/dev/nda0 Controller Capabilities/Features ================================ Vendor ID: 8086 Subsystem Vendor ID: 8086 Serial Number: PHBT814200BP016S Model Number: INTEL MEMPEK1J016GA Firmware Version: K4110440 Recommended Arb Burst: 0 IEEE OUI Identifier: 5c d2 e4 Multi-Path I/O Capabilities: Not Supported Max Data Transfer Size: 131072 bytes Sanitize Crypto Erase: Not Supported Sanitize Block Erase: Not Supported Sanitize Overwrite: Not Supported Sanitize NDI: Not Supported Sanitize NODMMAS: Undefined Controller ID: 0x0000 Version: 0.0.0 Traffic Based Keep Alive: Not Supported Controller Type: Not Reported Keep Alive Timer Not Supported Maximum Outstanding Commands Not Specified Admin Command Set Attributes ============================ Security Send/Receive: Not Supported Format NVM: Supported Firmware Activate/Download: Supported Namespace Management: Not Supported Device Self-test: Not Supported Directives: Not Supported NVMe-MI Send/Receive: Not Supported Virtualization Management: Not Supported Doorbell Buffer Config: Not Supported Get LBA Status: Not Supported Sanitize: Not Supported Abort Command Limit: 4 Async Event Request Limit: 4 Number of Firmware Slots: 1 Firmware Slot 1 Read-Only: No Per-Namespace SMART Log: No Error Log Page Entries: 64 Number of Power States: 4 Firmware Update Granularity: 00 (Not Reported) Host Buffer Preferred Size: 0 bytes Host Buffer Minimum Size: 0 bytes NVM Command Set Attributes ========================== Submission Queue Entry Size Max: 64 Min: 64 Completion Queue Entry Size Max: 16 Min: 16 Number of Namespaces: 1 Compare Command: Not Supported Write Uncorrectable Command: Supported Dataset Management Command: Supported Write Zeroes Command: Not Supported Save Features: Not Supported Reservations: Not Supported Timestamp feature: Supported Verify feature: Not Supported Fused Operation Support: Not Supported Format NVM Attributes: All-NVM Erase, All-NVM Format Volatile Write Cache: Not Present