:livecd []... [...] Cuse v0.1.36 @ /dev/cuse [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMIB.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WMIV.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] pchtherm0: <Skylake PCH Thermal Subsystem> mem 0x1ff3020000-0x1ff3020fff at device 20.2 on pci0 [...] ig4iic0: <Intel Sunrise Point-LP I2C Controller-0> mem 0x1ff301f000-0x1ff301ffff at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Intel Sunrise Point-LP I2C Controller-1> mem 0x1ff301e000-0x1ff301efff at device 21.1 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] iicbus1: <unknown card> at addr 0x2c [...] ichsmb0: <Intel Sunrise Point-LP SMBus controller> port 0xefa0-0xefbf mem 0x1ff301c000-0x1ff301c0ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] iwm0: <Intel(R) Dual Band Wireless AC 8265> mem 0xe6200000-0xe6201fff at device 0.0 on pci1 [...] iwm0: hw rev 0x230, fw ver 22.361476.0, address XXX [...] lo0: link state changed to UP [...] iichid0: <ALP0018:00 044E:121B I2C HID device> at addr 0x2c on iicbus1 [...] iichid0: Interrupt setup failed. Fallback to sampling [...] hidbus0: <HID bus> on iichid0 [...] wlan0: Ethernet address: ... [...] hms0: <ALP0018:00 044E:121B Mouse> on hidbus0 [...] hms0: 2 buttons and [XYWH] coordinates ID=1 [...] hmt0: <ALP0018:00 044E:121B TouchPad> on hidbus0 [...] hconf0: <ALP0018:00 044E:121B Configuration> on hidbus0 [...] hmt0: Multitouch touchpad with 0 external buttons, click-pad [...] hmt0: 5 contacts with [C] properties. Report range [0:0] - [1163:635] [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled