[...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Kingston DataTraveler 2.0 (0x0951:0x1607) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device Kingston DataTraveler 2.0 (0x0951:0x1607) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device Kingston DataTraveler 2.0 (0x0951:0x1607) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device Kingston DataTraveler 2.0 (0x0951:0x1607) [...] ugen0.7: <Kingston DataTraveler 2.0> at usbus0 [...] umass0 on uhub2 [...] umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.00, addr 6> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x8105 [...] umass0:1:0: Attached to scbus1 [...] da0 at umass-sim0 bus 0 scbus1 target 0 lun 0 [...] da0: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SCSI-2 device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 1909MB (3911616 512 byte sectors) [...] da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re1: link state changed to DOWN [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re1: link state changed to UP [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re1: watchdog timeout [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] wg1: link state changed to DOWN [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 7 0 done [...] All buffers synced. [...] re0: link state changed to UP [...] Uptime: 13h43m40s [...] uhub1: detached [...] ukbd0: detached [...] ums0: detached [...] umass0: detached [...] uhub2: detached [...] uhub3: detached [...] uhub4: detached [...] uhub0: detached [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p7 stable/23.1-n250430-7eb6eb035df SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1680x1050 [...] CPU: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz (1497.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a1 Family=0x6 Model=0x7a Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000000<IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xa<IBRS_ALL,SKIP_L1DFL_VME> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8061079552 (7687 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 2 1 3 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf0000-0xf001e [...] smbios0: Version: 3.1, BCD Revision: 3.1 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 1 vs 1000000010000 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib0: no PRT entry for 0.0.INTA [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Gemini Lake HDA Controller> mem 0xa1310000-0xa1313fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <Intel Gemini Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1314000-0xa1315fff,0xa131e000-0xa131e0ff,0xa131d000-0xa131d7ff at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <RealTek 8168 Gigabit Ethernet> port 0xe000-0xe0ff mem 0xa1204000-0xa1204fff,0xa1200000-0xa1203fff at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib2: <ACPI PCI-PCI bridge> at device 20.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xa1104000-0xa1104fff,0xa1100000-0xa1103fff at device 0.0 on pci2 [...] re1: Using 1 MSI-X message [...] re1: ASPM disabled [...] re1: Chip rev. 0x54000000 [...] re1: MAC rev. 0x00100000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] xhci0: <Intel Gemini Lake USB 3.0 controller> mem 0xa1300000-0xa130ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] sdhci_pci0: <Generic SD HCI> mem 0xa1318000-0xa1318fff,0xa1317000-0xa1317fff irq 39 at device 28.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1497600059 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC225 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC225 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC225 (Analog 2.0+HP)> at nid 20,33 on hdaa0 [...] pcm1: <Realtek ALC225 (Front Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel Gemini Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Gemini Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Gemini Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mmcsd0: 16GB <MMCHC HAG8a4 15.2 SN ... MFG 04/2018 by 144 0x004a> at mmc0 200.0MHz/8bit/8192-block [...] mmcsd0boot0: 4MB partition 1 (read-only) at mmcsd0 [...] mmcsd0boot1: 4MB partition 2 (read-only) at mmcsd0 [...] mmcsd0rpmb: 4MB partition 3 at mmcsd0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <TOSHIBA KSG60ZMV256G M.2 2280 256GB ABDA4105> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 16 ports with 16 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Generic 4-Port USB 2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 1> on usbus0 [...] uhub1: MTT enabled [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 2> on usbus0 [...] kbd1 at ukbd0 [...] Root mount waiting for: usbus0 [...] ugen0.4: <Generic 2-Port USB 2.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <Generic 2-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 3> on usbus0 [...] uhub2: MTT enabled [...] uhub2: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Kingston DataTraveler 2.0 (0x0951:0x1607) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device Kingston DataTraveler 2.0 (0x0951:0x1607) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device Kingston DataTraveler 2.0 (0x0951:0x1607) [...] ugen0.5: <Kingston DataTraveler 2.0> at usbus0 [...] umass0 on uhub2 [...] umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.00, addr 4> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x8104 [...] umass0:1:0: Attached to scbus1 [...] da0 at umass-sim0 bus 0 scbus1 target 0 lun 0 [...] da0: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SCSI-2 device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 1909MB (3911616 512 byte sectors) [...] da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [...] ugen0.6: <Generic 4-Port USB 3.0 Hub> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <Interrupt In Interface> on usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] ugen0.7: <Generic 2-Port USB 3.0 Hub> at usbus0 [...] uhub4 on uhub0 [...] uhub4: <Interrupt In Interface> on usbus0 [...] uhub4: 2 ports with 2 removable, self powered [...] mountroot: waiting for device /dev/gpt/rootfs... [...] Mounting from ufs:/dev/gpt/rootfs failed with error 19. [...] [...] Loader variables: [...] vfs.root.mountfrom=ufs:/dev/gpt/rootfs [...] vfs.root.mountfrom.options=rw [...] [...] Manual root filesystem specification: [...] <fstype>:<device> [options] [...] Mount <device> using filesystem <fstype> [...] and with the specified (optional) option list. [...] [...] eg. ufs:/dev/da0s1a [...] zfs:zroot/ROOT/default [...] cd9660:/dev/cd0 ro [...] (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /) [...] [...] ? List valid disk boot devices [...] . Yield 1 second (for background tasks) [...] <empty line> Abort manual input [...] [...] mountroot> Trying to mount root from ufs:/dev/ada0s3 []... [...] re0: link state changed to UP [...] re1: link state changed to UP [...] ig4iic0: <Intel Gemini Lake I2C Controller-4> mem 0xa131c000-0xa131cfff,0xa131b000-0xa131bfff irq 31 at device 23.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Intel Gemini Lake I2C Controller-7> mem 0xa131a000-0xa131afff,0xa1319000-0xa1319fff irq 34 at device 23.3 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] iicbus1: <unknown card> at addr 0x8 [...] ichsmb0: <Intel Gemini Lake SMBus controller> port 0xf040-0xf05f mem 0xa1316000-0xa13160ff at device 31.1 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] ums0 on uhub0 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 2> on usbus0 [...] ums0: 18 buttons and [XYZT] coordinates ID=2 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] re1: link state changed to DOWN [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re1: link state changed to UP [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] wg1: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 1 0 done [...] All buffers synced. [...] Uptime: 6m55s [...] uhub1: detached [...] ukbd0: detached [...] ums0: detached [...] umass0: detached [...] uhub2: detached [...] uhub3: detached [...] uhub4: detached [...] uhub0: detached [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p5 stable/23.1-n250372-c4ad069e50a SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1680x1050 [...] CPU: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz (1497.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a1 Family=0x6 Model=0x7a Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000000<IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xa<IBRS_ALL,SKIP_L1DFL_VME> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8061079552 (7687 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 2 3 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf0000-0xf001e [...] smbios0: Version: 3.1, BCD Revision: 3.1 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 1 vs 1000000010000 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib0: no PRT entry for 0.0.INTA [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Gemini Lake HDA Controller> mem 0xa1310000-0xa1313fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <Intel Gemini Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1314000-0xa1315fff,0xa131e000-0xa131e0ff,0xa131d000-0xa131d7ff at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <RealTek 8168 Gigabit Ethernet> port 0xe000-0xe0ff mem 0xa1204000-0xa1204fff,0xa1200000-0xa1203fff at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib2: <ACPI PCI-PCI bridge> at device 20.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xa1104000-0xa1104fff,0xa1100000-0xa1103fff at device 0.0 on pci2 [...] re1: Using 1 MSI-X message [...] re1: ASPM disabled [...] re1: Chip rev. 0x54000000 [...] re1: MAC rev. 0x00100000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] xhci0: <Intel Gemini Lake USB 3.0 controller> mem 0xa1300000-0xa130ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] sdhci_pci0: <Generic SD HCI> mem 0xa1318000-0xa1318fff,0xa1317000-0xa1317fff irq 39 at device 28.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1497600072 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC225 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC225 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC225 (Analog 2.0+HP)> at nid 20,33 on hdaa0 [...] pcm1: <Realtek ALC225 (Front Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel Gemini Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Gemini Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Gemini Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mmcsd0: 16GB <MMCHC HAG8a4 15.2 SN ... MFG 04/2018 by 144 0x004a> at mmc0 200.0MHz/8bit/8192-block [...] mmcsd0boot0: 4MB partition 1 (read-only) at mmcsd0 [...] mmcsd0boot1: 4MB partition 2 (read-only) at mmcsd0 [...] mmcsd0rpmb: 4MB partition 3 at mmcsd0 [...] Trying to mount root from ufs:/dev/ufs/OPNsense_Install [ro,noatime]... [...] uhub0: 16 ports with 16 removable, self powered [...] Root mount waiting for: CAM usbus0 [...] ugen0.2: <Generic 4-Port USB 2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 1> on usbus0 [...] uhub1: MTT enabled [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 2> on usbus0 [...] kbd1 at ukbd0 [...] Root mount waiting for: CAM usbus0 [...] ugen0.4: <Generic 2-Port USB 2.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <Generic 2-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 3> on usbus0 [...] uhub2: MTT enabled [...] uhub2: 2 ports with 2 removable, self powered [...] Root mount waiting for: CAM usbus0 [...] Root mount waiting for: CAM usbus0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Kingston DataTraveler 2.0 (0x0951:0x1607) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device Kingston DataTraveler 2.0 (0x0951:0x1607) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device Kingston DataTraveler 2.0 (0x0951:0x1607) [...] ugen0.5: <Kingston DataTraveler 2.0> at usbus0 [...] umass0 on uhub2 [...] umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.00, addr 4> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x8104 [...] umass0:1:0: Attached to scbus1 [...] ugen0.6: <Generic 4-Port USB 3.0 Hub> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <Interrupt In Interface> on usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] Root mount waiting for: CAM usbus0 [...] ugen0.7: <Generic 2-Port USB 3.0 Hub> at usbus0 [...] uhub4 on uhub0 [...] uhub4: <Interrupt In Interface> on usbus0 [...] uhub4: 2 ports with 2 removable, self powered [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <TOSHIBA KSG60ZMV256G M.2 2280 256GB ABDA4105> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] da0 at umass-sim0 bus 0 scbus1 target 0 lun 0 [...] da0: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SCSI-2 device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 1909MB (3911616 512 byte sectors) [...] da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [...] re0: link state changed to DOWN [...] re1: link state changed to DOWN [...] ig4iic0: <Intel Gemini Lake I2C Controller-4> mem 0xa131c000-0xa131cfff,0xa131b000-0xa131bfff irq 31 at device 23.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Intel Gemini Lake I2C Controller-7> mem 0xa131a000-0xa131afff,0xa1319000-0xa1319fff irq 34 at device 23.3 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] iicbus1: <unknown card> at addr 0x8 [...] ichsmb0: <Intel Gemini Lake SMBus controller> port 0xf040-0xf05f mem 0xa1316000-0xa13160ff at device 31.1 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] ums0 on uhub0 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 2> on usbus0 [...] ums0: 18 buttons and [XYZT] coordinates ID=2 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] mmcsd0: Error indicated: 2 Bad CRC [...] mmcsd0: Partition switch error [...] mmcsd0: Partition switch error [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] mmcsd0: Partition switch error [...] mmcsd0: Partition switch error [...] mmcsd0: Partition switch error [...] mmcsd0: Partition switch error [...] mmcsd0: Partition switch error [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 12m42s [...] uhub1: detached [...] ukbd0: detached [...] ums0: detached [...] umass0: detached [...] uhub2: detached [...] uhub3: detached [...] uhub4: detached [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p5 stable/23.1-n250372-c4ad069e50a SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1680x1050 [...] CPU: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz (1497.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a1 Family=0x6 Model=0x7a Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000000<IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xa<IBRS_ALL,SKIP_L1DFL_VME> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8054804480 (7681 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 2 3 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf0000-0xf001e [...] smbios0: Version: 3.1, BCD Revision: 3.1 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 1 vs 1000000010000 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib0: no PRT entry for 0.0.INTA [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Gemini Lake HDA Controller> mem 0xa1310000-0xa1313fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <Intel Gemini Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1314000-0xa1315fff,0xa131e000-0xa131e0ff,0xa131d000-0xa131d7ff at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <RealTek 8168 Gigabit Ethernet> port 0xe000-0xe0ff mem 0xa1204000-0xa1204fff,0xa1200000-0xa1203fff at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib2: <ACPI PCI-PCI bridge> at device 20.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xa1104000-0xa1104fff,0xa1100000-0xa1103fff at device 0.0 on pci2 [...] re1: Using 1 MSI-X message [...] re1: ASPM disabled [...] re1: Chip rev. 0x54000000 [...] re1: MAC rev. 0x00100000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] xhci0: <Intel Gemini Lake USB 3.0 controller> mem 0xa1300000-0xa130ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] sdhci_pci0: <Generic SD HCI> mem 0xa1318000-0xa1318fff,0xa1317000-0xa1317fff irq 39 at device 28.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1497600240 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Realtek ALC225 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC225 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC225 (Analog 2.0+HP)> at nid 20,33 on hdaa0 [...] pcm1: <Realtek ALC225 (Front Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel Gemini Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Gemini Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Gemini Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mmcsd0: 16GB <MMCHC HAG8a4 15.2 SN ... MFG 04/2018 by 144 0x004a> at mmc0 200.0MHz/8bit/8192-block [...] mmcsd0boot0: 4MB partition 1 (read-only) at mmcsd0 [...] mmcsd0boot1: 4MB partition 2 (read-only) at mmcsd0 [...] mmcsd0rpmb: 4MB partition 3 at mmcsd0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <TOSHIBA KSG60ZMV256G M.2 2280 256GB ABDA4105> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 16 ports with 16 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Generic 4-Port USB 2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 1> on usbus0 [...] uhub1: MTT enabled [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 2> on usbus0 [...] kbd1 at ukbd0 [...] Root mount waiting for: usbus0 [...] ugen0.4: <Generic 2-Port USB 2.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <Generic 2-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 3> on usbus0 [...] uhub2: MTT enabled [...] uhub2: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.5: <Generic 4-Port USB 3.0 Hub> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <Interrupt In Interface> on usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] ugen0.6: <Generic 2-Port USB 3.0 Hub> at usbus0 [...] uhub4 on uhub0 [...] uhub4: <Interrupt In Interface> on usbus0 [...] uhub4: 2 ports with 2 removable, self powered [...] re0: link state changed to DOWN [...] re1: link state changed to DOWN [...] ig4iic0: <Intel Gemini Lake I2C Controller-4> mem 0xa131c000-0xa131cfff,0xa131b000-0xa131bfff irq 31 at device 23.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Intel Gemini Lake I2C Controller-7> mem 0xa131a000-0xa131afff,0xa1319000-0xa1319fff irq 34 at device 23.3 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] iicbus1: <unknown card> at addr 0x8 [...] ichsmb0: <Intel Gemini Lake SMBus controller> port 0xf040-0xf05f mem 0xa1316000-0xa13160ff at device 31.1 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] ums0 on uhub0 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 2> on usbus0 [...] ums0: 18 buttons and [XYZT] coordinates ID=2 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: watchdog timeout [...] re1: link state changed to UP [...] re1: link state changed to DOWN [...] re1: watchdog timeout [...] re1: link state changed to UP [...] re1: watchdog timeout [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 4m25s [...] uhub1: detached [...] ukbd0: detached [...] ums0: detached [...] uhub2: detached [...] uhub3: detached [...] uhub4: detached [...] uhub0: detached [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p5 stable/23.1-n250372-c4ad069e50a SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1680x1050 [...] CPU: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz (1497.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a1 Family=0x6 Model=0x7a Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000000<IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xa<IBRS_ALL,SKIP_L1DFL_VME> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8054804480 (7681 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 2 1 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf0000-0xf001e [...] smbios0: Version: 3.1, BCD Revision: 3.1 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 1 vs 1000000010000 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib0: no PRT entry for 0.0.INTA [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Gemini Lake HDA Controller> mem 0xa1310000-0xa1313fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <Intel Gemini Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1314000-0xa1315fff,0xa131e000-0xa131e0ff,0xa131d000-0xa131d7ff at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <RealTek 8168 Gigabit Ethernet> port 0xe000-0xe0ff mem 0xa1204000-0xa1204fff,0xa1200000-0xa1203fff at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib2: <ACPI PCI-PCI bridge> at device 20.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xa1104000-0xa1104fff,0xa1100000-0xa1103fff at device 0.0 on pci2 [...] re1: Using 1 MSI-X message [...] re1: ASPM disabled [...] re1: Chip rev. 0x54000000 [...] re1: MAC rev. 0x00100000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] xhci0: <Intel Gemini Lake USB 3.0 controller> mem 0xa1300000-0xa130ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] sdhci_pci0: <Generic SD HCI> mem 0xa1318000-0xa1318fff,0xa1317000-0xa1317fff irq 39 at device 28.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1497599973 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Realtek ALC225 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC225 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC225 (Analog 2.0+HP)> at nid 20,33 on hdaa0 [...] pcm1: <Realtek ALC225 (Front Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel Gemini Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Gemini Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Gemini Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mmcsd0: 16GB <MMCHC HAG8a4 15.2 SN ... MFG 04/2018 by 144 0x004a> at mmc0 200.0MHz/8bit/8192-block [...] mmcsd0boot0: 4MB partition 1 (read-only) at mmcsd0 [...] mmcsd0boot1: 4MB partition 2 (read-only) at mmcsd0 [...] mmcsd0rpmb: 4MB partition 3 at mmcsd0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <TOSHIBA KSG60ZMV256G M.2 2280 256GB ABDA4105> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 16 ports with 16 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Generic 4-Port USB 2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 1> on usbus0 [...] uhub1: MTT enabled [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 2> on usbus0 [...] kbd1 at ukbd0 [...] Root mount waiting for: usbus0 [...] ugen0.4: <Generic 2-Port USB 2.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <Generic 2-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 3> on usbus0 [...] uhub2: MTT enabled [...] uhub2: 2 ports with 2 removable, self powered [...] ugen0.5: <Generic 4-Port USB 3.0 Hub> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <Interrupt In Interface> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] ugen0.6: <Generic 2-Port USB 3.0 Hub> at usbus0 [...] uhub4 on uhub0 [...] uhub4: <Interrupt In Interface> on usbus0 [...] uhub4: 2 ports with 2 removable, self powered [...] re0: link state changed to DOWN [...] re1: link state changed to UP [...] ig4iic0: <Intel Gemini Lake I2C Controller-4> mem 0xa131c000-0xa131cfff,0xa131b000-0xa131bfff irq 31 at device 23.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Intel Gemini Lake I2C Controller-7> mem 0xa131a000-0xa131afff,0xa1319000-0xa1319fff irq 34 at device 23.3 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] iicbus1: <unknown card> at addr 0x8 [...] ichsmb0: <Intel Gemini Lake SMBus controller> port 0xf040-0xf05f mem 0xa1316000-0xa13160ff at device 31.1 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] ums0 on uhub0 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 2> on usbus0 [...] ums0: 18 buttons and [XYZT] coordinates ID=2 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] re0: link state changed to UP [...] re1: watchdog timeout [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] pid 64850 (sh), jid 0, uid 0: exited on signal 10 (core dumped) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] All buffers synced. [...] Uptime: 5m27s [...] uhub1: detached [...] ukbd0: detached [...] ums0: detached [...] uhub2: detached [...] uhub3: detached [...] uhub4: detached [...] uhub0: detached [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p7 stable/23.1-n250430-7eb6eb035df SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1680x1050 [...] CPU: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz (1497.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a1 Family=0x6 Model=0x7a Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000000<IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xa<IBRS_ALL,SKIP_L1DFL_VME> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8054804480 (7681 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 2 3 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf0000-0xf001e [...] smbios0: Version: 3.1, BCD Revision: 3.1 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 1 vs 1000000010000 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib0: no PRT entry for 0.0.INTA [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Gemini Lake HDA Controller> mem 0xa1310000-0xa1313fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <Intel Gemini Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1314000-0xa1315fff,0xa131e000-0xa131e0ff,0xa131d000-0xa131d7ff at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <RealTek 8168 Gigabit Ethernet> port 0xe000-0xe0ff mem 0xa1204000-0xa1204fff,0xa1200000-0xa1203fff at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib2: <ACPI PCI-PCI bridge> at device 20.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xa1104000-0xa1104fff,0xa1100000-0xa1103fff at device 0.0 on pci2 [...] re1: Using 1 MSI-X message [...] re1: ASPM disabled [...] re1: Chip rev. 0x54000000 [...] re1: MAC rev. 0x00100000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] xhci0: <Intel Gemini Lake USB 3.0 controller> mem 0xa1300000-0xa130ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] sdhci_pci0: <Generic SD HCI> mem 0xa1318000-0xa1318fff,0xa1317000-0xa1317fff irq 39 at device 28.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1497600021 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Realtek ALC225 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC225 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC225 (Analog 2.0+HP)> at nid 20,33 on hdaa0 [...] pcm1: <Realtek ALC225 (Front Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel Gemini Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Gemini Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Gemini Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mmcsd0: 16GB <MMCHC HAG8a4 15.2 SN ... MFG 04/2018 by 144 0x004a> at mmc0 200.0MHz/8bit/8192-block [...] mmcsd0boot0: 4MB partition 1 (read-only) at mmcsd0 [...] mmcsd0boot1: 4MB partition 2 (read-only) at mmcsd0 [...] mmcsd0rpmb: 4MB partition 3 at mmcsd0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <TOSHIBA KSG60ZMV256G M.2 2280 256GB ABDA4105> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 16 ports with 16 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Generic 4-Port USB 2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 1> on usbus0 [...] uhub1: MTT enabled [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 2> on usbus0 [...] kbd1 at ukbd0 [...] Root mount waiting for: usbus0 [...] ugen0.4: <Generic 2-Port USB 2.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <Generic 2-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 3> on usbus0 [...] uhub2: MTT enabled [...] uhub2: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.5: <Generic 4-Port USB 3.0 Hub> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <Interrupt In Interface> on usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] ugen0.6: <Generic 2-Port USB 3.0 Hub> at usbus0 [...] uhub4 on uhub0 [...] uhub4: <Interrupt In Interface> on usbus0 [...] uhub4: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 [...] re0: link state changed to UP [...] re1: link state changed to UP [...] ig4iic0: <Intel Gemini Lake I2C Controller-4> mem 0xa131c000-0xa131cfff,0xa131b000-0xa131bfff irq 31 at device 23.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Intel Gemini Lake I2C Controller-7> mem 0xa131a000-0xa131afff,0xa1319000-0xa1319fff irq 34 at device 23.3 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] iicbus1: <unknown card> at addr 0x8 [...] ichsmb0: <Intel Gemini Lake SMBus controller> port 0xf040-0xf05f mem 0xa1316000-0xa13160ff at device 31.1 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] ums0 on uhub0 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 2> on usbus0 [...] ums0: 18 buttons and [XYZT] coordinates ID=2 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] re1: link state changed to DOWN [...] re0: link state changed to DOWN [...] re1: link state changed to UP [...] re0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re1: watchdog timeout [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] wg0: changing name to 'wg1' [...] wg1: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] ugen0.3: <Logitech USB Receiver> at usbus0 (disconnected) [...] ukbd0: at uhub0, port 3, addr 2 (disconnected) [...] ukbd0: detached [...] ums0: at uhub0, port 3, addr 2 (disconnected) [...] ums0: detached [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] wg1: link state changed to DOWN [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 4h48m10s [...] uhub1: detached [...] uhub2: detached [...] uhub3: detached [...] uhub4: detached [...] uhub0: detached [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p7 stable/23.1-n250430-7eb6eb035df SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1680x1050 [...] CPU: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz (1497.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a1 Family=0x6 Model=0x7a Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000000<IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xa<IBRS_ALL,SKIP_L1DFL_VME> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8052707328 (7679 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 3 1 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf0000-0xf001e [...] smbios0: Version: 3.1, BCD Revision: 3.1 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 1 vs 1000000010000 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib0: no PRT entry for 0.0.INTA [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Gemini Lake HDA Controller> mem 0xa1310000-0xa1313fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <Intel Gemini Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1314000-0xa1315fff,0xa131e000-0xa131e0ff,0xa131d000-0xa131d7ff at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xa1204000-0xa1204fff,0xa1200000-0xa1203fff at device 0.0 on pci1 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.98.00 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] pcib2: <ACPI PCI-PCI bridge> at device 20.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re1: <Realtek PCIe GbE Family Controller> port 0xd000-0xd0ff mem 0xa1104000-0xa1104fff,0xa1100000-0xa1103fff at device 0.0 on pci2 [...] re1: Using Memory Mapping! [...] re1: Using 1 MSI-X message [...] re1: ASPM disabled [...] re1: version:1.98.00 [...] re1: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re1: Ethernet address: ... [...] xhci0: <Intel Gemini Lake USB 3.0 controller> mem 0xa1300000-0xa130ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] sdhci_pci0: <Generic SD HCI> mem 0xa1318000-0xa1318fff,0xa1317000-0xa1317fff irq 39 at device 28.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1497600138 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Realtek ALC225 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC225 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC225 (Analog 2.0+HP)> at nid 20,33 on hdaa0 [...] pcm1: <Realtek ALC225 (Front Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel Gemini Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Gemini Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Gemini Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mmcsd0: 16GB <MMCHC HAG8a4 15.2 SN ... MFG 04/2018 by 144 0x004a> at mmc0 200.0MHz/8bit/8192-block [...] mmcsd0boot0: 4MB partition 1 (read-only) at mmcsd0 [...] mmcsd0boot1: 4MB partition 2 (read-only) at mmcsd0 [...] mmcsd0rpmb: 4MB partition 3 at mmcsd0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <TOSHIBA KSG60ZMV256G M.2 2280 256GB ABDA4105> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 16 ports with 16 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Generic 4-Port USB 2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 1> on usbus0 [...] uhub1: MTT enabled [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 2> on usbus0 [...] kbd1 at ukbd0 [...] Root mount waiting for: usbus0 [...] ugen0.4: <Generic 2-Port USB 2.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <Generic 2-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 3> on usbus0 [...] uhub2: MTT enabled [...] uhub2: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.5: <Generic 4-Port USB 3.0 Hub> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <Interrupt In Interface> on usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] ugen0.6: <Generic 2-Port USB 3.0 Hub> at usbus0 [...] uhub4 on uhub0 [...] uhub4: <Interrupt In Interface> on usbus0 [...] uhub4: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0