[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p6 stable/24.7-n267939-fd5bc7f34e1 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU microcode: updated from 0x12 to 0x21 [...] CPU: Intel(R) Core(TM) i7-3517UE CPU @ 1.70GHz (2195.07-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3830566912 (3653 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <PTL OEMTABLE> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 2 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf00e0-0xf00fe [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <PTL OEMTABLE> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I211 (Copper)> port 0x6000-0x601f mem 0xe0a00000-0xe0a1ffff,0xe0a20000-0xe0a23fff irq 16 at device 0.0 on pci1 [...] igb0: NVM V0.4 imgtype1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] vgapci0: <VGA-compatible display> port 0x7000-0x703f mem 0xe0000000-0xe03fffff,0xc0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xe0b20000-0xe0b2ffff irq 21 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] atapci0: <Intel ATA controller> port 0x70d0-0x70d7,0x70e4-0x70e7,0x70c8-0x70cf,0x70e0-0x70e3,0x70a0-0x70af irq 18 at device 22.2 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci0 [...] ata3: <ATA channel> at channel 1 on atapci0 [...] uart2: <Intel Panther Point KT Controller> port 0x70c0-0x70c7 mem 0xe0b3c000-0xe0b3cfff irq 19 at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) 82579LM> port 0x7080-0x709f mem 0xe0b00000-0xe0b1ffff,0xe0b3b000-0xe0b3bfff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.15-3 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xe0b3a000-0xe0b3a3ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Panther Point HDA Controller> mem 0xe0b30000-0xe0b33fff irq 22 at device 27.0 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb1: <Intel(R) I211 (Copper)> port 0x5000-0x501f mem 0xe0900000-0xe091ffff,0xe0920000-0xe0923fff irq 16 at device 0.0 on pci3 [...] igb1: NVM V0.4 imgtype1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] ath0: <Qualcomm Atheros AR9565> mem 0xe0800000-0xe087ffff irq 17 at device 0.0 on pci4 [...] ath0: WB335 2-ANT card detected [...] ath0: Bluetooth Antenna Diversity card detected [...] ar9300_flash_map: unimplemented for now [...] Restoring Cal data from DRAM [...] Restoring Cal data from EEPROM [...] Restoring Cal data from Flash [...] Restoring Cal data from Flash [...] Restoring Cal data from OTP [...] ar9300_hw_attach: ar9300_eeprom_attach returned 0 [...] ath0: [HT] enabling HT modes [...] ath0: [HT] enabling short-GI in 20MHz mode [...] ath0: [HT] 1 stream STBC receive enabled [...] ath0: [HT] 1 RX streams; 1 TX streams [...] ath0: QCA9565 mac 704.1 RF5110 phy 2401.9 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] re0: <Realtek PCIe GbE Family Controller> port 0x4000-0x40ff mem 0xe0700000-0xe0700fff,0xe0400000-0xe0403fff irq 16 at device 0.0 on pci5 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.100.00 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] pcib6: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igb2: <Intel(R) I211 (Copper)> port 0x3000-0x301f mem 0xe0600000-0xe061ffff,0xe0620000-0xe0623fff irq 18 at device 0.0 on pci6 [...] igb2: NVM V0.4 imgtype1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] igb3: <Intel(R) I211 (Copper)> port 0x2000-0x201f mem 0xe0500000-0xe051ffff,0xe0520000-0xe0523fff irq 19 at device 0.0 on pci7 [...] igb3: NVM V0.4 imgtype1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xe0b39000-0xe0b393ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Panther Point AHCI SATA controller> port 0x70b8-0x70bf,0x70dc-0x70df,0x70b0-0x70b7,0x70d8-0x70db,0x7060-0x707f mem 0xe0b38000-0xe0b387ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1097506780 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus2 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub2 on usbus0 [...] uhub2: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Realtek ALC888 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC888 (Rear Analog)> at nid 20 and 24 on hdaa0 [...] pcm1: <Realtek ALC888 (Rear Digital)> at nid 30 and 31 on hdaa0 [...] hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0 [...] hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Panther Point (HDMI/DP 8ch)> at nid 6 on hdaa1 [...] pcm3: <Intel Panther Point (HDMI/DP 8ch)> at nid 7 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub2: 8 ports with 8 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] uhub1: 3 ports with 3 removable, self powered [...] Root mount waiting for: CAM usbus1 usbus2 [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub4 on uhub1 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] Root mount waiting for: CAM usbus1 usbus2 [...] ada0 at ahcich4 bus 0 scbus4 target 0 lun 0 [...] ada0: <MSATA 256GB SSD V0718B0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus5 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 04', SATA Slot: scbus4 target 0 [...] uhub4: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen1.3: <vendor 0x0489 product 0xe078> at usbus1 [...] CPU: Intel(R) Core(TM) i7-3517UE CPU @ 1.70GHz (2195.01-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] em0: link state changed to UP [...] ichsmb0: <Intel Panther Point SMBus controller> port 0xefa0-0xefbf mem 0xe0b34000-0xe0b340ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_dock0: <ACPI Docking Station> on acpi0 [...] ubt0 on uhub4 [...] ubt0: <vendor 0x0489 product 0xe078, class 224/1, rev 1.10/0.01, addr 3> on usbus1 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] re0: link state changed to UP [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] wlan0: Ethernet address: ... [...] wlan0: changing name to 'ath0_wlan1' [...] wlan0: Ethernet address: ... [...] wlan0: changing name to 'ath0_wlan1' [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] [...] Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 2h23m23s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p6 stable/24.7-n267939-fd5bc7f34e1 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU microcode: updated from 0x12 to 0x21 [...] CPU: Intel(R) Core(TM) i7-3517UE CPU @ 1.70GHz (2195.10-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3830575104 (3653 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <PTL OEMTABLE> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 2 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf00e0-0xf00fe [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <PTL OEMTABLE> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I211 (Copper)> port 0x6000-0x601f mem 0xe0a00000-0xe0a1ffff,0xe0a20000-0xe0a23fff irq 16 at device 0.0 on pci1 [...] igb0: NVM V0.4 imgtype1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] vgapci0: <VGA-compatible display> port 0x7000-0x703f mem 0xe0000000-0xe03fffff,0xc0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xe0b20000-0xe0b2ffff irq 21 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel Panther Point KT Controller> port 0x70b0-0x70b7 mem 0xe0b3c000-0xe0b3cfff irq 19 at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) 82579LM> port 0x7080-0x709f mem 0xe0b00000-0xe0b1ffff,0xe0b3b000-0xe0b3bfff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.15-3 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xe0b3a000-0xe0b3a3ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Panther Point HDA Controller> mem 0xe0b30000-0xe0b33fff irq 22 at device 27.0 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb1: <Intel(R) I211 (Copper)> port 0x5000-0x501f mem 0xe0900000-0xe091ffff,0xe0920000-0xe0923fff irq 16 at device 0.0 on pci3 [...] igb1: NVM V0.4 imgtype1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] ath0: <Qualcomm Atheros AR9565> mem 0xe0800000-0xe087ffff irq 17 at device 0.0 on pci4 [...] ath0: WB335 2-ANT card detected [...] ath0: Bluetooth Antenna Diversity card detected [...] ar9300_flash_map: unimplemented for now [...] Restoring Cal data from DRAM [...] Restoring Cal data from EEPROM [...] Restoring Cal data from Flash [...] Restoring Cal data from Flash [...] Restoring Cal data from OTP [...] ar9300_hw_attach: ar9300_eeprom_attach returned 0 [...] ath0: [HT] enabling HT modes [...] ath0: [HT] enabling short-GI in 20MHz mode [...] ath0: [HT] 1 stream STBC receive enabled [...] ath0: [HT] 1 RX streams; 1 TX streams [...] ath0: QCA9565 mac 704.1 RF5110 phy 0.0 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] re0: <Realtek PCIe GbE Family Controller> port 0x4000-0x40ff mem 0xe0700000-0xe0700fff,0xe0400000-0xe0403fff irq 16 at device 0.0 on pci5 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.100.00 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] pcib6: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igb2: <Intel(R) I211 (Copper)> port 0x3000-0x301f mem 0xe0600000-0xe061ffff,0xe0620000-0xe0623fff irq 18 at device 0.0 on pci6 [...] igb2: NVM V0.4 imgtype1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] igb3: <Intel(R) I211 (Copper)> port 0x2000-0x201f mem 0xe0500000-0xe051ffff,0xe0520000-0xe0523fff irq 19 at device 0.0 on pci7 [...] igb3: NVM V0.4 imgtype1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xe0b39000-0xe0b393ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Panther Point AHCI SATA controller> port 0x70a8-0x70af,0x70bc-0x70bf,0x70a0-0x70a7,0x70b8-0x70bb,0x7060-0x707f mem 0xe0b38000-0xe0b387ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1097506631 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus2 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub2 on usbus0 [...] uhub2: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Realtek ALC888 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC888 (Rear Analog)> at nid 20 and 24 on hdaa0 [...] pcm1: <Realtek ALC888 (Rear Digital)> at nid 30 and 31 on hdaa0 [...] hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0 [...] hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Panther Point (HDMI/DP 8ch)> at nid 6 on hdaa1 [...] pcm3: <Intel Panther Point (HDMI/DP 8ch)> at nid 7 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ada0 at ahcich4 bus 0 scbus2 target 0 lun 0 [...] ada0: <MSATA 256GB SSD V0718B0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 04', SATA Slot: scbus2 target 0 [...] uhub2: 8 ports with 8 removable, self powered [...] uhub1: 3 ports with 3 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] Root mount waiting for: usbus1 usbus2 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] Root mount waiting for: usbus1 usbus2 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] ugen1.3: <vendor 0x0489 product 0xe078> at usbus1