[...] nvidia0: <GeForce 7025 / nForce 630a> on vgapci0 [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: child nvidia0 requested pci_enable_io [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 31m25s [...] umass0: detached [...] uhub0: detached [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device ASolid USB0114 (0x24a9:0x205a) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device ASolid USB0114 (0x24a9:0x205a) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device ASolid USB0114 (0x24a9:0x205a) [...] ugen0.4: <ASolid USB0114> at usbus0 [...] umass0 on uhub1 [...] umass0: <ASolid USB0114, class 0/0, rev 2.10/2.00, addr 4> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:6:0: Attached to scbus6 [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] ukbd0: detached [...] uhid0: detached [...] ums0: detached [...] uhub1: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p2 GENERIC amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: AMD Athlon(tm) II X4 630 Processor (2812.88-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x100f53 Family=0x10 Model=0x5 Stepping=3 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x802009<SSE3,MON,CX16,POPCNT> [...] AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> [...] AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> [...] SVM: NP,NRIP,NAsids=64 [...] TSC: P-state invariant [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3827699712 (3650 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <081612 APIC1631> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 1.1> irqs 0-23 [...] Launching APs: 2 1 3 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xfb4d0-0xfb4ee [...] smbios0: Version: 2.6 [...] aesni0: No AES or SHA support. [...] acpi0: <081612 RSDT1631> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfeff0000-0xfeff0fff on acpi0 [...] Timecounter "HPET" frequency 25000000 Hz quality 950 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <memory, RAM> at device 0.0 (no driver attached) [...] isab0: <PCI-ISA bridge> port 0x4f00-0x4fff at device 1.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory, RAM> at device 1.2 (no driver attached) [...] pci0: <processor> at device 1.3 (no driver attached) [...] ohci0: <nVidia nForce MCP61 USB Controller> mem 0xdfffb000-0xdfffbfff irq 22 at device 2.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ehci0: <NVIDIA nForce MCP61 USB 2.0 controller> mem 0xdfffac00-0xdfffacff irq 23 at device 2.1 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] hdac0: <NVIDIA MCP61 HDA Controller> mem 0xdfff4000-0xdfff7fff irq 20 at device 5.0 on pci0 [...] atapci0: <nVidia nForce MCP61 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 6.0 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ata1: <ATA channel> at channel 1 on atapci0 [...] atapci1: <nVidia nForce MCP61 SATA300 controller> port 0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc80f mem 0xdfff9000-0xdfff9fff irq 21 at device 8.0 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci1 [...] ata3: <ATA channel> at channel 1 on atapci1 [...] atapci2: <nVidia nForce MCP61 SATA300 controller> port 0xc480-0xc487,0xc400-0xc403,0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc0f mem 0xdfff8000-0xdfff8fff irq 22 at device 8.1 on pci0 [...] ata4: <ATA channel> at channel 0 on atapci2 [...] ata5: <ATA channel> at channel 1 on atapci2 [...] pcib2: <ACPI PCI-PCI bridge> at device 9.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] re0: <Realtek PCIe FE Family Controller> port 0xe800-0xe8ff mem 0xdcfff000-0xdcffffff,0xdcff8000-0xdcffbfff irq 16 at device 0.0 on pci4 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: version:1.97.00 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] vgapci0: <VGA-compatible display> mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff,0xdd000000-0xddffffff irq 23 at device 13.0 on pci0 [...] vgapci0: Boot video device [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1406396036 Hz quality 800 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <nVidia OHCI root HUB> at usbus0 [...] ugen1.1: <nVidia EHCI root HUB> at usbus1 [...] uhub0 on usbus1 [...] uhub1 on usbus0 [...] uhub0: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] hdacc0: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC662 rev3 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,25,26 on hdaa0 [...] pcm1: <Realtek ALC662 rev3 (Rear Digital)> at nid 30 on hdaa0 [...] Trying to mount root from zfs:fbsd/ROOT/default []... [...] uhub1: 10 ports with 10 removable, self powered [...] Root mount waiting for: usbus1 CAM [...] Root mount waiting for: usbus1 CAM [...] ada0 at ata2 bus 0 scbus2 target 0 lun 0 [...] ada0: <WDC WD5000LPCX-24C6HT0 02.01A02> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada0: 476940MB (976773168 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] Root mount waiting for: usbus1 [...] uhub0: 10 ports with 10 removable, self powered [...] Root mount waiting for: usbus1 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device ASolid USB0114 (0x24a9:0x205a) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device ASolid USB0114 (0x24a9:0x205a) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device ASolid USB0114 (0x24a9:0x205a) [...] ugen1.2: <ASolid USB0114> at usbus1 [...] umass0 on uhub0 [...] umass0: <ASolid USB0114, class 0/0, rev 2.10/2.00, addr 2> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:6:0: Attached to scbus6 [...] da0 at umass-sim0 bus 0 scbus6 target 0 lun 0 [...] da0: <ASolid USB 0000> Removable Direct Access SPC-2 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 30000MB (61440001 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] Root mount waiting for: usbus1 [...] ugen0.2: <vendor 0x04d9 USB Keyboard> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/3.10, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.3: <vendor 0x1bcf USB Optical Mouse> at usbus0 [...] atrtc0: WARNING: Battery failure indication [...] Warning: bad time from time-of-day clock, system time will not be set accurately [...] lo0: link state changed to UP [...] re0: link state changed to UP [...] uhid0 on uhub1 [...] uhid0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/3.10, addr 2> on usbus0 [...] ums0 on uhub1 [...] ums0: <vendor 0x1bcf USB Optical Mouse, class 0/0, rev 2.00/0.14, addr 3> on usbus0 [...] ums0: 3 buttons and [XYZT] coordinates ID=1