[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248071-cafeb6ce414 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU E5-2407 0 @ 2.20GHz (2200.10-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206d7 Family=0x6 Model=0x2d Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 12884901888 (12288 MB) [...] avail memory = 12406652928 (11831 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL PE_SC3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic1: MADT APIC ID 1 != hw id 15 [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 32-55 [...] Launching APs: 3 2 1 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL PE_SC3> [...] acpi0: Power Button (fixed) [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci0: <ACPI PCI bus> numa-domain 0 on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 53 at device 1.0 numa-domain 0 on pci0 [...] pci1: <ACPI PCI bus> numa-domain 0 on pcib1 [...] mfi0: <Drake Skinny> port 0xfc00-0xfcff mem 0xd8ffc000-0xd8ffffff,0xd8f80000-0xd8fbffff irq 34 at device 0.0 numa-domain 0 on pci1 [...] mfi0: Using MSI [...] mfi0: Megaraid SAS driver Ver 4.23 [...] mfi0: 5265 (702746644s/0x0020/info) - Shutdown command received from host [...] mfi0: 5266 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0073/1000/1f51/1028) [...] mfi0: 5267 (boot + 3s/0x0020/info) - Firmware version 2.121.14-6325 [...] mfi0: 5268 (boot + 6s/0x0020/info) - Package version 20.13.3-0001 [...] mfi0: 5269 (boot + 6s/0x0020/info) - Board Revision A06 [...] mfi0: 5270 (boot + 32s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored [...] mfi0: 5271 (boot + 32s/0x0002/info) - Inserted: Encl PD 20 [...] mfi0: 5272 (boot + 32s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=5d81f060cd607pcib2: <ACPI PCI-PCI bridge>400,0000000000000000 [...] mfi0: 5273 (boot + 32s/0x0002/info) - Inserted: PD 00(e0x20/s0) [...] mfi0: 5274 (boot + 32s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=44332211040000 irq 53 at device 3.0 numa-domain 0 on pci0 [...] pci2: <ACPI PCI bus>00,0000000000000000 [...] mfi0: 5275 (boot + 32s/0x0002/WARN) - PD 00(e0x20/s0) is not a certified drive [...] mfi0: 5276 (702746750s/0x0020/info) - Time established as 04/08/22 15:25:50; (44 seconds since power on) [...] mfi0: 5277 (702746899s/0x0020/info) - Host driver is loaded and operational [...] numa-domain 0 on pcib2 [...] pcib3: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci2 [...] pci3: <PCI bus> numa-domain 0 on pcib3 [...] pcib4: <PCI-PCI bridge> at device 2.0 numa-domain 0 on pci3 [...] pci4: <PCI bus> numa-domain 0 on pcib4 [...] igb0: <Intel(R) PRO/1000 ET 82576 (Quad Copper)> port 0xecc0-0xecdf mem 0xdbba0000-0xdbbbffff,0xdb000000-0xdb3fffff,0xdbbf8000-0xdbbfbfff irq 53 at device 0.0 numa-domain 0 on pci4 [...] igb0: EEPROM V1.5-1 eTrack 0x00011d40 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) PRO/1000 ET 82576 (Quad Copper)> port 0xece0-0xecff mem 0xdbbc0000-0xdbbdffff,0xdb400000-0xdb7fffff,0xdbbfc000-0xdbbfffff irq 54 at device 0.1 numa-domain 0 on pci4 [...] igb1: EEPROM V1.5-1 eTrack 0x00011d40 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <PCI-PCI bridge> at device 4.0 numa-domain 0 on pci3 [...] pci5: <PCI bus> numa-domain 0 on pcib5 [...] igb2: <Intel(R) PRO/1000 ET 82576 (Quad Copper)> port 0xdcc0-0xdcdf mem 0xdc7a0000-0xdc7bffff,0xdbc00000-0xdbffffff,0xdc7f8000-0xdc7fbfff irq 48 at device 0.0 numa-domain 0 on pci5 [...] igb2: EEPROM V1.5-1 eTrack 0x00011d42 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) PRO/1000 ET 82576 (Quad Copper)> port 0xdce0-0xdcff mem 0xdc7c0000-0xdc7dffff,0xdc000000-0xdc3fffff,0xdc7fc000-0xdc7fffff irq 52 at device 0.1 numa-domain 0 on pci5 [...] igb3: EEPROM V1.5-1 eTrack 0x00011d42 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib6: <PCI-PCI bridge> irq 16 at device 17.0 numa-domain 0 on pci0 [...] pci6: <PCI bus> numa-domain 0 on pcib6 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] ehci0: <Intel Patsburg USB 2.0 controller> mem 0xdc8fd000-0xdc8fd3ff irq 23 at device 26.0 numa-domain 0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 numa-domain 0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pcib7: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci0 [...] pci7: <ACPI PCI bus> numa-domain 0 on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci0 [...] pci8: <ACPI PCI bus> numa-domain 0 on pcib8 [...] bge0: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0xd50a0000-0xd50affff,0xd50b0000-0xd50bffff,0xd50c0000-0xd50cffff irq 16 at device 0.0 numa-domain 0 on pci8 [...] bge0: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus0: <MII bus> numa-domain 0 on bge0 [...] brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Using defaults for TSO: 65518/35/2048 [...] bge0: Ethernet address: ... [...] bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0xd50d0000-0xd50dffff,0xd50e0000-0xd50effff,0xd50f0000-0xd50fffff irq 17 at device 0.1 numa-domain 0 on pci8 [...] bge1: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus1: <MII bus> numa-domain 0 on bge1 [...] brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge1: Using defaults for TSO: 65518/35/2048 [...] bge1: Ethernet address: ... [...] pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.7 numa-domain 0 on pci0 [...] pci9: <ACPI PCI bus> numa-domain 0 on pcib9 [...] pcib10: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci9 [...] pci10: <PCI bus> numa-domain 0 on pcib10 [...] pcib11: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci10 [...] pci11: <PCI bus> numa-domain 0 on pcib11 [...] pcib12: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci11 [...] pci12: <PCI bus> numa-domain 0 on pcib12 [...] vgapci0: <VGA-compatible display> mem 0xd4000000-0xd4ffffff,0xda7fc000-0xda7fffff,0xd9800000-0xd9ffffff irq 19 at device 0.0 numa-domain 0 on pci12 [...] vgapci0: Boot video device [...] pcib13: <PCI-PCI bridge> at device 1.0 numa-domain 0 on pci10 [...] pci13: <PCI bus> numa-domain 0 on pcib13 [...] ehci1: <Intel Patsburg USB 2.0 controller> mem 0xdc8fe000-0xdc8fe3ff irq 22 at device 29.0 numa-domain 0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib14: <PCI-PCI bridge> at device 30.0 numa-domain 0 on pci0 [...] pci14: <PCI bus> numa-domain 0 on pcib14 [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] ahci0: <Intel Patsburg AHCI SATA controller> port 0xcce8-0xccef,0xccf8-0xccfb,0xccf0-0xccf7,0xccfc-0xccff,0xccc0-0xccdf mem 0xdc8ff000-0xdc8ff7ff irq 20 at device 31.2 numa-domain 0 on pci0 [...] ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib15: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 [...] pci15: <ACPI PCI bus> numa-domain 0 on pcib15 [...] pci15: <dasp, performance counters> at device 14.1 (no driver attached) [...] pci15: <dasp, performance counters> at device 19.1 (no driver attached) [...] pci15: <dasp, performance counters> at device 19.4 (no driver attached) [...] pci15: <dasp, performance counters> at device 19.5 (no driver attached) [...] pcib16: <ACPI Host-PCI bridge> on acpi0 [...] pci16: <ACPI PCI bus> on pcib16 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xec000-0xeffff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1e4300001600 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1e4300001600 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1e4300001600 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1e4300001600 [...] device_attach: est3 attach returned 6 [...] Timecounter "TSC-low" frequency 1100000414 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] mfid0 numa-domain 0 on mfi0 [...] mfid0: 152064MB (311427072 sectors) RAID volume (no label) is optimal [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] uhub0 numa-domain 0 on usbus1 [...] uhub1 numa-domain 0 on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ses0 at ahciem0 bus 0 scbus5 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: pass0,cd0 in 'Slot 04', SATA Slot: scbus4 target 0 [...] cd0 at ahcich4 bus 0 scbus4 target 0 lun 0 [...] cd0: <TSSTcorp DVD-ROM SN-108FB D150> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub2 numa-domain 0 on uhub1 [...] uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 numa-domain 0 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] uhub2: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen0.3: <no manufacturer Gadget USB HUB> at usbus0 [...] uhub4 numa-domain 0 on uhub2 [...] uhub4: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 3> on usbus0 [...] uhub4: 6 ports with 6 removable, self powered [...] ugen0.4: <Avocent Keyboard/Mouse Function> at usbus0 [...] ukbd0 numa-domain 0 on uhub4 [...] ukbd0: <Keyboard> on usbus0 [...] kbd2 at ukbd0