[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248088-47fa565344c SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (2000.08-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8146296832 (7768 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <JetWay Em10xcPo> [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20201113/tbfadt-748) [...] ioapic0 <Version 2.0> irqs 0-86 [...] Launching APs: 3 2 1 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] kernel trap 12 with interrupts disabled [...] kernel trap 12 with interrupts disabled [...] aesni0: No AES or SHA support. [...] acpi0: <JetWay Em10xcPo> [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0c16000-0xd0c167ff irq 19 at device 19.0 on pci0 [...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0c00000-0xd0c0ffff irq 20 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] hdac0: <Intel BayTrail HDA Controller> mem 0xd0c10000-0xd0c13fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <PCI-PCI bridge> irq 17 at device 1.0 on pci2 [...] pci3: <PCI bus> on pcib3 [...] igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xd0b00000-0xd0b1ffff,0xd0b20000-0xd0b23fff irq 17 at device 0.0 on pci3 [...] igb0: NVM V0.6 imgtype2 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <PCI-PCI bridge> irq 18 at device 2.0 on pci2 [...] pci4: <PCI bus> on pcib4 [...] pcib5: <PCI-PCI bridge> irq 19 at device 3.0 on pci2 [...] pci5: <PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 16 at device 4.0 on pci2 [...] pci6: <PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] igb1: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0xd0a00000-0xd0a1ffff,0xd0a20000-0xd0a23fff irq 17 at device 0.0 on pci7 [...] igb1: NVM V0.6 imgtype2 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib8: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] pcib9: <ACPI PCI-PCI bridge> at device 0.0 on pci8 [...] pci9: <ACPI PCI bus> on pcib9 [...] pcib10: <PCI-PCI bridge> irq 19 at device 1.0 on pci9 [...] pci10: <PCI bus> on pcib10 [...] igb2: <Intel(R) I211 (Copper)> port 0xc000-0xc01f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff irq 19 at device 0.0 on pci10 [...] igb2: NVM V0.6 imgtype1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib11: <PCI-PCI bridge> irq 16 at device 2.0 on pci9 [...] pci11: <PCI bus> on pcib11 [...] igb3: <Intel(R) I211 (Copper)> port 0xb000-0xb01f mem 0xd0800000-0xd081ffff,0xd0820000-0xd0823fff irq 16 at device 0.0 on pci11 [...] igb3: NVM V0.6 imgtype1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib12: <PCI-PCI bridge> irq 17 at device 3.0 on pci9 [...] pci12: <PCI bus> on pcib12 [...] igb4: <Intel(R) I211 (Copper)> port 0xa000-0xa01f mem 0xd0700000-0xd071ffff,0xd0720000-0xd0723fff irq 17 at device 0.0 on pci12 [...] igb4: NVM V0.6 imgtype1 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 2 RX queues 2 TX queues [...] igb4: Using MSI-X interrupts with 3 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib13: <PCI-PCI bridge> irq 18 at device 4.0 on pci9 [...] pci13: <PCI bus> on pcib13 [...] igb5: <Intel(R) I211 (Copper)> port 0x9000-0x901f mem 0xd0600000-0xd061ffff,0xd0620000-0xd0623fff irq 18 at device 0.0 on pci13 [...] igb5: NVM V0.6 imgtype1 [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 2 RX queues 2 TX queues [...] igb5: Using MSI-X interrupts with 3 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib14: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci14: <ACPI PCI bus> on pcib14 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 2000000978 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC662 rev3 (Analog)> at nid 21 and 24 on hdaa0 [...] pcm1: <Realtek ALC662 rev3 (Rear Analog Headphones)> at nid 20 on hdaa0 [...] pcm2: <Realtek ALC662 rev3 (Rear Digital)> at nid 30 on hdaa0 [...] hdacc1: <Intel Valleyview2 HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Valleyview2 Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Intel Valleyview2 (HDMI/DP 8ch)> at nid 4 on hdaa1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] Root mount waiting for: CAM usbus0 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 850 EVO 120GB EMT01B6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] uhub0: 7 ports with 7 removable, self powered [...] ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/88.32, addr 1> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] mountroot: waiting for device /dev/gpt/rootfs... [...] WARNING: /mnt was not properly dismounted [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] ichsmb0: <Intel Baytrail SMBus controller> port 0xf000-0xf01f mem 0xd0c14000-0xd0c1401f irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] igb1: link state changed to DOWN [...] igb2: link state changed to DOWN [...] igb0: link state changed to DOWN [...] igb1: link state changed to UP [...] arp: XXX is multicast [...] igb2: link state changed to UP [...] igb0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] arp: XXX is multicast [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 5 [...] arp: XXX is multicast [...] 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] All buffers synced. [...] Uptime: 39m57s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248088-47fa565344c SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (2000.08-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8146296832 (7768 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <JetWay Em10xcPo> [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20201113/tbfadt-748) [...] ioapic0 <Version 2.0> irqs 0-86 [...] Launching APs: 2 1 3 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] kernel trap 12 with interrupts disabled [...] kernel trap 12 with interrupts disabled [...] aesni0: No AES or SHA support. [...] acpi0: <JetWay Em10xcPo> [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0c16000-0xd0c167ff irq 19 at device 19.0 on pci0 [...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0c00000-0xd0c0ffff irq 20 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] hdac0: <Intel BayTrail HDA Controller> mem 0xd0c10000-0xd0c13fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <PCI-PCI bridge> irq 17 at device 1.0 on pci2 [...] pci3: <PCI bus> on pcib3 [...] igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xd0b00000-0xd0b1ffff,0xd0b20000-0xd0b23fff irq 17 at device 0.0 on pci3 [...] igb0: NVM V0.6 imgtype2 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <PCI-PCI bridge> irq 18 at device 2.0 on pci2 [...] pci4: <PCI bus> on pcib4 [...] pcib5: <PCI-PCI bridge> irq 19 at device 3.0 on pci2 [...] pci5: <PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 16 at device 4.0 on pci2 [...] pci6: <PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] igb1: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0xd0a00000-0xd0a1ffff,0xd0a20000-0xd0a23fff irq 17 at device 0.0 on pci7 [...] igb1: NVM V0.6 imgtype2 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib8: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] pcib9: <ACPI PCI-PCI bridge> at device 0.0 on pci8 [...] pci9: <ACPI PCI bus> on pcib9 [...] pcib10: <PCI-PCI bridge> irq 19 at device 1.0 on pci9 [...] pci10: <PCI bus> on pcib10 [...] igb2: <Intel(R) I211 (Copper)> port 0xc000-0xc01f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff irq 19 at device 0.0 on pci10 [...] igb2: NVM V0.6 imgtype1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib11: <PCI-PCI bridge> irq 16 at device 2.0 on pci9 [...] pci11: <PCI bus> on pcib11 [...] igb3: <Intel(R) I211 (Copper)> port 0xb000-0xb01f mem 0xd0800000-0xd081ffff,0xd0820000-0xd0823fff irq 16 at device 0.0 on pci11 [...] igb3: NVM V0.6 imgtype1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib12: <PCI-PCI bridge> irq 17 at device 3.0 on pci9 [...] pci12: <PCI bus> on pcib12 [...] igb4: <Intel(R) I211 (Copper)> port 0xa000-0xa01f mem 0xd0700000-0xd071ffff,0xd0720000-0xd0723fff irq 17 at device 0.0 on pci12 [...] igb4: NVM V0.6 imgtype1 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 2 RX queues 2 TX queues [...] igb4: Using MSI-X interrupts with 3 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib13: <PCI-PCI bridge> irq 18 at device 4.0 on pci9 [...] pci13: <PCI bus> on pcib13 [...] igb5: <Intel(R) I211 (Copper)> port 0x9000-0x901f mem 0xd0600000-0xd061ffff,0xd0620000-0xd0623fff irq 18 at device 0.0 on pci13 [...] igb5: NVM V0.6 imgtype1 [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 2 RX queues 2 TX queues [...] igb5: Using MSI-X interrupts with 3 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib14: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci14: <ACPI PCI bus> on pcib14 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 2000001839 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC662 rev3 (Analog)> at nid 21 and 24 on hdaa0 [...] pcm1: <Realtek ALC662 rev3 (Rear Analog Headphones)> at nid 20 on hdaa0 [...] pcm2: <Realtek ALC662 rev3 (Rear Digital)> at nid 30 on hdaa0 [...] hdacc1: <Intel Valleyview2 HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Valleyview2 Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Intel Valleyview2 (HDMI/DP 8ch)> at nid 4 on hdaa1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] Root mount waiting for: CAM usbus0 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 850 EVO 120GB EMT01B6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] uhub0: 7 ports with 7 removable, self powered [...] ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/88.32, addr 1> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] mountroot: waiting for device /dev/gpt/rootfs...